Specialized Expedition
#26
Senior Member
[MENTION=302603]bikemig[/MENTION] Actually it was mentioned in post #4. All the more reason.
Post 14 not 4.
Never mind.
Post 14 not 4.
Never mind.
Last edited by Hobbiano; 10-02-23 at 05:40 PM. Reason: Never mind.
Likes For Hobbiano:
#28
I'm really enjoying the gearing changes I made... IRD 7 speed freewheel 13-32, 26 t small ring, and 36t middle ring. With the stock gearing, I felt like I didn't have a low enough first gear for some of the hills (yes, I could ride them, but wished for an easier gear). I also felt like the jump from the middle to large ring was so small that it was more like shifting a gear or two in the back than a front ring change.
Now, I can power up most of the hills I ride in the middle ring, and have a bail out option if needed.
Now, I can power up most of the hills I ride in the middle ring, and have a bail out option if needed.
#29
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,502
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Liked 6,807 Times
in
3,891 Posts
I'm really enjoying the gearing changes I made... IRD 7 speed freewheel 13-32, 26 t small ring, and 36t middle ring. With the stock gearing, I felt like I didn't have a low enough first gear for some of the hills (yes, I could ride them, but wished for an easier gear). I also felt like the jump from the middle to large ring was so small that it was more like shifting a gear or two in the back than a front ring change.
Now, I can power up most of the hills I ride in the middle ring, and have a bail out option if needed.
Now, I can power up most of the hills I ride in the middle ring, and have a bail out option if needed.
If I can keep the vibe and relevance all the better but I will go straight outside the box in a heartbeat if it gets me up the hills better.
Here's a recent interesting scenario. The big silver Merz daily driver was converted to analog for Eroica, plain brake levers and SunTour barcons replaced the Campy 9 speed levers.
Its going to stay this way as it shifts better with the barcons and is easier to trim on the fly with them.
#30
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,763
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Liked 1,789 Times
in
986 Posts
I'm really enjoying the gearing changes I made... IRD 7 speed freewheel 13-32, 26 t small ring, and 36t middle ring. With the stock gearing, I felt like I didn't have a low enough first gear for some of the hills (yes, I could ride them, but wished for an easier gear). I also felt like the jump from the middle to large ring was so small that it was more like shifting a gear or two in the back than a front ring change.
Now, I can power up most of the hills I ride in the middle ring, and have a bail out option if needed.
Now, I can power up most of the hills I ride in the middle ring, and have a bail out option if needed.
It was originally conceived for a 5 gear rear end, so that the difference between a shift in the big and middle ring was effectively a step between each gear in the back. I vaguely understand the concept- but for the most part I just rode in whatever ring I was in, and if it was a touch too hard or too easy, I could back off or move up a half step.
But, like you, I prefer to use the middle ring as a much more usable gearing solution throughout a much fuller range.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#31
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,502
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Liked 6,807 Times
in
3,891 Posts
I'm really enjoying the gearing changes I made... IRD 7 speed freewheel 13-32, 26 t small ring, and 36t middle ring. With the stock gearing, I felt like I didn't have a low enough first gear for some of the hills (yes, I could ride them, but wished for an easier gear). I also felt like the jump from the middle to large ring was so small that it was more like shifting a gear or two in the back than a front ring change.
Now, I can power up most of the hills I ride in the middle ring, and have a bail out option if needed.
Now, I can power up most of the hills I ride in the middle ring, and have a bail out option if needed.
And it should make for interesting conversation if anybody notices whats going on here.
This setup gets me up most hills but I am finding I could use more help more and more.
The barcons did help as I seem to be able to shift into the gear that actually helps better.
Likes For merziac:
#32
Senior Member
Congratulations hooperja on the Expedition.
They are terrific bikes and capable tourers.
I speak from experience as I also had a 1983 model in the 60cm size.
I changed up every part and had a few extra braze ons added in preparation for a couple of bike tours.
I used a XT triple crank and 34 big cog cassette to get me up the mountain passes.
