Drop bar vs flat bar tire clearance
#51
Senior Member
Join Date: Sep 2006
Location: Paradise, TX
Posts: 2,087
Bikes: Soma Pescadero, Surly Pugsley, Salsa Fargo, Schwinn Klunker, Gravity SS 27.5, Monocog 29er
Liked 234 Times
in
166 Posts
If you have suspension, flat bars are great. I ride a lot of bikes. On a rigid bike, drops are superior. The hand position makes it easier to soak up bumps with your arms, transfering lees of it to your neck. This does require the drops to be at a reasonable height, about where your grips on your flat bar would be on a well fitting bike.
#54
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,625
Bikes: 2023 Niner RLT 9 RDO, 2022 Trek Supercaliber, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Liked 8,954 Times
in
4,198 Posts
If you have suspension, flat bars are great. I ride a lot of bikes. On a rigid bike, drops are superior. The hand position makes it easier to soak up bumps with your arms, transfering lees of it to your neck. This does require the drops to be at a reasonable height, about where your grips on your flat bar would be on a well fitting bike.
__________________
Platypus gravelus.
Platypus gravelus.
#55
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,625
Bikes: 2023 Niner RLT 9 RDO, 2022 Trek Supercaliber, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Liked 8,954 Times
in
4,198 Posts
#56
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,719
Bikes: I have 3 singlespeed/fixed gear bikes
Liked 2,496 Times
in
1,287 Posts
Very few bikes out there have bars which are completely flat....Most of what people call flat bars have few mm of raise and few degrees of back sweep and they're not really flat. They should really be called riser bars.... Riser bars and more upright riding position are superior to drop bars when it comes to handling and control on pavement, gravel, singlestrack trails and city traffic.
#57
Guest
Likes For Rolla:
#58
Dirty Heathen
Join Date: Oct 2015
Location: MC-778, 6250 fsw
Posts: 2,273
Bikes: 1997 Cannondale, 1976 Bridgestone, 1998 SoftRide, 1989 Klein, 1989 Black Lightning #0033
Liked 984 Times
in
573 Posts
If you have suspension, flat bars are great. I ride a lot of bikes. On a rigid bike, drops are superior. The hand position makes it easier to soak up bumps with your arms, transfering lees of it to your neck. This does require the drops to be at a reasonable height, about where your grips on your flat bar would be on a well fitting bike.
The width of the bar helps with leverage, and the height and reach determine how easily you can adjust your weight distribution between your feet and your hands.
You’re conflating bar shape with a whole bunch of other setup factors. Bar shape is a secondary factor, and a comfort/ preference aspect at that.
Some of these gravel bars are approaching or are exceeding the width of the narrow straight bars we used to use BITD.
#59
Senior Member
In recent years there's been an increase in tire clearance for drop bar bikes. I've always viewed these massive clearances as somewhat unnecessary, because there's a tipping point where you're simply better off with a flat bar bike due to the improved handling a flat bar provides.
My question: What is the tipping point in regards to tire width where you're better off using flat bars?
My question: What is the tipping point in regards to tire width where you're better off using flat bars?
#60
Banned.
Join Date: Jan 2023
Location: CA
Posts: 9
Likes: 0
Liked 0 Times
in
0 Posts
Drop bar vs flat bar tire clearance
There is no definitive answer to this question as it depends on a number of factors, including the type of bike you are riding, the width of your tires, and your personal preference. That said, generally speaking, drop bars offer more clearance for wider tires than flat bars do. So if you are looking to run wider tires on your bike, drop bars may be the way to go.
One key difference between the two types of handlebars is tire clearance. Drop bar bikes typically have less tire clearance than flat bar bikes. This can be an issue if you want to run wider tires, such as 35mm or 40mm tires.
Some drop bar bike frames may only have enough clearance for 28mm tires. If you're considering a drop bar bike, make sure to check the tire clearance before buying. You may need to size up to a larger frame or choose a different model altogether if you want to run wider tires.
Ultimately, it's up to each rider to decide whether the benefits of using drop bars outweigh the drawbacks.
If you're interested in switching to drop handlebars, it's generally possible to do so with some minor modifications. You'll need to purchase new brake levers that are compatible with drop bars, as well as new shifters if your current ones aren't compatible. You may also need to get new cables and housing, depending on the differences between your old setup and the new one.
One key difference between the two types of handlebars is tire clearance. Drop bar bikes typically have less tire clearance than flat bar bikes. This can be an issue if you want to run wider tires, such as 35mm or 40mm tires.
Some drop bar bike frames may only have enough clearance for 28mm tires. If you're considering a drop bar bike, make sure to check the tire clearance before buying. You may need to size up to a larger frame or choose a different model altogether if you want to run wider tires.
Ultimately, it's up to each rider to decide whether the benefits of using drop bars outweigh the drawbacks.
If you're interested in switching to drop handlebars, it's generally possible to do so with some minor modifications. You'll need to purchase new brake levers that are compatible with drop bars, as well as new shifters if your current ones aren't compatible. You may also need to get new cables and housing, depending on the differences between your old setup and the new one.
#61
Advanced Slacker
Join Date: Feb 2017
Posts: 6,252
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Liked 2,571 Times
in
1,451 Posts
There is no definitive answer to this question as it depends on a number of factors, including the type of bike you are riding, the width of your tires, and your personal preference. That said, generally speaking, drop bars offer more clearance for wider tires than flat bars do. So if you are looking to run wider tires on your bike, drop bars may be the way to go.
One key difference between the two types of handlebars is tire clearance. Drop bar bikes typically have less tire clearance than flat bar bikes. This can be an issue if you want to run wider tires, such as 35mm or 40mm tires.
