Weird behavior on Edelux 2 Light
#1
Senior Member
Thread Starter
Join Date: May 2014
Posts: 1,532
Bikes: Working on replacing my stolen Soma Buena Vista Mixte
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 417 Post(s)
Liked 95 Times
in
44 Posts
Weird behavior on Edelux 2 Light
I have a new bike, with an Edelux 2. Something is a bit off, and I can't seem to properly describe it. So the light field seems absurdly short, the light is topping out at around 2 meters ahead. Then the light just seems to bunch up and not illuminate any further. I can't see any issues with the mounting, and I haven't ridden much at night yet - but the light pattern is different than I remember on my previous bike.
Should troubleshooting start with the hub, wires, wiring, or light?
Should troubleshooting start with the hub, wires, wiring, or light?
#3
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,397
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,698 Times
in
2,518 Posts
is it mounted at a different height? Seems like you just need to aim it up a bit more. I always find that a bit annoying. Particularly on the IQ-X, where it's really easy to break the mount
My criteria is mostly to illuminate warning signs from a distance, but not up close. Then I go out and ride some steep hills and see if it is too scary at the bottom. Usually have to aim up a little more for that,.
My criteria is mostly to illuminate warning signs from a distance, but not up close. Then I go out and ride some steep hills and see if it is too scary at the bottom. Usually have to aim up a little more for that,.
#4
Senior Member
Thread Starter
Join Date: May 2014
Posts: 1,532
Bikes: Working on replacing my stolen Soma Buena Vista Mixte
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 417 Post(s)
Liked 95 Times
in
44 Posts
is it mounted at a different height? Seems like you just need to aim it up a bit more. I always find that a bit annoying. Particularly on the IQ-X, where it's really easy to break the mount
My criteria is mostly to illuminate warning signs from a distance, but not up close. Then I go out and ride some steep hills and see if it is too scary at the bottom. Usually have to aim up a little more for that,.
My criteria is mostly to illuminate warning signs from a distance, but not up close. Then I go out and ride some steep hills and see if it is too scary at the bottom. Usually have to aim up a little more for that,.
Hmm, that is a possibility. Will take a look and take a pic...there is a special upside down mount version right too?
#5
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,470 Times
in
1,435 Posts
German law requires bike headlights to have a certain beam shape. There must be a sharp cutoff at the top of the beam to prevent blinding people. This is a good thing. It also mandates a maximum power, which I think is a bad thing. To make use of the lower power, the makers work hard to get the most out of the little power the lights emit. The specially shaped reflector puts most of the energy at the top of the beam. By aiming the light right, the light spreads as if it is shone from above, i.e. the close part of the field to the bike is not brighter than the far part. Definitely make sure the light isn't upside down, but I'm guessing it's not. Make sure it's aimed high enough. If your mechanics are used to lights made for the American market, they will point it down to prevent blinding people. A German spec light should be pointed straight ahead.
Try to ride close to a wall or some pillars and see where the top of the beam is on vertical surfaces. It should be right at the height of the light or maybe a tiny bit lower. This will ensure it doesn't go into anyone's eyes.
One nice thing about the German law is that these lights work well elsewhere. They don't have to have different designs for different markets. They mass produce these lights, and they're not terribly expensive.
Another annoying thing about the law is that it doesn't allow for flashing headlights or taillights. The authors claim flashing lights are too distractive. Clearly, many of us disagree.
Try to ride close to a wall or some pillars and see where the top of the beam is on vertical surfaces. It should be right at the height of the light or maybe a tiny bit lower. This will ensure it doesn't go into anyone's eyes.
One nice thing about the German law is that these lights work well elsewhere. They don't have to have different designs for different markets. They mass produce these lights, and they're not terribly expensive.
Another annoying thing about the law is that it doesn't allow for flashing headlights or taillights. The authors claim flashing lights are too distractive. Clearly, many of us disagree.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#6
Senior Member
I bought this bracket for keeping my edelux 2 mounted upright while positioned beneath my rack. https://velo-orange.com/collections/...-light-bracket
There is an edelux 2 designed to be mounted upside down but I decided to just go with the standard one and get a suitable bracket.
There is an edelux 2 designed to be mounted upside down but I decided to just go with the standard one and get a suitable bracket.
#7
Senior Member
Thread Starter
Join Date: May 2014
Posts: 1,532
Bikes: Working on replacing my stolen Soma Buena Vista Mixte
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 417 Post(s)
Liked 95 Times
in
44 Posts
German law requires bike headlights to have a certain beam shape. There must be a sharp cutoff at the top of the beam to prevent blinding people. This is a good thing. It also mandates a maximum power, which I think is a bad thing. To make use of the lower power, the makers work hard to get the most out of the little power the lights emit. The specially shaped reflector puts most of the energy at the top of the beam. By aiming the light right, the light spreads as if it is shone from above, i.e. the close part of the field to the bike is not brighter than the far part. Definitely make sure the light isn't upside down, but I'm guessing it's not. Make sure it's aimed high enough. If your mechanics are used to lights made for the American market, they will point it down to prevent blinding people. A German spec light should be pointed straight ahead.
Try to ride close to a wall or some pillars and see where the top of the beam is on vertical surfaces. It should be right at the height of the light or maybe a tiny bit lower. This will ensure it doesn't go into anyone's eyes.
One nice thing about the German law is that these lights work well elsewhere. They don't have to have different designs for different markets. They mass produce these lights, and they're not terribly expensive.
Another annoying thing about the law is that it doesn't allow for flashing headlights or taillights. The authors claim flashing lights are too distractive. Clearly, many of us disagree.
Try to ride close to a wall or some pillars and see where the top of the beam is on vertical surfaces. It should be right at the height of the light or maybe a tiny bit lower. This will ensure it doesn't go into anyone's eyes.
One nice thing about the German law is that these lights work well elsewhere. They don't have to have different designs for different markets. They mass produce these lights, and they're not terribly expensive.
Another annoying thing about the law is that it doesn't allow for flashing headlights or taillights. The authors claim flashing lights are too distractive. Clearly, many of us disagree.
The upside down hypothesis is a good one actually.
#8
Go Ride
It is mounted around the same height as I had on my previous bike. Underneath a front rack. Right now it is only illuminating a tiny bit ahead on the road...but I also don't exactly know how far it is lighting up. It is definitely stopping abruptly just ahead of my bike on the road. Max 6 feet ahead....
Hmm, that is a possibility. Will take a look and take a pic...there is a special upside down mount version right too?
Hmm, that is a possibility. Will take a look and take a pic...there is a special upside down mount version right too?
#9
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,470 Times
in
1,435 Posts
@jade408, maybe your previous one was upside down and you got used to it. It is supposed to be bunched up at the far end. It will reach out farther and spread out if you point it higher.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Metaluna
Electronics, Lighting, & Gadgets
22
10-22-17 09:26 AM
Chris_F
Electronics, Lighting, & Gadgets
0
10-02-10 07:47 AM