The 22T granny on that crank was the only way I made up up some of the steep climbs in the Rockies and Sierras .
700 some odd miles each time on two different tours in 2008 and 2009 proved it's capability to me.
I was loaded heavy with about 65 pounds of too much gear but the Expedition did not miss a beat.
I wish I could get that bike back.
I hope yours brings you much riding joy and many great memories.
I know mine did.
I could probably dig out a pic if I searched but mine did not have decals as I had the thing nickel plated and never got around to decals.
They are terrific bikes and capable tourers.
I speak from experience as I also had a 1983 model in the 60cm size.
I changed up every part and had a few extra braze ons added in preparation for a couple of bike tours.
I used a XT triple crank and 34 big cog cassette to get me up the mountain passes.
The 22T granny on that crank was the only way I made up up some of the steep climbs in the Rockies and Sierras .
700 some odd miles each time on two different tours in 2008 and 2009 proved it's capability to me.
I was loaded heavy with about 65 pounds of too much gear but the Expedition did not miss a beat.
I wish I could get that bike back.
I hope yours brings you much riding joy and many great memories.
I know mine did.
I could probably dig out a pic if I searched but mine did not have decals as I had the thing nickel plated and never got around to decals.
Last edited by cooperryder; 10-23-23 at 03:42 PM.
#33
Newbie
Join Date: Oct 2017
Location: Arizona
Posts: 45
Bikes: Centurion Pro Tour ('81), Specialized Stumpjumper ('82), Raleigh Portage ('84), Specialized Expedition ('85), Specialized Allez SE ('85), Miyata Ridge Runner SE ('85.5), Fuso ('86), Novara X-R ('87), Peugeot Chorus ('88), Moots Mooto X YBB ('11)
Liked 27 Times
in
17 Posts
The expedition was made 1983, 1984, 1985. Some frame differences: '83 had clamp-on DT shifters, no "S" logo on fork crown. '84 has braze-on DT shifters, but no "S" logo on fork crown; '85 has braze-on DT shifters and "S" logo on fork crown.
I've got a 1985 Expedition - I bought it from original owner several years ago. It's my favorite all-round bike. Original owner swapped out some original parts way back when to 105 index shifters, XT rear derailleur. I changed out the handlebar for a nice Nitto rando bar. Toured on it in eastern Oregon several years ago. Typically have Panaracer Pasela PT 700x35 on it, but lately I'm using some 700x33 cross tires on it.
Also I've got a 60cm 1983 Expedition in amazing condition, nearly all original (including Jim Blackburn front/rear racks, Avocet Touring I saddle, a vintage Silca pump, and even a Sanyo generator and lights). The bike was ridden very low miles. I just overhauled it and put on new cables, tires/tubes, pedal straps, brake hoods and handlebar tape. I'll be taking photos of it tomorrow and listing it for sale here on BF and also in a few other places. To whet your appetite here's the "before" bike as I purchased it (drive side!)
I've got a 1985 Expedition - I bought it from original owner several years ago. It's my favorite all-round bike. Original owner swapped out some original parts way back when to 105 index shifters, XT rear derailleur. I changed out the handlebar for a nice Nitto rando bar. Toured on it in eastern Oregon several years ago. Typically have Panaracer Pasela PT 700x35 on it, but lately I'm using some 700x33 cross tires on it.
Also I've got a 60cm 1983 Expedition in amazing condition, nearly all original (including Jim Blackburn front/rear racks, Avocet Touring I saddle, a vintage Silca pump, and even a Sanyo generator and lights). The bike was ridden very low miles. I just overhauled it and put on new cables, tires/tubes, pedal straps, brake hoods and handlebar tape. I'll be taking photos of it tomorrow and listing it for sale here on BF and also in a few other places. To whet your appetite here's the "before" bike as I purchased it (drive side!)
Likes For Iowhat:
#34
Iowhat, how do we know the Expedition wasn't made in '86? You seem to have a lot of info, so I'm wondering how you came to that conclusion. Something definitive would be nice and I'll correct one of my earlier posts.