Some drop bar bike frames may only have enough clearance for 28mm tires. If you're considering a drop bar bike, make sure to check the tire clearance before buying. You may need to size up to a larger frame or choose a different model altogether if you want to run wider tires.
Ultimately, it's up to each rider to decide whether the benefits of using drop bars outweigh the drawbacks.
If you're interested in switching to drop handlebars, it's generally possible to do so with some minor modifications. You'll need to purchase new brake levers that are compatible with drop bars, as well as new shifters if your current ones aren't compatible. You may also need to get new cables and housing, depending on the differences between your old setup and the new one.
One key difference between the two types of handlebars is tire clearance. Drop bar bikes typically have less tire clearance than flat bar bikes. This can be an issue if you want to run wider tires, such as 35mm or 40mm tires.
Some drop bar bike frames may only have enough clearance for 28mm tires. If you're considering a drop bar bike, make sure to check the tire clearance before buying. You may need to size up to a larger frame or choose a different model altogether if you want to run wider tires.
Ultimately, it's up to each rider to decide whether the benefits of using drop bars outweigh the drawbacks.
If you're interested in switching to drop handlebars, it's generally possible to do so with some minor modifications. You'll need to purchase new brake levers that are compatible with drop bars, as well as new shifters if your current ones aren't compatible. You may also need to get new cables and housing, depending on the differences between your old setup and the new one.
#62
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,625
Bikes: 2023 Niner RLT 9 RDO, 2022 Trek Supercaliber, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Liked 8,954 Times
in
4,198 Posts
Likes For Eric F:
#63
Over the hill
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,426
Bikes: Giant Defy, Giant Revolt
Liked 1,265 Times
in
718 Posts
My question is why did they switch to riser bars and ditch the bar ends? I felt those bar ends were awesome for climbing, but maybe that's just because I was a roadie first and like climbing on the hoods.
__________________
It's like riding a bicycle
It's like riding a bicycle
#64
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,719
Bikes: I have 3 singlespeed/fixed gear bikes
Liked 2,496 Times
in
1,287 Posts
I have bar ends on my riser bars and yes they are awesome for getting extra leverage when climbing out of the saddle...I think the main reason why flat bars are not mainstream anymore is because riser bars provide much better handling and are more comfortable.
Likes For wolfchild:
#65
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,625
Bikes: 2023 Niner RLT 9 RDO, 2022 Trek Supercaliber, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Liked 8,954 Times
in
4,198 Posts
Nino Shurter takes it to another level...
__________________
Platypus gravelus.
Platypus gravelus.
#66
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 46,012
Bikes: everywhere
Liked 8,536 Times
in
4,548 Posts
Who is using riser bars? Looking at the bikes of the top World Cup XC riders, slammed stems and flat bars appears to the typical setup. Here's 9 bikes from one of last year's races... https://www.pinkbike.com/news/9-hard...-cup-2022.html
Nino Shurter takes it to another level...
Nino Shurter takes it to another level...
#67
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 46,012
Bikes: everywhere
Liked 8,536 Times
in
4,548 Posts
Sometime in the mid/late 90s riders decided that maybe 4" saddle to bar drop was a little extreme even for XC, so some went for riser bars.
#68
Over the hill
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,426
Bikes: Giant Defy, Giant Revolt
Liked 1,265 Times
in
718 Posts
Who is using riser bars? Looking at the bikes of the top World Cup XC riders, slammed stems and flat bars appears to the typical setup. Here's 9 bikes from one of last year's races... https://www.pinkbike.com/news/9-hard...-cup-2022.html
Nino Shurter takes it to another level...
Nino Shurter takes it to another level...
__________________
It's like riding a bicycle
It's like riding a bicycle
#69
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,625
Bikes: 2023 Niner RLT 9 RDO, 2022 Trek Supercaliber, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Liked 8,954 Times
in
4,198 Posts
Likes For Eric F:
#70
Guest
Likes For Rolla:
Likes For badger1:
#72
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,719
Bikes: I have 3 singlespeed/fixed gear bikes
Liked 2,496 Times
in
1,287 Posts
One of my bikes is set up with bar ends on the outside and on the inside. The outer bar ends are mostly for extra leverage when climbing hills or just to have a different hand position. The inner bar ends are really great when on a longer distance ride or when it's windy, it's just another extra hand position. Really like that set up and I am thinking of setting up my second bike the same way.,
#73
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 46,012
Bikes: everywhere
Liked 8,536 Times
in
4,548 Posts
One of my favorite barend setups for gravel riding and commuting was with controls on the barends, then I'd use the flat bars for climbing only.
I ditched the 130mm stem, put on a 90mm, put on a wishbone shifter for the front and thumbie for the rear.
I ditched the 130mm stem, put on a 90mm, put on a wishbone shifter for the front and thumbie for the rear.
Likes For LesterOfPuppets:
#74
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,323
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,332 Times
in
2,788 Posts
But. the big question (and to topic) what does that bar setup do to your tire clearances?
#75
Dirty Heathen
Join Date: Oct 2015
Location: MC-778, 6250 fsw
Posts: 2,273
Bikes: 1997 Cannondale, 1976 Bridgestone, 1998 SoftRide, 1989 Klein, 1989 Black Lightning #0033
Liked 984 Times
in
573 Posts
TT length is longer too, so there’s not the need to “stretch out” like you had on a 26er
Except for hard-core XC racers, the rider position is more upright, with a wider stance. No one runs 540mm bars on 150 stems anymore.
And for whatever reason, a riser on a short stem works better than a straight bar on a taller, angled one, even when the grips end up in the same spot
Likes For Ironfish653: