For People Who Ride Both on Flat and Clipless Pedals
#1
For People Who Ride Both on Flat and Clipless Pedals
Do people who want to ride on flats to improve technical skills and use clipless for cross country mountain biking, do you switch between pedals? Or, do you use the hybrid pedals that are both hybrid and clipless? Are there any disadvantages to the hybrid pedals? The reason I ask is that I almost always ride with clipless pedals. However, I'd like to work on rear wheel lift. Eventually, I might want to learn how to manual and bunny hop. I know that especially for the rear wheel lift I know that riding clipless can mask an improper technique.
#2
Advanced Slacker
Join Date: Feb 2017
Posts: 6,252
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Liked 2,571 Times
in
1,451 Posts
For mountain biking, I use one or the other. I’d never use hybrid pedals for actual mountain biking. Really bad idea IMO. Good for a commuter or maybe road/gravel use, not for MTB.
There is really only bike I use both on (most bikes are one or the other). I just swap pedals. Takes about a minute.
If you want to learn flats, get GOOD flats. There are many great options for ~$50. Deity Deftrap (my fav), Kona Wha Wha 2, One Up, RF Chester…. All good.
There is really only bike I use both on (most bikes are one or the other). I just swap pedals. Takes about a minute.
If you want to learn flats, get GOOD flats. There are many great options for ~$50. Deity Deftrap (my fav), Kona Wha Wha 2, One Up, RF Chester…. All good.
#3
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,626
Bikes: 2023 Niner RLT 9 RDO, 2022 Trek Supercaliber, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Liked 8,957 Times
in
4,199 Posts
I'm always clipped in on my MTB, so I don't have any personal experience with them, but on a MTB-focused forum I frequent, the general consensus seems to be that hybrid pedals are bad at both things.
__________________
Platypus gravelus.
Platypus gravelus.
#4
I have those kind of hybrid pedals on my touring bike at the moment. Funn single-sides. The flat/spikey side is fine. The clips are inferior to Shimano's own.
My wife has Deity pedals and really likes them, despite being a devote atheist.
My wife has Deity pedals and really likes them, despite being a devote atheist.
#5
Senior Member
Join Date: Sep 2006
Location: Paradise, TX
Posts: 2,087
Bikes: Soma Pescadero, Surly Pugsley, Salsa Fargo, Schwinn Klunker, Gravity SS 27.5, Monocog 29er
Liked 234 Times
in
166 Posts
Usually the first ride on flats, there will be a moment of panic feeling trapped coming up to a stop. I will push my right heel down and out, and it won't move. I will do a double take and then remember to just lift my foot off ...
Likes For c_m_shooter:
#6
Senior Member
I used to employ clipless when needing to be as efficient (fast) as possible and flats the rest of the time because they were more fun. I would just switch the pedals. My wife rides Shimano hybrids so she can unclip the left side when descending "dangerous" trails.
#7
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,395
Bikes: Too many to list
Liked 1,127 Times
in
748 Posts
I used to ride clipless on everything, including downhill
it’s only in the last couple of years, and after a knee replacement surgery, that I switched to flats
my cross-country bike is still wearing SPD’s, but my big travel trail bikes are gladly wearing flats still
The only thing I’ve been riding the past couple months is my e-bike though, which is like a monster truck in the trees. Way too much travel and brakes are stupid strong—- I don’t think it will ever see spots
it’s only in the last couple of years, and after a knee replacement surgery, that I switched to flats
my cross-country bike is still wearing SPD’s, but my big travel trail bikes are gladly wearing flats still
The only thing I’ve been riding the past couple months is my e-bike though, which is like a monster truck in the trees. Way too much travel and brakes are stupid strong—- I don’t think it will ever see spots
#8
Senior Member
I used to ride flats on my mountain bike. But my shins got mad at me after awhile. Maybe I just never learned to ride them properly, but ever since I switched to clipless I never took a pedal to the shin ever again.
#9
Steel is real
Join Date: Mar 2013
Location: Not far from Paris
Posts: 2,433
Bikes: 1992Giant Tourer,1992MeridaAlbon,1996Scapin,1998KonaKilaueua,1993Peugeot Prestige,1991RaleighTeamZ(to be upgraded),1998 Jamis Dragon,1992CTWallis(to be built),1998VettaTeam,1995Coppi(to be built),1993Grandis(to be built)
Liked 1,257 Times
in
835 Posts
Always used those XT PD-T 780/ XT PD-T 8000 never looked back since then
#10
After riding clipless on all my bikes for over 30 yrs I recently switched to flats on my bikepacking bike. It was quite a learning experience for me to get used to the flats (Crank Brothers Stamp 7’s). I still run clipless on my mountain, road, and fixed gear bikes….. the old classic eggbeaters…
#11
With a mighty wind
I’ve been riding mostly flats for the last year. It’s hard to reprogram myself from the previous 30.
Once I got accustomed to it, I noticed my overall pace/times were just as fast. And my uphill techie climbing is actually better.
I still ride clipped in on my road bikes and gravel bike, and occasionally will switch to SPD for long distances where the uniform pedaling circles is less fatiguing.
Hybrid pedals seem like they’d be ok for a spin bike or maybe a grocery getter. Not much else.
Once I got accustomed to it, I noticed my overall pace/times were just as fast. And my uphill techie climbing is actually better.
I still ride clipped in on my road bikes and gravel bike, and occasionally will switch to SPD for long distances where the uniform pedaling circles is less fatiguing.
Hybrid pedals seem like they’d be ok for a spin bike or maybe a grocery getter. Not much else.
Likes For sean.hwy:
#14
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 14,623
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Liked 4,553 Times
in
3,050 Posts
#15
Do people who want to ride on flats to improve technical skills and use clipless for cross country mountain biking, do you switch between pedals? Or, do you use the hybrid pedals that are both hybrid and clipless? Are there any disadvantages to the hybrid pedals? The reason I ask is that I almost always ride with clipless pedals. However, I'd like to work on rear wheel lift. Eventually, I might want to learn how to manual and bunny hop. I know that especially for the rear wheel lift I know that riding clipless can mask an improper technique.
#16
Cantilever believer
My mountain, touring, and "speedy cruiser" all have two-sided pedals (flat one side, SPD on the other). The only pure-SPD pedals I'm currently running are on the racer. They're fine for most riding. On the tourer and cruiser, I usually stay clipped in, while on the MTB I'll unclip n' flip in certain segments that have a higher risk of sudden horizontal stops (I don't bounce anymore when I hit the dirt & rocks, so I try to keep vertical or at least keep my involuntary dismounts somewhat graceful.)
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
#18
I decided it was best to switch pedals depending on what type of riding I'l be doing. I will use the flat pedals if I want to work on skills. I will be using the clipless pedals for my trail riding and racing.
Likes For AMoney:
#19
Full Member
I use Shimano hybrid pedals on a bike I leave at the grandkids' house. I ride clipped in when I ride alone, but use flats when with the kids. It is amazing how often you put your foot down when riding with a 6 year old.
Mike
Mike