Was there a "Jump the Shark" moment for high flange hubs?
#26
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,509
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7354 Post(s)
Liked 2,488 Times
in
1,443 Posts
@ksryder is right about the proper use and abuse of the term jump the shark.
It was in about 1975 or 1976 when I asked a bike shop owner why low flange hubs were coming into style. He said they give a softer ride since the spokes of the wheel are longer. Of course, that is bunk, but the bike world believed it for a long time, and some still believe it. I don't know why Merckx preferred them, and it's possible for anyone to come up with a belief like this and believe they feel the difference, even a highly competent champion. Jobst Brandt measured the forces going on in bicycle wheels, and he pointed out that that the tension is along the length of spokes, not across them like a diving board. The size difference between high and low flange hubs is negligible, too. Most importantly, even if one wheel is radially stiffer than another, the difference is lost in the compliance of a pneumatic tire.
I am also among those who think high flange hubs look better, not because I think they ride better or worse.
It was in about 1975 or 1976 when I asked a bike shop owner why low flange hubs were coming into style. He said they give a softer ride since the spokes of the wheel are longer. Of course, that is bunk, but the bike world believed it for a long time, and some still believe it. I don't know why Merckx preferred them, and it's possible for anyone to come up with a belief like this and believe they feel the difference, even a highly competent champion. Jobst Brandt measured the forces going on in bicycle wheels, and he pointed out that that the tension is along the length of spokes, not across them like a diving board. The size difference between high and low flange hubs is negligible, too. Most importantly, even if one wheel is radially stiffer than another, the difference is lost in the compliance of a pneumatic tire.
I am also among those who think high flange hubs look better, not because I think they ride better or worse.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#27
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
I'll see your bacon slicer and your cheese shredder, and raise you a Maxi-car!
The old Frenchies tell me that the purpose of high-flange hubs in the old randonneur sphere had a practical aspect. You can change a broken spoke with the freewheel on the wheel - and the wheel still on the bike! With a double walled rim, you won't even need to deflate the tire.
There is also a drum brake on the other side, but that only accounts for one of the flanges being so high. These are riveted flanges. René Herse made some himself as well. Some low-flange Maxi-car hubs had keyhole spoke holes so that the spokes could be removed that way, again without removing the freewheel.
The old Frenchies tell me that the purpose of high-flange hubs in the old randonneur sphere had a practical aspect. You can change a broken spoke with the freewheel on the wheel - and the wheel still on the bike! With a double walled rim, you won't even need to deflate the tire.
There is also a drum brake on the other side, but that only accounts for one of the flanges being so high. These are riveted flanges. René Herse made some himself as well. Some low-flange Maxi-car hubs had keyhole spoke holes so that the spokes could be removed that way, again without removing the freewheel.
Likes For scarlson:
#28
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,649
Bikes: It's complicated.
Mentioned: 1300 Post(s)
Tagged: 0 Thread(s)
Quoted: 4688 Post(s)
Liked 5,832 Times
in
2,295 Posts
wait a second, you can't drop that kind of bike porn in our laps and not tell us anything about it!!
is it new or vintage?
Who made it?
how did you get it?
The whole "let's rivet some big flanges to a hub shell" thing is a curious style of hub, and is something I was searching for when I offered the Harden Bacon Slicers as an example. Thanks for reading my mind and coming up with an answer!
Steve in Peoria
is it new or vintage?
Who made it?
how did you get it?
The whole "let's rivet some big flanges to a hub shell" thing is a curious style of hub, and is something I was searching for when I offered the Harden Bacon Slicers as an example. Thanks for reading my mind and coming up with an answer!
Steve in Peoria
There's two guys that I know of that are doing the super big flange blingie hubs - Curtis Odom, who typically starts with a big block of aluminum and turns them down, and Amir Avitzur, who does the rivet thing. These are obviously riveted, so they're from Amir. I bought them second hand from eBay.
The hubs are on my Pimp Eroica Gran(d) Sport(s) bike. I built this up out of a frame that I had repainted (well, powder coated), then had fun with it. English frame, mostly period correct french bits. Drillium chainrings and brake levers, gold colored brakes, gold colored freewheel...I feel like I should be wearing a big gold chain around my neck when I ride it. Here's my Flickr album of the build. I've riden it on the last two Eroica's and will come with me to Cino this year.
