Robin Hood Lenton Sports?
#26
Full Member
Thread Starter
Well, you mentioned touring. If you plan on packing a lot of stuff for a big trip, hit it with all the aluminum that you want. If you're just going to ride it near-by, under 20 miles, think about leaving the steel. In my opinion, the steel components have a smoother function. In '67, Britain was making some nice alloy brake sets, bars and stem, so you can have authenticity and performance, too.
#27
1991 PBP Anciens
Join Date: Nov 2009
Location: Elburn, Illannoy
Posts: 658
Bikes: 1954 Robin Hood, 1964 Dunelt, 1968 Raleigh Superbe, 1969 Robin Hood, 197? Gitane, 1973 Raleigh SuperCourse, 1981 Miyata 710, 1990 Miyata 600GT, 2007 Rivendell Bleriot
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 77 Post(s)
Liked 361 Times
in
144 Posts
You might be surprised how well a 50 year old bike does on a long ride.
#28
Full Member
Thread Starter
A little update on the RH Lenton Sports. I pulled a decent set of aluminum rimmed wheels with quick-release axles from a parts bike. I had to file the dropouts a bit to fit the larger axles, and I snipped the front fender stays open so they slip over the axle since the fork has no fender-mount lugs. Dia-Comp levers replaced the steel originals, and D-C side-pull calipers replace the Raleigh steel ones. I sourced a nice B17 saddle since the owner said "it came with a leather saddle but got wet and warped". I replaced the Huret Allivit RD with a Svelto from the same parts bike. Not a real upgrade I know, but it looks a bit lighter and is of the same period so I thought I'd try it. During a test-ride I noticed the pedals seem to be slightly bent. They are the common rat-trap types (Lyotards?) and I have another set from a bike I'm upgrading. I'll keep the steel bars and stem, as well as everything else stock. The frame is comfortable and rides nicely.
I know it's nothing historic, but it's still pretty unique and a good, vintage bike for my modest "collection".
I know it's nothing historic, but it's still pretty unique and a good, vintage bike for my modest "collection".
#29
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,863
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2300 Post(s)
Liked 2,066 Times
in
1,260 Posts
A little suggestion, next time file parallel flats on the axle instead of the frame. Axles are replaceable, frames less so.
Likes For clubman:
#30
Full Member
Thread Starter
I had considered filing flats on the axles, but I really didn't have to take much out - maybe 0.5 mm at most - to get them to fit. Getting the flats 180 degrees opposite on the axles and then having to line up the flats to mount wheels every time was a bit more daunting.
#31
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,863
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2300 Post(s)
Liked 2,066 Times
in
1,260 Posts
It's actually simpler than is seems with a handfile and vice. Then if you find an original set of wheels you like you won't have any orientation problems or slippage.
Next time.
Next time.
#32
Senior Member
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,998
Bikes: old ones
Mentioned: 305 Post(s)
Tagged: 0 Thread(s)
Quoted: 26481 Post(s)
Liked 10,448 Times
in
7,248 Posts
You can probably see what I replaced with alloy just looking at the photo. I found the original wheels to be vexatious, so once I replaced those with something a little lighter/newer, I just decided to go with what felt right.
original
original
original
original
original
How it eventually turned out. I have since mounted fenders on it, but they are far from authentic originals.
Last edited by 3alarmer; 05-12-22 at 11:34 AM.
Likes For 3alarmer:
#33
Senior Member
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,998
Bikes: old ones
Mentioned: 305 Post(s)
Tagged: 0 Thread(s)
Quoted: 26481 Post(s)
Liked 10,448 Times
in
7,248 Posts
#34
Full Member
Thread Starter
Last edited by swampyankee2; 05-12-22 at 11:48 AM.
Likes For swampyankee2:
#35
1991 PBP Anciens
Join Date: Nov 2009
Location: Elburn, Illannoy
Posts: 658
Bikes: 1954 Robin Hood, 1964 Dunelt, 1968 Raleigh Superbe, 1969 Robin Hood, 197? Gitane, 1973 Raleigh SuperCourse, 1981 Miyata 710, 1990 Miyata 600GT, 2007 Rivendell Bleriot
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 77 Post(s)
Liked 361 Times
in
144 Posts
Right. I read the Raleigh LS was last sold in 1962. The Robin Hood version came later (mine's a '67) and is a Lenton Sports in name only, built on a standard Hi-ten Raleigh Sports frame. In fact, when I posted a pic on the Lenton Sports and Variations FB group, no one had ever heard of it. I imagine it was only marketed it as a Lenton Sports outside of England where the name wouldn't have such an expectation of performance.
#36
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,863
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2300 Post(s)
Liked 2,066 Times
in
1,260 Posts
Right. I read the Raleigh LS was last sold in 1962. The Robin Hood version came later (mine's a '67) and is a Lenton Sports in name only, built on a standard Hi-ten Raleigh Sports frame. In fact, when I posted a pic on the Lenton Sports and Variations FB group, no one had ever heard of it. I imagine it was only marketed it as a Lenton Sports outside of England where the name wouldn't have such an expectation of performance.
England was blessed with high quality rides so of course, the faux LS's weren't made available. I think.
My first LS...wrong bars I think.
Last edited by clubman; 05-13-22 at 06:27 PM.