Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

In defense of Slime

Search
Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

In defense of Slime

Thread Tools
 
Search this Thread
 
Old 07-19-23, 09:08 AM
  #1  
rosefarts
With a mighty wind
Thread Starter
 
Join Date: May 2015
Posts: 2,806
Liked 1,061 Times in 601 Posts
In defense of Slime

Among the aficionados, the former mechanics, the home mechanics who do a good job, the people who regularly maintain their bikes, and those that generally take pride in their bikes, slime is despised.

Its green and messy. It’s cheap, it can be purchased almost anywhere. If a puncture happens, it’s a mess.

Here is the thing about it though, it’s not designed for any of our fancy pants bikes. Used for slow and heavy applications, I think it works better than any sealant out there. Stuff where you absolutely are not worried about a little extra weight and a flat would be a giant hassle.

Kids bikes, bike trailers, and my cargo bike this stuff is the best. I even put it in my wife’s road bike since she’s not so handy and not so careful. Things like pinch flats are still possible, it’s not a tank tread.

Its not for everything. Including kids bikes, there are 9 in my garage. 2 are slimed, 1 more is about to be slimed, 3 are tubeless, and the rest have tubes.

Just throwing that out there.
rosefarts is offline  
Likes For rosefarts:
Old 07-19-23, 09:42 AM
  #2  
Broctoon
Super-duper Genius
 
Broctoon's Avatar
 
Join Date: Aug 2016
Location: Muskrat Springs, Utah
Posts: 1,748
Liked 1,044 Times in 532 Posts
+1 on everything above.

I used Slime tubes a lot over the years in my kids' bikes, and they saved me a lot of trouble in flat repairs. I also buy bulk quantities of the slime for my lawn tractor tires. It's not the best choice for many of my bikes, but it has its place.
Broctoon is offline  
Likes For Broctoon:
Old 07-19-23, 09:44 AM
  #3  
rooster3323
Newbie
 
Join Date: Jul 2023
Posts: 5
Likes: 0
Liked 2 Times in 1 Post
Shoot

I used to use slime in all my bike tires when I was younger that stuff saved me a lot of time and money.
rooster3323 is offline  
Likes For rooster3323:
Old 07-19-23, 09:46 AM
  #4  
PeteHski
Senior Member
 
PeteHski's Avatar
 
Join Date: May 2021
Posts: 10,053
Liked 5,950 Times in 3,665 Posts
Slime is currently making a big comeback as a kids' fidget toy. So when my 10 year old daughter gets bored with it (probably by the end of the week) I can put it in her bike tyres.
PeteHski is offline  
Likes For PeteHski:
Old 07-19-23, 09:47 AM
  #5  
Troul 
Senior Member
 
Troul's Avatar
 
Join Date: Oct 2013
Location: Mich
Posts: 7,934

Bikes: RSO E-tire dropper fixie brifter

Liked 3,395 Times in 2,136 Posts
Didn't work out well in the 1 wheel for the double wheeled wheeled barrel.
__________________
-YMMV
Troul is offline  
Old 07-19-23, 10:18 AM
  #6  
HelpSingularity
Full Member
 
HelpSingularity's Avatar
 
Join Date: Jun 2022
Location: San Diego, California USA
Posts: 388

Bikes: 1974 Masi GC, 1982 Trek 728 (aka 720), 1992 Trek Multitrack 750 (Stolen), 2023 Bike Friday Diamond Llama (Fat Boi Edition)

Liked 316 Times in 165 Posts
I stayed in Bakersfield, CA (I know,) for a couple of years.
After wrestling with goathead thorns for a while I purchased "Slime" and put it in my tubes (removable presta valve core).
What a relief, no more flats from those needle-like thorns.
Nothing wrong with that stuff as far as I was able to ascertain.

Since then I have moved away from goathead thorn country.
I replaced the tires and tubes with Schwalbe Marathon Plus tires on my townie/commuter/tourer, sans "Slime".
That is working pretty good as well in terms of no flats.
HelpSingularity is offline  
Likes For HelpSingularity:
Old 07-19-23, 12:28 PM
  #7  
urbanknight
Over the hill
 
urbanknight's Avatar
 
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,431

Bikes: Giant Defy, Giant Revolt

Liked 1,265 Times in 718 Posts
I definitely find it amusing and ironic that I used to curse and swear under my breath every time a customer had me install slime in their tubes, yet here I am today squirting goo into all of my tires and happily keeping a shop towel nearby to clean up the inevitable spillage.