You find these riveted type hubs right after WWII. Maybe the machining tools to mill the big flanges wasn't readily available, more likely raw material was scarce, so turning down a small flange hub out of smaller stock, then machining the flanges out of plate was more cost effective.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#29
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
You find these riveted type hubs right after WWII. Maybe the machining tools to mill the big flanges wasn't readily available, more likely raw material was scarce, so turning down a small flange hub out of smaller stock, then machining the flanges out of plate was more cost effective.
And those really large riveted flanges are not concentric, let me tell you. Doesn't really matter, as long as you compensate when truing the wheel. It's like they did the flange on a mill with a rotary table and then just slapped it on there.
Modern day, I'd be tempted to waterjet cut the flanges from sheet, and rivet them to Shimano hub barrels, which are forged and cheap and reliable and serviceable. Sadly, in my opinion, boutique machined hubs jumped the shark in terms of unnecessary "features" sometime in the early 2000s, but nobody seems to have noticed or cared.
Last edited by scarlson; 08-14-19 at 11:45 AM.
Likes For scarlson:
#30
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,649
Bikes: It's complicated.
Mentioned: 1300 Post(s)
Tagged: 0 Thread(s)
Quoted: 4688 Post(s)
Liked 5,832 Times
in
2,295 Posts
;-)
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#31
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
Oh, I agree with fashion, that's not what I have beef with. Who can argue with bling, after all? I know I ride faster on a good-looking bike, just because I don't wanna let the thing down by being slow.
My problem is the unnecessarily thick axles at the expense of smaller bearings, the loud, unreliable ratchets, the cantilevered axle that I thought we got away from by getting freehubs, the play adjustment controlled with a setscrew, or worse yet, with nothing at all. I've had Hadleys and Whites and Phils and some off-brands and they're all the same, beautiful but at what cost! I keep coming back to old reliable Shimano, even though they are pedestrian.
In fact, I have half a mind to draw up the CAD and bug my buddy to run me off a few large-flanges to rivet onto Shimano hubs. I've tried to put magneto bearings and dual labyrinth seals in an old XT rear hub, but sadly that is impossible without machining and hardening a custom bearing race at least on one side.
My problem is the unnecessarily thick axles at the expense of smaller bearings, the loud, unreliable ratchets, the cantilevered axle that I thought we got away from by getting freehubs, the play adjustment controlled with a setscrew, or worse yet, with nothing at all. I've had Hadleys and Whites and Phils and some off-brands and they're all the same, beautiful but at what cost! I keep coming back to old reliable Shimano, even though they are pedestrian.
In fact, I have half a mind to draw up the CAD and bug my buddy to run me off a few large-flanges to rivet onto Shimano hubs. I've tried to put magneto bearings and dual labyrinth seals in an old XT rear hub, but sadly that is impossible without machining and hardening a custom bearing race at least on one side.
Likes For scarlson:
#33
Full Member
I associate high flange hubs with track bikes, sometime around the mid-thirties is when the boom started. The riveted Airlite was prewar, later versions the flange was pressed on. Harden made drilled and non-drilled versions, the non drilled version “bacon slicers” made the most sense because the point was for lateral stiffness on banked tracks, also the reason for tied and soldered spokes. When they started removing material for lightness they lost the stiffness, hey but they looked really cool. The Harden is a one piece hub with sealed bearings, amazingly I was able to find new replacements that fit hubs from the forties. They did make a cup and cone version as well called the Flywate.
Likes For St33lWh33ls:
Likes For the sci guy:
#35
Senior Member
Join Date: Apr 2017
Location: Los Angeles, CA
Posts: 2,249
Bikes: 1964 Legnano Roma Olympiade, 1973 Raleigh Super Course, 1978 Raleigh Super Course, 1978 Peugeot PR10, 2002 Specialized Allez, 2007 Specialized Roubaix, 2013 Culprit Croz Blade
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 741 Post(s)
Liked 818 Times
in
421 Posts
All my vintage bikes have high flange, mostly Campy. The dates of my bikes are 1961 Legnano to 1978 Peugeot and Raleigh. The Peugeot has Normandy and the Raleighs have been upgraded to Campy. They are great riding wheels, and I can't imagine riding other than high flange on vintage. I also have a modernish 2013 carbon Culprit with disc brakes, and Token wheels with high flange hubs, though they are all black. They look better in shiny aluminium.
My fave, Campy high flange, these are on my '73 Super Course.
Normandies on the '78 Pug.
My '64 Legnano with Legnano branded Campys.
These were tossed in with a barn find bike I bought. They even look good, dirty. Don't know who cut the spokes😡
These came on my '64 Legnano.
Modern carbon with Token black high flange hubs, carbon rims. Hgh flange lives!
My fave, Campy high flange, these are on my '73 Super Course.
Normandies on the '78 Pug.
My '64 Legnano with Legnano branded Campys.
These were tossed in with a barn find bike I bought. They even look good, dirty. Don't know who cut the spokes😡
These came on my '64 Legnano.
Modern carbon with Token black high flange hubs, carbon rims. Hgh flange lives!
Last edited by Slightspeed; 08-14-19 at 02:19 PM.
#36
Senior Member
Join Date: Apr 2017
Location: Los Angeles, CA
Posts: 2,249
Bikes: 1964 Legnano Roma Olympiade, 1973 Raleigh Super Course, 1978 Raleigh Super Course, 1978 Peugeot PR10, 2002 Specialized Allez, 2007 Specialized Roubaix, 2013 Culprit Croz Blade
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 741 Post(s)
Liked 818 Times
in
421 Posts
Addition to above post.
Normandy 78 on my Peugeot. Not as pretty as Campy, but still roll pretty well.
Normandy front on the Pug.
Modern Token high flange. Rear is high/low, front is high flange both sides.
Normandy 78 on my Peugeot. Not as pretty as Campy, but still roll pretty well.
Normandy front on the Pug.
Modern Token high flange. Rear is high/low, front is high flange both sides.
#37
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,482
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1830 Post(s)
Liked 3,392 Times
in
1,586 Posts
There's two guys that I know of that are doing the super big flange blingie hubs - Curtis Odom, who typically starts with a big block of aluminum and turns them down, and Amir Avitzur, who does the rivet thing. These are obviously riveted, so they're from Amir. I bought them second hand from eBay.
I'm familiar with Amir from the CR list, but didn't realize he was making these. The CR list (and probably BF) is full of guys who do amazing work but keep a low profile.
The hubs are on my Pimp Eroica Gran(d) Sport(s) bike. I built this up out of a frame that I had repainted (well, powder coated), then had fun with it. English frame, mostly period correct french bits. Drillium chainrings and brake levers, gold colored brakes, gold colored freewheel...I feel like I should be wearing a big gold chain around my neck when I ride it. Here's my Flickr album of the build. I've riden it on the last two Eroica's and will come with me to Cino this year.
The drilled hubs, chain rings, and brake levers do tie the parts together, though. Very cool!
The discussion of riveted flanges reminds me that I did see some at the 2015 NAHBS. there was a bike at the Speedhound booth with this style of hub.
Again, it was a show bike, so the flanges were blue and brass washers were used under the spoke heads.
The flanges weren't outrageously large or perforated with dozens of holes. For a show bike, it was only moderately over the top.
No idea who made the hubs... might have been the frame builder, I suppose.
Steve in Peoria
#38
Senior Member
I always liked high flanges myself. This thread is generating some awesome eye candy for sure.
My tastes can be low brow. I always had a strange affection for the modest Campy Tipo high flange hubs.
(Photo linked from Velobase/Kommisar89)
I guy in my club BITD had the campy hi/low hubs. I thought those were super cool at the time. Maybe that's why I ride White T11 hubs now; they're the modern version.
That's just sad when that happens.
With humongous amounts of determination, you could probably still get that freewheel off.
My tastes can be low brow. I always had a strange affection for the modest Campy Tipo high flange hubs.
(Photo linked from Velobase/Kommisar89)
I guy in my club BITD had the campy hi/low hubs. I thought those were super cool at the time. Maybe that's why I ride White T11 hubs now; they're the modern version.
With humongous amounts of determination, you could probably still get that freewheel off.
#39
Senior Member
I always liked high flanges myself. This thread is generating some awesome eye candy for sure.
My tastes can be low brow. I always had a strange affection for the modest Campy Tipo high flange hubs.
(was going to link a photo, but can't do that with bb tags anymore evidently)
I guy in my club BITD had the campy hi/low hubs. I thought those were super cool at the time. Maybe that's why I ride White T11 hubs now; they're the modern version.
That's just sad when that happens.
With humongous amounts of determination, you could probably still get that freewheel off.
My tastes can be low brow. I always had a strange affection for the modest Campy Tipo high flange hubs.
(was going to link a photo, but can't do that with bb tags anymore evidently)
I guy in my club BITD had the campy hi/low hubs. I thought those were super cool at the time. Maybe that's why I ride White T11 hubs now; they're the modern version.
With humongous amounts of determination, you could probably still get that freewheel off.
#40
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,062
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3016 Post(s)
Liked 3,810 Times
in
1,411 Posts
#41
Senior Member
Join Date: Apr 2017
Location: Los Angeles, CA
Posts: 2,249
Bikes: 1964 Legnano Roma Olympiade, 1973 Raleigh Super Course, 1978 Raleigh Super Course, 1978 Peugeot PR10, 2002 Specialized Allez, 2007 Specialized Roubaix, 2013 Culprit Croz Blade
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 741 Post(s)
Liked 818 Times
in
421 Posts
I always liked high flanges myself. This thread is generating some awesome eye candy for sure.
My tastes can be low brow. I always had a strange affection for the modest Campy Tipo high flange hubs.
(was going to link a photo, but can't do that with bb tags anymore evidently)
I guy in my club BITD had the campy hi/low hubs. I thought those were super cool at the time. Maybe that's why I ride White T11 hubs now; they're the modern version.
That's just sad when that happens.
With humongous amounts of determination, you could probably still get that freewheel off.
My tastes can be low brow. I always had a strange affection for the modest Campy Tipo high flange hubs.
(was going to link a photo, but can't do that with bb tags anymore evidently)
I guy in my club BITD had the campy hi/low hubs. I thought those were super cool at the time. Maybe that's why I ride White T11 hubs now; they're the modern version.
That's just sad when that happens.
With humongous amounts of determination, you could probably still get that freewheel off.
#42
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,062
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3016 Post(s)
Liked 3,810 Times
in
1,411 Posts
American Classic have been selling high-flange hubs for at least a decade. Never intended for C&V.
#43
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,398 Times
in
2,093 Posts
Either way, AC has always been a bit of a boutique brand that never necessarily followed the trend, wouldn't you say?
-Kurt
#44
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,062
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3016 Post(s)
Liked 3,810 Times
in
1,411 Posts
I was reading AC's site looking for a clue, couldn't find one. I am only familiar with when I wanted a high-flange set for my off-topic bike 10 years ago, so I can't speak to following trends. I do recall other companies other than GB, Sun and AC selling high flange then, I just chose AC.
Likes For iab:
#45
Senior Member
Cleanest method would be to take apart the freewheel body, build a temporary wheel, and then either get the freewheel back together in place, or just place the body in a vise and torque it off in the usual way.
You might be able to cut the freewheel body off with a dremel wheel if you are very very careful. Obviously it would be risky. The idea is to cut just not quite through, and then force it open enough to unscrew easily.
There are other hare brained schemes that would probably work.
#46
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,398 Times
in
2,093 Posts
Lace the outer flange to a junk rim. Use whatever spokes you can find, and stick them in whatever holes to get them roughly radially laced and tensioned enough to somewhat suspend the hub and make it resistant to rotational force.
Then try removing the freewheel normally. If it doesn't work, keep playing around with the spoke arrangement until you can get it strong enough. Keep at it. It will work.
Been here, done that.
-Kurt
#47
Senior Member
Thread Starter
Join Date: Aug 2010
Location: south kansas america
Posts: 1,913
Bikes: too many
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 413 Post(s)
Liked 236 Times
in
141 Posts
I think I would use two identical 1/2" thick (or so) sheets of somewhat soft wood (cut to the same outside perimeter dimensions). One slotted just enough to slip past the center of the inside portion of the hub, with a center hole just big enough to clear the cone area of the hub. The second block I would cut a hole big enough for the outer concave cone area portion of the hub. Then, I would drill matching holes for bolts, maybe one in each of the jelly bean cutouts on the free flange of the hub thru both pieces of wood simultaneously. Then some more bolt holes about an inch or so outside of the flange perimeter. Then, I would bolt the two pieces of the wood together, over the free flange, carefully tensioning the bolts until the wood made ample contact around and with the flange of the hub. Then, I'd clamp the wood in a vise, and see if I could get the free wheel loose. The idea is to obtain enough clamping force between the wood and the flange to provide resistance to break free the freewheel, yet not transfer any of that load directly to the hub. The wood provides the "sacrificial" barrier to carry the load, and not the hub.
#48
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,849
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,056 Times
in
1,256 Posts
1930's one piece tandem track hubs, machined out of billet aluminum by Doc Morton. The outside of the flange have a steep angle to maintain stiffness, You can see the thickness of the flange in the cutouts, not very far from the spoke holes.
Likes For clubman:
#49
Full Member
Man those are stout, make the Hardens look flimsy.
Likes For St33lWh33ls:
#50
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,398 Times
in
2,093 Posts
-Kurt