Front Derailleur Esoteric Quest
#1
Señor Member
Thread Starter
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,923
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,090 Times
in
638 Posts
Front Derailleur Esoteric Quest
Let me describe the situation. I have a bicycle that is set up as an 81 speed. In order to keep gearing in the range of mere mortals, I went with a front triple with 34-36-40 gearing. In theory, it should be a breeze to find a front derailleur that can handle the massive 6-tooth gap, but I have an issue.
I can't lower the FD any further to get it any closer to the chainrings because it will hit the cable and chainstay.
This shows the chainline when at the limit. I have fiddled with angling the derailleur, but in order for it to reliably shift to the inner chain, it ends up hitting the tire.
Does anyone know of a FD that can handle the triple that either has a shallower angle, or which has an adjustable angle (like the old Simplex FDs)? Hoping to find something that doesn't cost more than the frame did.
I can't lower the FD any further to get it any closer to the chainrings because it will hit the cable and chainstay.
This shows the chainline when at the limit. I have fiddled with angling the derailleur, but in order for it to reliably shift to the inner chain, it ends up hitting the tire.
Does anyone know of a FD that can handle the triple that either has a shallower angle, or which has an adjustable angle (like the old Simplex FDs)? Hoping to find something that doesn't cost more than the frame did.
__________________
In search of what to search for.
In search of what to search for.
#2
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,905
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,928 Times
in
2,553 Posts
Or, modify that one. My thought - drill for a #2 or #4 screw though the outside plate, run a nice neat SS pan head from the outside, through the outer plate, through a bushing made from aluminum or steel tubing, though a washer, through the cutout on the inner cage plate, through another washer and a lock washer and nut or just a red locktite'd nut. Cut off the bottom of the cage. Could look like it was made that way.
Ben, the guy who enjoys making bikes different. (I have three I could show you for inspiration.)
Ben, the guy who enjoys making bikes different. (I have three I could show you for inspiration.)
Likes For 79pmooney:
#3
Senior Member
Join Date: Aug 2015
Posts: 3,299
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 1143 Post(s)
Liked 1,740 Times
in
961 Posts
I would try a MTB triple type it may have a smaller arc, and double check your chainline. It takes one heck of a spindle to have the Maxi tripled from double.
#4
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,513
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,395 Times
in
2,092 Posts
Paging our resident constructeur @gugie.
Yes. That type of modification.
Alternatively, would anyone know the dimensions of the current Tiagra FD-4700? Looks pretty short.
-Kurt
Yes. That type of modification.
Alternatively, would anyone know the dimensions of the current Tiagra FD-4700? Looks pretty short.
-Kurt
#5
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 919 Post(s)
Liked 745 Times
in
546 Posts
either an old shimano 60 or 600ex will do it and clear the stay. i have tried both in very similar circumstance. the 600ex is currently still in operation on a 39/36/24 half step on one of my gran turismos. the shimano 60 would work except the tail end is a bit too short and the chain rubs when down in the granny. iow's, it can clear the stay, handle the triple shift, but not the amount of drop
Likes For thook:
#6
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,829 Times
in
1,995 Posts
This is C&V, Campagnolo Gran Sport, cage is rotatable.
#7
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,800 Times
in
2,284 Posts
Paging our resident constructeur @gugie.
Yes. That type of modification.
Alternatively, would anyone know the dimensions of the current Tiagra FD-4700? Looks pretty short.
-Kurt
Yes. That type of modification.
Alternatively, would anyone know the dimensions of the current Tiagra FD-4700? Looks pretty short.
-Kurt
That's all I've got.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#8
Señor Member
Thread Starter
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,923
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,090 Times
in
638 Posts
Or, modify that one. My thought - drill for a #2 or #4 screw though the outside plate, run a nice neat SS pan head from the outside, through the outer plate, through a bushing made from aluminum or steel tubing, though a washer, through the cutout on the inner cage plate, through another washer and a lock washer and nut or just a red locktite'd nut. Cut off the bottom of the cage. Could look like it was made that way.