Edit: Still better than those tire liners!
__________________
It's like riding a bicycle
urbanknight is online now  
Likes For urbanknight:
Old 07-19-23, 01:58 PM
  #8  
CAT7RDR
Senior Member
 
Join Date: May 2017
Location: Hacienda Hgts
Posts: 2,213

Bikes: 1999 Schwinn Peloton Ultegra 10, Kestrel RT-1000 Ultegra, Trek Marlin 6 Deore 29'er

Liked 2,090 Times in 1,000 Posts
Originally Posted by HelpSingularity
I stayed in Bakersfield, CA (I know,) for a couple of years.
After wrestling with goathead thorns for a while I purchased "Slime" and put it in my tubes (removable presta valve core).
What a relief, no more flats from those needle-like thorns.
Nothing wrong with that stuff as far as I was able to ascertain.

Since then I have moved away from goathead thorn country.
I replaced the tires and tubes with Schwalbe Marathon Plus tires on my townie/commuter/tourer, sans "Slime".
That is working pretty good as well in terms of no flats.


Same here. The Marathon Green Guards are heavy but no flats in over a year.
Seems like more trouble to put sealant into a tube or tire rather than just having the right tire for the job at hand.
CAT7RDR is online now  
Likes For CAT7RDR:
Old 07-19-23, 03:56 PM
  #9  
Polaris OBark
ignominious poltroon
 
Polaris OBark's Avatar
 
Join Date: Jan 2022
Posts: 4,836
Liked 4,206 Times in 2,193 Posts
Originally Posted by rosefarts
I even put it in my wife’s road bike since she’s not so handy and not so careful.
I just did the same thing, but with Orange Seal endurance. I had even bought her nice Peaty's valve stems, but then I decided to do the experiment...

These are new Rene Herse Barlow Pass ELs. I've run them with and without tubes. Jan suggests putting sealant in tubes if you don't want the hassle of setting up tubeless. (On her rims, and with those tires, it is a hassle.)

Last edited by Polaris OBark; 07-19-23 at 04:00 PM.
Polaris OBark is offline  
Old 07-19-23, 04:09 PM
  #10  
georges1
Steel is real
 
georges1's Avatar
 
Join Date: Mar 2013
Location: Not far from Paris
Posts: 2,599

Bikes: 1992Giant Tourer,1992MeridaAlbon,1996Scapin,1998KonaKilaueua,1993Peugeot Prestige,1991RaleighTeamZ(to be upgraded),1998 Jamis Dragon,1992CTWallis(to be built),1998VettaTeam,1995Coppi(to be built),1993Grandis(to be built)

Liked 1,335 Times in 889 Posts
I am going to install slime tubes in all my road bikes projects.
georges1 is offline  
Old 07-19-23, 04:19 PM
  #11  
Chuck M 
Happy With My Bikes
 
Chuck M's Avatar
 
Join Date: Sep 2020
Location: Oklahoma
Posts: 2,504

Bikes: Hi-Ten bike boomers, a Trek Domane and some projects

Liked 2,823 Times in 1,291 Posts
I think Slime is like a lot of bicycle things. Whatever one does to their bike doesn't need defending. I have some 23s on my Raleigh that flat if I ride it within earshot of a sharp word, and if I get a wild hair to put Slime in them I don't ask for the blessings of random people on the Internet.
__________________
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke

Chuck M is offline  
Likes For Chuck M:
Old 07-19-23, 04:34 PM
  #12  
RCMoeur 
Cantilever believer
 
RCMoeur's Avatar
 
Join Date: Nov 2021
Location: Phoenix, AZ
Posts: 1,978
Liked 2,501 Times in 1,082 Posts
If it wouldn't consider the valve a hole in the tube and do all it could to plug it, I'd be happier with the stuff.

When I patch tubes for nonprofits, I consider Slime (or any sealant) a "first strike" against the tube, as I've had a number of situations where I patch the detectable hole(s), but then when fully repressurized several more holes slowly reveal themselves. Plus it's a 75% probability I have to replace the valve too. So if there's only one hole, I'll probably patch it, but two or more and it's tossed.
RCMoeur is offline  
Old 07-19-23, 10:36 PM
  #13  
rosefarts
With a mighty wind
Thread Starter
 
Join Date: May 2015
Posts: 2,806
Liked 1,061 Times in 601 Posts
Originally Posted by RCMoeur
If it wouldn't consider the valve a hole in the tube and do all it could to plug it, I'd be happier with the stuff.

