WTB: 126mm 32h Hyperglide Cassette hub 6401 or sim
#1
Full Member
Thread Starter
Join Date: Jul 2019
Posts: 270
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 98 Post(s)
Likes: 0
Liked 154 Times
in
62 Posts
WTB: 126mm 32h Hyperglide Cassette hub 6401 or sim
Hi all, looking for a 32 hole, 126mm OLN spacing hyperglide hub, I believe FH-6401 is the ticket.
This is for a late 60's Italian frame with Campy NR brakes and mech so I'm looking for polished silver / correct looking if not technically "correct" parts. Must be 32 hole please.
Failing above I am open to earlier 126mm 32h uniglide hubs.
This is for a late 60's Italian frame with Campy NR brakes and mech so I'm looking for polished silver / correct looking if not technically "correct" parts. Must be 32 hole please.
Failing above I am open to earlier 126mm 32h uniglide hubs.
#2
Cat 6
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,482
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 184 Times
in
119 Posts
Well, it's DA instead of 600, and UG instead of HG, no skewer, but 32h, nice and shiny, includes the first position screw-on cog (12t), spins well and $25 + shipping. Which if you're CONUS, can't be too much.
LINK to the first of 3 pictures.
And there's a front hub, too, if you're looking for a matched set.
LINK to the first of 3 pictures.
And there's a front hub, too, if you're looking for a matched set.
__________________
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
#4
Cat 6
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,482
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 184 Times
in
119 Posts
#5
tantum vehi
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,445
Bikes: More than I care to admit
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 1169 Post(s)
Liked 994 Times
in
492 Posts
It’s best practice with DA 7401 hubs to also use the second position UG sprocket with the built in, splined spacer as a loose sprocket can protrude over the splines onto the threaded portion.
I purchased a bike and 7s DA hub that only used the threaded 1st position sprocket and the 2nd position, modified HG sprocket spun freely as it couldn’t engage the splines.
I’ve heard other people didn’t have this issue, but I sure did. YMMV.
I purchased a bike and 7s DA hub that only used the threaded 1st position sprocket and the 2nd position, modified HG sprocket spun freely as it couldn’t engage the splines.
I’ve heard other people didn’t have this issue, but I sure did. YMMV.