Ben, the guy who enjoys making bikes different. (I have three I could show you for inspiration.)
Ben, the guy who enjoys making bikes different. (I have three I could show you for inspiration.)
Paging our resident constructeur @gugie.
Yes. That type of modification.
Alternatively, would anyone know the dimensions of the current Tiagra FD-4700? Looks pretty short.
-Kurt
Yes. That type of modification.
Alternatively, would anyone know the dimensions of the current Tiagra FD-4700? Looks pretty short.
-Kurt
That looks like it would be a viable answer - presuming it's a bottom pull and would come with an adapter for a 28.6 seat tube. I can look that up.
Other points about C&Vyness are taken, however this project has already strayed so far from purity, it is no longer really a concern of mine.
__________________
In search of what to search for.
In search of what to search for.
Likes For USAZorro:
#9
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,800 Times
in
2,284 Posts
Oops, sorry, senior moment. I meant front derailleur, and I still recommend a Cyclone MkII
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#10
small ring
Join Date: Jul 2012
Location: PNW
Posts: 1,025
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 438 Post(s)
Liked 925 Times
in
370 Posts
Having been through a similar situation, there is no easy solution. The problem with moving the lower cage bolt up is that the plates don't line up, as 2nd photo shows. The problem with using a MTB triple is the small difference in ring sizes. You would have to gap the inner plate to the middle ring, which would leave a large gap to the outer. That could work but the chain will overshift the big ring rather easily. Gevenalle makes a CX FD for slightly smaller rings but I don't know if it can handle a triple.
https://www.gevenalle.com/product/bu...nt-derailleur/
You might try to find a MTB triple FD with a large inner plate and then shave it down for better clearance.
https://www.gevenalle.com/product/bu...nt-derailleur/
You might try to find a MTB triple FD with a large inner plate and then shave it down for better clearance.
__________________
59 Allegro Special -- 72 Bob Jackson -- 74 Motobecane Grand Jubile -- 74 Sekine SHS 271 -- 80 Nishiki International
85 Shogun 800 -- 86 Tommasini Super Prestige -- 92 Specialized Rockhopper -- 17 Colnago Arabesque
59 Allegro Special -- 72 Bob Jackson -- 74 Motobecane Grand Jubile -- 74 Sekine SHS 271 -- 80 Nishiki International
85 Shogun 800 -- 86 Tommasini Super Prestige -- 92 Specialized Rockhopper -- 17 Colnago Arabesque
#11
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,798
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1393 Post(s)
Liked 1,326 Times
in
837 Posts
3 front * 7 cogs * 3 IGH, I presume? Cool! This reminds me of Charlie Harding's 90-speed bike, on display in his Westwood (Los Angeles) shop in the 1970s. I think he went 3x6 derailleur gears with a 5-speed IGH.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#12
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,496
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 583 Post(s)
Liked 698 Times
in
393 Posts
Coincidental post
either an old shimano 60 or 600ex will do it and clear the stay. i have tried both in very similar circumstance. the 600ex is currently still in operation on a 39/36/24 half step on one of my gran turismos. the shimano 60 would work except the tail end is a bit too short and the chain rubs when down in the granny. iow's, it can clear the stay, handle the triple shift, but not the amount of drop
Likes For sd5782:
#13
Senior Member
Join Date: Oct 2010
Posts: 8,515
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3241 Post(s)
Liked 2,512 Times
in
1,510 Posts
What about one of the Suntour Microdrive FDs? Those were made for small chainrings. Suntour BL FDs have small cages also.
https://velobase.com/ViewComponent.as...=113&AbsPos=64
https://velobase.com/ViewComponent.as...=113&AbsPos=64
Last edited by seypat; 01-22-21 at 02:52 PM.
Likes For seypat:
#14
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,751 Times
in
938 Posts
@USAZorro...
Eighty one speeds! Wow. I did see a guy, once outside of the liquor store, riding a home made 36 speed recimbent steed one day. I do wish that I had taken a picture but, alas, I did not.
I have a bicycle that is set up as an 81 speed.
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#15
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,513
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,395 Times
in
2,092 Posts
#16
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 919 Post(s)
Liked 745 Times
in
546 Posts
Newer old guy here so didn’t want to be laughed at when trying to get my Miyata 1000 from 48-38-28 to 42-34-24. My triple front wouldn’t get low enough for the 24 and looked bad. As you said a 600 from my local co-op did the trick. Might not translate to this situation, but shifted all 3 nicely.
nothing laughable about your change out, btw
#18
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,496
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 583 Post(s)
Liked 698 Times
in
393 Posts
600EX I think
600EX I think. Came from co-op but matches one from an 85 Centurion I have that is EX I think. Paid $5 so gave it an uneducated try with good results. With careful chain length tuning I get the 5 easiest gears on the 24T before the chain hits the Miyata chainstay protector hoop.
#19
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,798
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1393 Post(s)
Liked 1,326 Times
in
837 Posts
In the immortal words of Homer Simpson, "Doh!" My bad ...
What are you cog tooth counts in back?
0.75/1.00/1.33 IGH like a Sturmey AW, or other?
I presume you have already created a gear chart and shift diagram.
The closest I ever got was a 36-speed, with 3 in front and a 4-cog 14-16-18-20 block in back on an AW.
What are you cog tooth counts in back?
0.75/1.00/1.33 IGH like a Sturmey AW, or other?
I presume you have already created a gear chart and shift diagram.
The closest I ever got was a 36-speed, with 3 in front and a 4-cog 14-16-18-20 block in back on an AW.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#20
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,054 Times
in
1,254 Posts
As suggested, maybe a BL or Cyclone.
#21
Señor Member
Thread Starter
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,923
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,090 Times
in
638 Posts
In the immortal words of Homer Simpson, "Doh!" My bad ...
What are you cog tooth counts in back?
0.75/1.00/1.33 IGH like a Sturmey AW, or other?
I presume you have already created a gear chart and shift diagram.
The closest I ever got was a 36-speed, with 3 in front and a 4-cog 14-16-18-20 block in back on an AW.
What are you cog tooth counts in back?
0.75/1.00/1.33 IGH like a Sturmey AW, or other?
I presume you have already created a gear chart and shift diagram.
The closest I ever got was a 36-speed, with 3 in front and a 4-cog 14-16-18-20 block in back on an AW.
__________________
In search of what to search for.
In search of what to search for.
#22
Senior Member
Join Date: Dec 2005
Posts: 17,158
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3810 Post(s)
Liked 6,699 Times
in
2,611 Posts
What’s the length of the FD cage? I can route around in my deep FD bin to see if I have anything shorter.
#23
Senior Member
Join Date: Oct 2010
Posts: 8,515
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3241 Post(s)
Liked 2,512 Times
in
1,510 Posts
I think the Shimano 600 FD in question is a FD-6207.
#24
Junior Member
Some Suntour Mountech FD have a "step" or notch at the bottom of the cage to clear the cable and chainstay on touring bikes with lots of hanger drop.
Campagnolo 8/9 speed triple FD have short cages with inner plates that can clear half step chainring differences and smaller chainrings.
Shimano 9/10 speed trekking FD are available for the lesser angle between the seat tube-chainstay on frames with more hanger drop. The angle range is stamped on the back of the inner cage.
Campagnolo 8/9 speed triple FD have short cages with inner plates that can clear half step chainring differences and smaller chainrings.
Shimano 9/10 speed trekking FD are available for the lesser angle between the seat tube-chainstay on frames with more hanger drop. The angle range is stamped on the back of the inner cage.
#25
Señor Member
Thread Starter
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,923
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,090 Times
in
638 Posts
Center of seat tube to rear end 57mm (measured parallel to the ground - hoping this makes sense without resorting to drawings).
Haven't forgotten about the crankset, but I have practically every style besides cotterless road, and have been hoping to source one locally without success.
__________________
In search of what to search for.
In search of what to search for.