When I patch tubes for nonprofits, I consider Slime (or any sealant) a "first strike" against the tube, as I've had a number of situations where I patch the detectable hole(s), but then when fully repressurized several more holes slowly reveal themselves. Plus it's a 75% probability I have to replace the valve too. So if there's only one hole, I'll probably patch it, but two or more and it's tossed.
I would never consider patching a slimed tube. I can't imagine that it would stay on.
rosefarts is offline  
Old 07-19-23, 10:56 PM
  #14  
RCMoeur 
Cantilever believer
 
RCMoeur's Avatar
 
Join Date: Nov 2021
Location: Phoenix, AZ
Posts: 1,978
Liked 2,501 Times in 1,082 Posts
Originally Posted by rosefarts
I would never consider patching a slimed tube. I can't imagine that it would stay on.
Patch adhesion hasn't been an issue with proper preparation, even if the tube has slime in it. Just don't squeeze the tube while roughing up the area or applying the vulcanizing fluid.
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
RCMoeur is offline  
Old 07-20-23, 12:29 AM
  #15  
CrimsonEclipse
Senior Member
 
Join Date: Dec 2004
Posts: 1,396
Liked 1,016 Times in 614 Posts
I just purchased good tires instead.
CrimsonEclipse is offline  
Old 07-20-23, 07:50 AM
  #16  
rosefarts
With a mighty wind
Thread Starter
 
Join Date: May 2015
Posts: 2,806
Liked 1,061 Times in 601 Posts
Originally Posted by CrimsonEclipse
I just purchased good tires instead.
Now you’re getting away from the whole idea.

Slime goes in kids bikes, Burley trailers, cargo bikes, and in the tubes on your heavier road wheels- commuting and training type of setups, typically with Gatorskins or similar.

This is where the slime haters come in. “My GP5000’s with latex tubes almost never get flats, you guys are just making a mess”.

I trust that most people have enough common sense to understand when slime is appropriate or not.
rosefarts is offline  
Old 07-20-23, 08:36 AM
  #17  
CAT7RDR
Senior Member
 
Join Date: May 2017
Location: Hacienda Hgts
Posts: 2,213

Bikes: 1999 Schwinn Peloton Ultegra 10, Kestrel RT-1000 Ultegra, Trek Marlin 6 Deore 29'er

Liked 2,090 Times in 1,000 Posts
So we have the robust tire crowd, and the Slimey tube teasers.
Who will triumph in this battle for the ages?
CAT7RDR is online now  
Likes For CAT7RDR:
Old 07-20-23, 08:45 AM
  #18  
t2p
Senior Member
 
t2p's Avatar
 
Join Date: May 2022
Location: USA - Southwest PA
Posts: 4,085

Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV

Liked 3,048 Times in 1,565 Posts
Slime is good stuff

sealed a tractor tire with a significant gash - enough to get the tractor back to the house
t2p is offline  
Old 07-20-23, 11:01 AM
  #19  
CrimsonEclipse
Senior Member
 
Join Date: Dec 2004
Posts: 1,396
Liked 1,016 Times in 614 Posts
Originally Posted by rosefarts
Now you’re getting away from the whole idea.

Slime goes in kids bikes, Burley trailers, cargo bikes, and in the tubes on your heavier road wheels- commuting and training type of setups, typically with Gatorskins or similar.

This is where the slime haters come in. “My GP5000’s with latex tubes almost never get flats, you guys are just making a mess”.

I trust that most people have enough common sense to understand when slime is appropriate or not.
Totally agree. Slime was designed for slow moving vehicles.
But on a commuting bike, they were worthless. (I have the same opinion on basic tire liners)
(note: I haven't tried the Tanis super liners or whatever they are called)
If you are an adult and biking for a living or biking remotely, good tires. Even on a Burley trailer.

Kids' bike: Yeah, I get it. $100 of quality tires on a $50 kid's bike is probably overkill.

