Conti 5000 tire pressure
#1
Senior Member
Thread Starter
Join Date: Dec 2010
Posts: 79
Likes: 0
Liked 0 Times
in
0 Posts
Conti 5000 tire pressure
I just bought these tires (700 X 25C). I wanted these tires to increase my speed for race day due to reduced tire resistance, as advertised, and the tire's popularity. I know it won't make a very large difference, but more speed is still better than less speed given the same degree of wattage I can produce. Based on your experience or knowledge, what tire pressure front and back will optimize milaegage improvement (whatever it may be)?
#2
52psi
Join Date: Aug 2013
Location: Tucson, AZ
Posts: 4,034
Bikes: Schwinn Volare ('78); Raleigh Competition GS ('79)
Liked 824 Times
in
405 Posts
Google 15% drop pressure, consult chart. Adjust to taste.
__________________
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
Likes For Fahrenheit531:
#3
Senior Member
Likes For RGMN:
#4
Obsessed with Eddington
Join Date: Jun 2013
Location: Brussels (BE) 🇧🇪
Posts: 1,332
Bikes: '16 Spesh Diverge, '14 Spesh Fatboy, '18 Spesh Epic, '18 Spesh SL6, '21 Spesh SL7, '21 Spesh Diverge...and maybe n+1?
Liked 621 Times
in
368 Posts
Also, invest in a decent standa lone pressure gauge to make sure you have the pressure where you want it...pump gauges are not reliable. They're good for getting in the ballpark, but are not reliably precise.
#6
Senior Member
As an example...I weigh about 160 and would run 85rr/75frt w/ 25mm tires. Especially Contis as they tend to be a little wider than stated size.
Likes For cxwrench:
#8
Senior Member
Likes For GhostRider62:
#9
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,850
Bikes: Merlin Cyrene, Nashbar steel CX
Liked 1,611 Times
in
1,059 Posts
Then go ride the tires and adjust the pressure as necessary after some test rides nrsmd. The outputs are not perfect, but without a lot of fuss will get you very close to a useful pressure from which to start experimenting with the right pressure.
Also, invest in a decent standa lone pressure gauge to make sure you have the pressure where you want it...pump gauges are not reliable. They're good for getting in the ballpark, but are not reliably precise.
Also, invest in a decent standa lone pressure gauge to make sure you have the pressure where you want it...pump gauges are not reliable. They're good for getting in the ballpark, but are not reliably precise.
#10
Obsessed with Eddington
Join Date: Jun 2013
Location: Brussels (BE) 🇧🇪
Posts: 1,332
Bikes: '16 Spesh Diverge, '14 Spesh Fatboy, '18 Spesh Epic, '18 Spesh SL6, '21 Spesh SL7, '21 Spesh Diverge...and maybe n+1?
Liked 621 Times
in
368 Posts
True, however, there are a couple of reasons an accurate pressure gauge are helpful, in my experience.
1) You need to start somewhere.
2) once you know what works fro a given surface with a given tire, it's helpful to know what the actual pressure is, so that you can replicate it without another round of trial and error.
1) You need to start somewhere.
2) once you know what works fro a given surface with a given tire, it's helpful to know what the actual pressure is, so that you can replicate it without another round of trial and error.
#11
Obsessed with Eddington
Join Date: Jun 2013
Location: Brussels (BE) 🇧🇪
Posts: 1,332
Bikes: '16 Spesh Diverge, '14 Spesh Fatboy, '18 Spesh Epic, '18 Spesh SL6, '21 Spesh SL7, '21 Spesh Diverge...and maybe n+1?
Liked 621 Times
in
368 Posts
#12
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,818
Bikes: Bikes??? Thought this was social media?!?
Liked 5,821 Times
in
2,502 Posts
To get the same feel of suppleness (as my Veloflex and Vittoria 25mm) on the 5000s, I have to reduce the pressure from my usual ~100 psi to about 85, thereby increasing the rolling resistance for me. Rider weight =190lbs.
In my opinion, the Conti 5000 may have slightly lower rolling resistance at equal tire pressure and (reportedly) good durability, but has a stiffer the ride quality than the comparable price competitors. If it proves out more durable in my riding conditions, that is a reasonable trade-off.
In my opinion, the Conti 5000 may have slightly lower rolling resistance at equal tire pressure and (reportedly) good durability, but has a stiffer the ride quality than the comparable price competitors. If it proves out more durable in my riding conditions, that is a reasonable trade-off.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Last edited by Wildwood; 08-01-21 at 02:17 PM.