Addiction LXXIV
#2851
Serious Cyclist
Join Date: Aug 2011
Location: RVA
Posts: 9,308
Bikes: Emonda SL6
Mentioned: 97 Post(s)
Tagged: 1 Thread(s)
Quoted: 5721 Post(s)
Liked 261 Times
in
99 Posts
So I have a bit of a dilemma. Have the Bike MS event this weekend so I'll be doing centuries sat/sun. I have a new chain in a box plus a lightly used cassette, and my current chain/cassette are a bit worn and leading to some jumpy shifts.
I know it's not a difficult task to swap a chain and cassette, but I'm highly averse to changing anything on my bike before a big ride or a race because it seems like simple things can still go wrong. I can swap the bits tonight and do a shakedown tomorrow, but I could also just leave things as-is and deal with the occasional missed shift... wwyd?
I did replace an upper headset bearing on Tuesday that cured the most obnoxious creaking sound when out of the saddle, so at least my BIG $ STEED is riding smooth and silent these days.
I know it's not a difficult task to swap a chain and cassette, but I'm highly averse to changing anything on my bike before a big ride or a race because it seems like simple things can still go wrong. I can swap the bits tonight and do a shakedown tomorrow, but I could also just leave things as-is and deal with the occasional missed shift... wwyd?
I did replace an upper headset bearing on Tuesday that cured the most obnoxious creaking sound when out of the saddle, so at least my BIG $ STEED is riding smooth and silent these days.
#2852
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,270
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 561 Post(s)
Tagged: 2 Thread(s)
Quoted: 22771 Post(s)
Liked 9,169 Times
in
4,253 Posts
So I have a bit of a dilemma. Have the Bike MS RACE this weekend so I'll be doing centuries sat/sun. I have a new chain in a box plus a lightly used cassette, and my current chain/cassette are a bit worn and leading to some jumpy shifts.
I know it's not a difficult task to swap a chain and cassette, but I'm highly averse to changing anything on my bike before a big ride or a race because it seems like simple things can still go wrong. I can swap the bits tonight and do a shakedown tomorrow, but I could also just leave things as-is and deal with the occasional missed shift... wwyd?
I did replace an upper headset bearing on Tuesday that cured the most obnoxious creaking sound when out of the saddle, so at least my BIG $ STEED is riding smooth and silent these days.
I know it's not a difficult task to swap a chain and cassette, but I'm highly averse to changing anything on my bike before a big ride or a race because it seems like simple things can still go wrong. I can swap the bits tonight and do a shakedown tomorrow, but I could also just leave things as-is and deal with the occasional missed shift... wwyd?
I did replace an upper headset bearing on Tuesday that cured the most obnoxious creaking sound when out of the saddle, so at least my BIG $ STEED is riding smooth and silent these days.
p.s. fixed your post for you. You are welcome.
#2854
smelling the roses
Join Date: Nov 2010
Location: Tixkokob, Yucatán, México
Posts: 15,320
Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5
Mentioned: 104 Post(s)
Tagged: 1 Thread(s)
Quoted: 7081 Post(s)
Liked 901 Times
in
612 Posts
I unpacked the bikes this morning. It seems they didn't like the way the Trek fork was fastened to the frame. downtube to chainstays. They removed it, removed the pipe wrap, and threw it back in. They must have been looking for that anthrax powder that's known to be hidden that way. The Centurion fork is fastened top tube to seat stays. That one they left alone. Regarding the Trek fork, they may have been fresh out of zip ties, but I know they had tape, and know how to use it. It's these kinds of activities that earn them such high regard from the people they serve.
Hmm. There's no emoji for spitting. Sad!
Hmm. There's no emoji for spitting. Sad!
__________________
Last edited by seedsbelize; 05-30-19 at 12:57 PM.
#2855
smelling the roses
Join Date: Nov 2010
Location: Tixkokob, Yucatán, México
Posts: 15,320
Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5
Mentioned: 104 Post(s)
Tagged: 1 Thread(s)
Quoted: 7081 Post(s)
Liked 901 Times
in
612 Posts
If the gasoline which powers my car is produced in Mexico, can I still call it Freedom molecules? When is the last time you had yourself a big ol' serving of Freedom fries?
Can you tell I'm recently back from the belly of the beast?
Can you tell I'm recently back from the belly of the beast?
#2858
Coffin Dodger
Join Date: Mar 2013
Location: New Hampshire
Posts: 2,138
Bikes: Motobecane Vent Noir, Lynskey R345, Serotta Nova Special X
Mentioned: 11 Post(s)
Tagged: 1 Thread(s)
Quoted: 794 Post(s)
Liked 292 Times
in
143 Posts
So I have a bit of a dilemma. Have the Bike MS event this weekend so I'll be doing centuries sat/sun. I have a new chain in a box plus a lightly used cassette, and my current chain/cassette are a bit worn and leading to some jumpy shifts.
I know it's not a difficult task to swap a chain and cassette, but I'm highly averse to changing anything on my bike before a big ride or a race because it seems like simple things can still go wrong. I can swap the bits tonight and do a shakedown tomorrow, but I could also just leave things as-is and deal with the occasional missed shift... wwyd?
I did replace an upper headset bearing on Tuesday that cured the most obnoxious creaking sound when out of the saddle, so at least my BIG $ STEED is riding smooth and silent these days.
I know it's not a difficult task to swap a chain and cassette, but I'm highly averse to changing anything on my bike before a big ride or a race because it seems like simple things can still go wrong. I can swap the bits tonight and do a shakedown tomorrow, but I could also just leave things as-is and deal with the occasional missed shift... wwyd?
I did replace an upper headset bearing on Tuesday that cured the most obnoxious creaking sound when out of the saddle, so at least my BIG $ STEED is riding smooth and silent these days.
Seriously you don’t want to spoil your chainrings
Just swap it, shake it down and go
#2859
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 45,303
Bikes: everywhere
Mentioned: 74 Post(s)
Tagged: 1 Thread(s)
Quoted: 13052 Post(s)
Liked 7,980 Times
in
4,248 Posts
So I have a bit of a dilemma. Have the Bike MS event this weekend so I'll be doing centuries sat/sun. I have a new chain in a box plus a lightly used cassette, and my current chain/cassette are a bit worn and leading to some jumpy shifts.
I know it's not a difficult task to swap a chain and cassette, but I'm highly averse to changing anything on my bike before a big ride or a race because it seems like simple things can still go wrong. I can swap the bits tonight and do a shakedown tomorrow, but I could also just leave things as-is and deal with the occasional missed shift... wwyd?
I did replace an upper headset bearing on Tuesday that cured the most obnoxious creaking sound when out of the saddle, so at least my BIG $ STEED is riding smooth and silent these days.
I know it's not a difficult task to swap a chain and cassette, but I'm highly averse to changing anything on my bike before a big ride or a race because it seems like simple things can still go wrong. I can swap the bits tonight and do a shakedown tomorrow, but I could also just leave things as-is and deal with the occasional missed shift... wwyd?
I did replace an upper headset bearing on Tuesday that cured the most obnoxious creaking sound when out of the saddle, so at least my BIG $ STEED is riding smooth and silent these days.
Get the chain length right, easy if current chain is right and new cassette is same tooth count.
Watch your spacers.
And be prepared to adjust limits a bit if not exact same model cassette (only needed occasionally)
Last edited by LesterOfPuppets; 05-30-19 at 01:47 PM.
#2860
Super Modest
Join Date: Jun 2002
Location: Central Illinois
Posts: 23,566
Bikes: Trek Emonda, Giant Propel, Colnago V3, Co-Motion Supremo, ICE VTX WC
Mentioned: 107 Post(s)
Tagged: 1 Thread(s)
Quoted: 11039 Post(s)
Liked 4,783 Times
in
2,180 Posts
I unpacked the bikes this morning. It seems they didn't like the way the Trek fork was fastened to the frame. downtube to chainstays. They removed it, removed the pipe wrap, and threw it back in. They must have been looking for that anthrax powder that's known to be hidden that way. The Centurion fork is fastened top tube to seat stays. That one they left alone. Regarding the Trek fork, they may have been fresh out of zip ties, but I know they had tape, and know how to use it. It's these kinds of activities that earn them such high regard from the people they serve.
Hmm. There's no emoji for spitting. Sad!
Hmm. There's no emoji for spitting. Sad!
Lastly, I watched several bikes coming out of the hold of a plane one time and the handlers tossed the boxes across the tarmac like frisbees... seriously.
__________________
Keep the chain tight!
#2861
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
Swap it.
#2863
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 45,303
Bikes: everywhere
Mentioned: 74 Post(s)
Tagged: 1 Thread(s)
Quoted: 13052 Post(s)
Liked 7,980 Times
in
4,248 Posts
Smang it!
#2864
Administrator
Thread Starter
Join Date: Apr 2005
Location: Hudson Valley, NY
Posts: 33,124
Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92
Mentioned: 327 Post(s)
Tagged: 2 Thread(s)
Quoted: 12045 Post(s)
Liked 6,840 Times
in
3,563 Posts
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
#2865
Administrator
Thread Starter
Join Date: Apr 2005
Location: Hudson Valley, NY
Posts: 33,124
Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92
Mentioned: 327 Post(s)
Tagged: 2 Thread(s)
Quoted: 12045 Post(s)
Liked 6,840 Times
in
3,563 Posts
Must be supply and demand, costing me 4 bills-plus to Phoenix from NY.
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
#2866
Senior Member
So I have a bit of a dilemma. Have the Bike MS event this weekend so I'll be doing centuries sat/sun. I have a new chain in a box plus a lightly used cassette, and my current chain/cassette are a bit worn and leading to some jumpy shifts.
I know it's not a difficult task to swap a chain and cassette, but I'm highly averse to changing anything on my bike before a big ride or a race because it seems like simple things can still go wrong. I can swap the bits tonight and do a shakedown tomorrow, but I could also just leave things as-is and deal with the occasional missed shift... wwyd?