Been stranded by Slime, not by a good tire.
CrimsonEclipse is offline  
Old 07-31-23, 09:20 AM
  #20  
Polaris OBark
ignominious poltroon
 
Polaris OBark's Avatar
 
Join Date: Jan 2022
Posts: 4,836
Liked 4,206 Times in 2,193 Posts
Originally Posted by Polaris OBark
I just did the same thing, but with Orange Seal endurance. I had even bought her nice Peaty's valve stems, but then I decided to do the experiment...

These are new Rene Herse Barlow Pass ELs. I've run them with and without tubes. Jan suggests putting sealant in tubes if you don't want the hassle of setting up tubeless. (On her rims, and with those tires, it is a hassle.)

Based on one data point, I now consider this a failed experiment.
Polaris OBark is offline  
Old 07-31-23, 09:32 AM
  #21  
rosefarts
With a mighty wind
Thread Starter
 
Join Date: May 2015
Posts: 2,806
Liked 1,061 Times in 601 Posts
Originally Posted by CrimsonEclipse
Totally agree. Slime was designed for slow moving vehicles.
But on a commuting bike, they were worthless. (I have the same opinion on basic tire liners)
(note: I haven't tried the Tanis super liners or whatever they are called)
If you are an adult and biking for a living or biking remotely, good tires. Even on a Burley trailer.

Kids' bike: Yeah, I get it. $100 of quality tires on a $50 kid's bike is probably overkill.

Been stranded by Slime, not by a good tire.
Worthless as in couldn’t keep you on the road and were giving you maintenance headaches?

Or worthless because the tires ride like a rock and accelerate like a sloth on Xanax?

If it’s the second, I don’t really notice since the bike is 70ish lbs, carrying 70-90lbs worth of kids and crap, plus skinny me.

I wouldn’t set up my real bikes this way.
rosefarts is offline  
Old 07-31-23, 07:06 PM
  #22  
CrimsonEclipse
Senior Member
 
Join Date: Dec 2004
Posts: 1,396
Liked 1,016 Times in 614 Posts
Originally Posted by rosefarts
Worthless as in couldn’t keep you on the road and were giving you maintenance headaches?

Or worthless because the tires ride like a rock and accelerate like a sloth on Xanax?

If it’s the second, I don’t really notice since the bike is 70ish lbs, carrying 70-90lbs worth of kids and crap, plus skinny me.

I wouldn’t set up my real bikes this way.
For me, it never sealed when it needed to and just made the flat more messy, coating my fenders and leaving me stranded anyway.

Same goes for tire liners.

Just go with an armored tire, skip the slime, skip the liners, skip the gimmics.

They've never been worth the effort.
CrimsonEclipse is offline  
Old 07-31-23, 07:38 PM
  #23  
gringomojado
Full Member
 
Join Date: Aug 2014
Posts: 475
Liked 136 Times in 86 Posts
Anybody ever tried it on an auto tire?

gm
gringomojado is offline  
Old 07-31-23, 07:55 PM
  #24  
rsbob 
Grupetto Bob
 
rsbob's Avatar
 
Join Date: Sep 2020
Location: Seattle-ish
Posts: 7,148

Bikes: Bikey McBike Face

Liked 6,902 Times in 3,461 Posts
Originally Posted by urbanknight
I definitely find it amusing and ironic that I used to curse and swear under my breath every time a customer had me install slime in their tubes, yet here I am today squirting goo into all of my tires and happily keeping a shop towel nearby to clean up the inevitable spillage.

Edit: Still better than those tire liners!
Yeah, were Mr Tuffys a scam? I tried them for several years and repaired many a tire on the road with Tuffys. Not to mention adding a bit of weight X2.
__________________
Road 🚴🏾‍♂️ & Mountain 🚵🏾‍♂️







rsbob is offline  
Likes For rsbob:
Old 07-31-23, 08:03 PM
  #25  
urbanknight
Over the hill
 
urbanknight's Avatar
 
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,431

Bikes: Giant Defy, Giant Revolt

Liked 1,265 Times in 718 Posts
Originally Posted by rsbob
Yeah, were Mr Tuffys a scam? I tried them for several years and repaired many a tire on the road with Tuffys. Not to mention adding a bit of weight X2.
The trick was getting them to stay in place (beneath the tread of the tire) long enough to inflate the tube to hold it there. There was always a part (or parts) that slipped to the side, and those unprotected sections of the tire eventually found a thorn. I never used them (or slime) myself, but worked in a shop and got to hear the customers complain when their investment didn't protect them.
__________________
It's like riding a bicycle
urbanknight is online now  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.