ICAN Carbon Wheels
#26
Junior Member
Thread Starter
Join Date: Oct 2014
Location: Winnemucca, Nevada
Posts: 19
Bikes: Cannondale CAAD 10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
HAHA of course! I only have this one on my phone currently but I will post more detailed pictures in my later updates.
Here is a link to amazon where I purchased the wheels
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Here is a link to amazon where I purchased the wheels
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
#27
Senior Member
Join Date: Apr 2007
Posts: 131
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have about 600 miles on a set of 50mm iCANs that I bought through Amazon. They occasionally stock them. I paid $474. They came in at 1580g on my scale.
They have remained true. Rear dish is about 2mm out and whatever they use for spoke prep resulted in twisting spokes when I tried to touch it up so I left it as-is. The rear wheel brakes a little bit unevenly, feeling as if the friction surface is variable some how.
They are stiffer laterally than the Roval 32 CLX wheels on my S-WORKS but don't brake nearly as well. I've never ridden them in the rain.
I thought the quick releases that came with them looked far too spindly so I did not use them.
They have remained true. Rear dish is about 2mm out and whatever they use for spoke prep resulted in twisting spokes when I tried to touch it up so I left it as-is. The rear wheel brakes a little bit unevenly, feeling as if the friction surface is variable some how.
They are stiffer laterally than the Roval 32 CLX wheels on my S-WORKS but don't brake nearly as well. I've never ridden them in the rain.
I thought the quick releases that came with them looked far too spindly so I did not use them.
#28
Senior Member
Join Date: May 2010
Location: Antioch, IL
Posts: 2,330
Bikes: 2013 Synapse 4
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I've debated getting some upgraded rims for my Synapse4 (oem Fulcrum 7's) and I was considering a custom build AL rim or a factory rim like Boyd or such... but these cheap carbon wheels make me question whether or not this would be a better route. biggest reason for wanting a newer rim is mostly vanity, the Fulcrum decals are peeling off which is a bit unsightly, but they are true and functional, but I'm also intrigued by the wider rims as a way to potentially improve the comfort of the bike.
these cheap carbons sound like a way for me to try it out and see how I like it without breaking the bank, nice to see they are pretty well reviewed.
these cheap carbons sound like a way for me to try it out and see how I like it without breaking the bank, nice to see they are pretty well reviewed.
#29
Junior Member
Thread Starter
Join Date: Oct 2014
Location: Winnemucca, Nevada
Posts: 19
Bikes: Cannondale CAAD 10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have about 600 miles on a set of 50mm iCANs that I bought through Amazon. They occasionally stock them. I paid $474. They came in at 1580g on my scale.
They have remained true. Rear dish is about 2mm out and whatever they use for spoke prep resulted in twisting spokes when I tried to touch it up so I left it as-is. The rear wheel brakes a little bit unevenly, feeling as if the friction surface is variable some how.
They are stiffer laterally than the Roval 32 CLX wheels on my S-WORKS but don't brake nearly as well. I've never ridden them in the rain.
I thought the quick releases that came with them looked far too spindly so I did not use them.
They have remained true. Rear dish is about 2mm out and whatever they use for spoke prep resulted in twisting spokes when I tried to touch it up so I left it as-is. The rear wheel brakes a little bit unevenly, feeling as if the friction surface is variable some how.
They are stiffer laterally than the Roval 32 CLX wheels on my S-WORKS but don't brake nearly as well. I've never ridden them in the rain.
I thought the quick releases that came with them looked far too spindly so I did not use them.
#30
Senior Member
Join Date: Apr 2005
Location: Austin, TX
Posts: 8,276
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Dangit you guys have me about to pull the trigger on one of these options, although my experiment with Chinese carbon handlebars didn't go very well.
#31
Junior Member
Thread Starter
Join Date: Oct 2014
Location: Winnemucca, Nevada
Posts: 19
Bikes: Cannondale CAAD 10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
https://www.youtube.com/watch?v=dHJJ...89537045720758
What happened with the handlebars?
#32
Senior Member
Join Date: Apr 2005
Location: Austin, TX
Posts: 8,276
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
HAHA! DO IT! I was just in your position about a month ago. I found this youtube video where this guy bought a set of the 38 wheels and they worked well besides breaking a spoke here and there the rear spokes were replaced with different spokes the wheels were fine. The next set he bought was the ICAN 50mm with Sapim cx ray spokes and he claims they have held true and have not given him a problem since purchase. SO if you do pull the trigger make sure to get the sapim cx ray spokes.
https://www.youtube.com/watch?v=dHJJ...89537045720758
What happened with the handlebars?
https://www.youtube.com/watch?v=dHJJ...89537045720758
What happened with the handlebars?
#37
Senior Member
Join Date: Dec 2009
Location: Houston, TX
Posts: 28,682
Bikes: 1990 Romic Reynolds 531 custom build, Merlin Works CR Ti custom build, super light Workswell 066 custom build
Mentioned: 109 Post(s)
Tagged: 1 Thread(s)
Quoted: 6556 Post(s)
Likes: 0
Liked 58 Times
in
36 Posts
Super light ceramic bearing wheelset 50mm clincher carbon wheels bicycle wheels | eBay
#38
Senior Member
Join Date: Apr 2005
Location: Austin, TX
Posts: 8,276
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Here you go. About 1550g. When you add both width and depth to a rim, as well as it being a clincher, you have to expect the weight to go up.