I did replace an upper headset bearing on Tuesday that cured the most obnoxious creaking sound when out of the saddle, so at least my BIG $ STEED is riding smooth and silent these days.
I know it's not a difficult task to swap a chain and cassette, but I'm highly averse to changing anything on my bike before a big ride or a race because it seems like simple things can still go wrong. I can swap the bits tonight and do a shakedown tomorrow, but I could also just leave things as-is and deal with the occasional missed shift... wwyd?
I did replace an upper headset bearing on Tuesday that cured the most obnoxious creaking sound when out of the saddle, so at least my BIG $ STEED is riding smooth and silent these days.
Last edited by Rowan; 05-30-19 at 05:25 PM.
#2867
Senior Member
We've flown to Europe with our tandem a few times and all but once, they opened the bike box and shifted stuff around and repacked it by just throwing stuff back in. The box has a frame inside similar to a trainer where the fork attaches to a mount. It's usually undone. Also, our old tandem had a 250 mm rear disc and twice the rotor was bent badly and took a lot of judicious tweaking to get it true again.
Lastly, I watched several bikes coming out of the hold of a plane one time and the handlers tossed the boxes across the tarmac like frisbees... seriously.
Lastly, I watched several bikes coming out of the hold of a plane one time and the handlers tossed the boxes across the tarmac like frisbees... seriously.
You perhaps should indicate where the disregard by airline unloaders and security staff occurred.
Suffice to say I have never seen any of these occur in Australian airline travel.
#2868
Senior Member
Just slightly getting back to randonnees, Machka and I head to the northern part of our island state later today for her to officiate a 400km event. Considering winter weather has arrived here, it could be interesting to see how the three riders go (yes, I know, only three riders, but definitely one of them is heading to PBP in a couple of month, as it is the first time for him, it's good practice -- not that he needs much because he has become one the state's very skilled long-distance riders.
It will be fours days for us away from home as we will be riding our bikes on much shorter unofficial rides to get me back into a little bit of practice.
It will be fours days for us away from home as we will be riding our bikes on much shorter unofficial rides to get me back into a little bit of practice.
#2870
Farmer tan
So I have a bit of a dilemma. Have the Bike MS event this weekend so I'll be doing centuries sat/sun. I have a new chain in a box plus a lightly used cassette, and my current chain/cassette are a bit worn and leading to some jumpy shifts.
I know it's not a difficult task to swap a chain and cassette, but I'm highly averse to changing anything on my bike before a big ride or a race because it seems like simple things can still go wrong. I can swap the bits tonight and do a shakedown tomorrow, but I could also just leave things as-is and deal with the occasional missed shift... wwyd?
I did replace an upper headset bearing on Tuesday that cured the most obnoxious creaking sound when out of the saddle, so at least my BIG $ STEED is riding smooth and silent these days.
I know it's not a difficult task to swap a chain and cassette, but I'm highly averse to changing anything on my bike before a big ride or a race because it seems like simple things can still go wrong. I can swap the bits tonight and do a shakedown tomorrow, but I could also just leave things as-is and deal with the occasional missed shift... wwyd?
I did replace an upper headset bearing on Tuesday that cured the most obnoxious creaking sound when out of the saddle, so at least my BIG $ STEED is riding smooth and silent these days.
#2871
Administrator
Thread Starter
Join Date: Apr 2005
Location: Hudson Valley, NY
Posts: 33,124
Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92
Mentioned: 327 Post(s)
Tagged: 2 Thread(s)
Quoted: 12045 Post(s)
Liked 6,840 Times
in
3,563 Posts
I must be overlooking something in Phx every time I go.
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
#2872
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
I was negligent and forgot to Strava, but I'm pretty sure that we fulfilled the birthday ride -
Likes For WhyFi:
#2873
Farmer tan
I found my youngest son's small Chrono aero helmet in the garage from 10 years ago.
Surprising how fast he outgrew it and the bike.
Get lots of rides in while you can.
#2875
So it is
Join Date: Sep 2008
Location: Westminster, CO
Posts: 21,494
Bikes: Luzerne, 684, Boreas, Wheelhouse, Alize©®, Bayamo, Cayo
Mentioned: 247 Post(s)
Tagged: 1 Thread(s)
Quoted: 11499 Post(s)
Liked 4,914 Times
in
2,839 Posts
Just slightly getting back to randonnees, Machka and I head to the northern part of our island state later today for her to officiate a 400km event. Considering winter weather has arrived here, it could be interesting to see how the three riders go (yes, I know, only three riders, but definitely one of them is heading to PBP in a couple of month, as it is the first time for him, it's good practice -- not that he needs much because he has become one the state's very skilled long-distance riders.
It will be fours days for us away from home as we will be riding our bikes on much shorter unofficial rides to get me back into a little bit of practice.
It will be fours days for us away from home as we will be riding our bikes on much shorter unofficial rides to get me back into a little bit of practice.
Have fun on your journey, @Rowan and @Machka!