Super light ceramic bearing wheelset 50mm clincher carbon wheels bicycle wheels | eBay
Super light ceramic bearing wheelset 50mm clincher carbon wheels bicycle wheels | eBay
I'm also looking at these: https://www.amazon.com/Queen-Bike-Cl...cm_wl_huc_item
They have a version of the same wheel but with a 'Superteam logo that has a decent number of very positive reviews including some long term ones.
#39
Senior Member
Join Date: Dec 2009
Location: Houston, TX
Posts: 28,682
Bikes: 1990 Romic Reynolds 531 custom build, Merlin Works CR Ti custom build, super light Workswell 066 custom build
Mentioned: 109 Post(s)
Tagged: 1 Thread(s)
Quoted: 6556 Post(s)
Likes: 0
Liked 58 Times
in
36 Posts
I have a pair of onlycarbonwheels tubular rims. They have been excellent. Built up easily and with even tensions. Low profile so no comments about aero characteristics. Very good dry stopping with Swisstop Black Prince pads. I don't ride in the wet, so I can't say about that.
Are the competitors offering ceramic bearings for that price? I wouldn't pay extra for ceramic, but if it is included...
Are the competitors offering ceramic bearings for that price? I wouldn't pay extra for ceramic, but if it is included...
#40
Junior Member
Thread Starter
Join Date: Oct 2014
Location: Winnemucca, Nevada
Posts: 19
Bikes: Cannondale CAAD 10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Never mounted them and decided to stress test them a little off the bike. I put one end of the bar against my chest and grabbed the other end with both hands and pulled it towards me. I immediately heard cracking. I was applying a decent amount of force to get it to do that - they weren't complete noodles at least. However I'm a bigger guy and torque the bars pretty good when I sprint. Anyway needless to say I wouldn't feel comfortable putting them on my bike. I'm probably going to plunk down $300 bucks at some point for some 3t's.
#41
wears long socks
1550 is ok - 1700+ is a little heavy. Any long term reviews on wheels purchased from this seller? With the Sapim spokes and 25mm rim they come out to as much as the Icans/Yoeleo/Carbonzone which all have a pretty good reputation long term.
I'm also looking at these: https://www.amazon.com/Queen-Bike-Cl...cm_wl_huc_item
They have a version of the same wheel but with a 'Superteam logo that has a decent number of very positive reviews including some long term ones.
I'm also looking at these: https://www.amazon.com/Queen-Bike-Cl...cm_wl_huc_item
They have a version of the same wheel but with a 'Superteam logo that has a decent number of very positive reviews including some long term ones.
8oz of water weighs half a pound..
#43
wears long socks
#44
Senior Member
Join Date: Apr 2005
Location: Austin, TX
Posts: 8,276
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Yep it is heavy. A lot of wheels in this build class come in at 1500 grams or less. That is concerning for a few reasons, not the least of which is WHY are they that much heavier. Is it something with the build? Something that could also affect the quality of the build? The concern isn't just dragging the extra weight around - although if you think about it if you multiply that extra 1/3 to 1/2 pound x however many thousands of revolutions it becomes a little more considerable as well.
#46
wears long socks
Yep it is heavy. A lot of wheels in this build class come in at 1500 grams or less. That is concerning for a few reasons, not the least of which is WHY are they that much heavier. Is it something with the build? Something that could also affect the quality of the build? The concern isn't just dragging the extra weight around - although if you think about it if you multiply that extra 1/3 to 1/2 pound x however many thousands of revolutions it becomes a little more considerable as well.
I'm also aware that the power you use to spin your wheels is less than .5% of the power required to propel your bicycle. Much like weight on the bicycle itself, weight on the wheels may calculate to cost you xx% more power, but the total percent to the efficiency of the bike plus rider is very, very small.
Don't believe me? Use your finger to spin your rear wheel at the hub. See how little energy/force is needed to spin your wheel? Make it 10% lighter, and it is 10% easier than what was already easy.
#47
wears long socks
Considering (very generally) cycling is three times more efficient than walking, hiking weight weenies make more sense than cycling weight weenies.
#48
Senior Member
Join Date: Apr 2005
Location: Austin, TX
Posts: 8,276
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Look, I'm not going to argue. That much extra weight simply raises a flag. I have aluminium clinchers that are lighter.
#49
Senior Member
Join Date: Apr 2005
Location: Austin, TX
Posts: 8,276
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I ended up pulling the trigger on the 86mm version on Amazon. We'll see how it goes. I have a history of being very hard on wheels which is part of why I went with the 86's - I figure they will be a little more durable especially until I drop some weight (I haven't been riding much the past couple of years). If they work out I'll also get either some 38's or 50's in a few months.
One reason I pulled the trigger is that on some of them I saw a couple of long term reviews where they were still very happy with them. Figure that's a pretty good sign.
One reason I pulled the trigger is that on some of them I saw a couple of long term reviews where they were still very happy with them. Figure that's a pretty good sign.
#50
Senior Member
Join Date: Nov 2012
Location: Lincoln Nebraska
Posts: 1,088
Bikes: 99 Klein Quantum, 2012 Cannondale CAAD10 5, Specialized Tarmac Comp, Foundry Thresher, Fuji Sportif
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 98 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I ended up pulling the trigger on the 86mm version on Amazon. We'll see how it goes. I have a history of being very hard on wheels which is part of why I went with the 86's - I figure they will be a little more durable especially until I drop some weight (I haven't been riding much the past couple of years). If they work out I'll also get either some 38's or 50's in a few months.
One reason I pulled the trigger is that on some of them I saw a couple of long term reviews where they were still very happy with them. Figure that's a pretty good sign.
One reason I pulled the trigger is that on some of them I saw a couple of long term reviews where they were still very happy with them. Figure that's a pretty good sign.