I appreciate the difference noted between '84 and '85. I've seen catalogue scans of both years, but of course, these differences aren't specified.
I appreciate the difference noted between '84 and '85. I've seen catalogue scans of both years, but of course, these differences aren't specified.
#35
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,763
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Liked 1,789 Times
in
986 Posts
I don't know either way- but, historically, it seemed the bottom dropped out of the touring market- being supplanted by ATBs and MTBs. Trek didn't have a tourer in 1986 (with the exception of the 620 Cirrus- which was just leftover 85 620s with different paint and graphics, and wasn't in a catalog), and in fact, most of all the 1985 Trek 720s were built in 1984... meaning they didn't sell a whole lot in 84/85. Additionally, Schwinn discontinued the Voyageur SP after 1985 and just continued with the Voyageur. So it really wouldn't surprise me that an expensive bike like the Expedition would have been discontinued in that environment.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Likes For The Golden Boy:
#36
Newbie
Join Date: Oct 2017
Location: Arizona
Posts: 45
Bikes: Centurion Pro Tour ('81), Specialized Stumpjumper ('82), Raleigh Portage ('84), Specialized Expedition ('85), Specialized Allez SE ('85), Miyata Ridge Runner SE ('85.5), Fuso ('86), Novara X-R ('87), Peugeot Chorus ('88), Moots Mooto X YBB ('11)
Liked 27 Times
in
17 Posts
Well, I don't know 100% for certain, but just have not ever seen an Expedition frame with a 1986 serial number.
My 1985 Expedition has a frame that was produced in 1984 (serial # starts with "M") and the 1983 Expedition I'll be selling has a frame produced in 1983 (serial # starts with "L").
Until we find that 1986 catalog scan or someone chimes in with definitive proof I guess we'll have to leave things as "tentative".
My 1985 Expedition has a frame that was produced in 1984 (serial # starts with "M") and the 1983 Expedition I'll be selling has a frame produced in 1983 (serial # starts with "L").
Until we find that 1986 catalog scan or someone chimes in with definitive proof I guess we'll have to leave things as "tentative".
Likes For Iowhat:
#37
Newbie
Join Date: Oct 2017
Location: Arizona
Posts: 45
Bikes: Centurion Pro Tour ('81), Specialized Stumpjumper ('82), Raleigh Portage ('84), Specialized Expedition ('85), Specialized Allez SE ('85), Miyata Ridge Runner SE ('85.5), Fuso ('86), Novara X-R ('87), Peugeot Chorus ('88), Moots Mooto X YBB ('11)
Liked 27 Times
in
17 Posts
I just posted my 1983 Specialized Expedition (60cm) in the Marketplace "For Sale". Here's the finished bike (ready for you!)
Likes For Iowhat:
#38
Senior Member
You may want to post it in the classic & vintage sales section, it’ll get more traction that way.
#39
Senior Member
Join Date: Jul 2022
Location: Pac NW
Posts: 2,393
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Liked 2,277 Times
in
828 Posts
Just posted one for sale
https://www.bikeforums.net/classic-v...size-54-a.html
https://www.bikeforums.net/classic-v...size-54-a.html
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
#41
Senior Member
Join Date: Jul 2022
Location: Pac NW
Posts: 2,393
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Liked 2,277 Times
in
828 Posts
Must be a regional thing. Until 2 weeks ago I have never noticed the Expedition before. Since then, the co-op has received 2.
And on my pub crawl last night, saw another two along the bike path, plus another outside the gallery for the 24 hours of playing Louis-Louis.
I'm part of an ad-hoc band. Kazoo and Jew's Harp.
Some local shop must have seen their design genius and ordered tonnes.
And on my pub crawl last night, saw another two along the bike path, plus another outside the gallery for the 24 hours of playing Louis-Louis.
I'm part of an ad-hoc band. Kazoo and Jew's Harp.
Some local shop must have seen their design genius and ordered tonnes.
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
#42
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,502
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Liked 6,807 Times
in
3,891 Posts
I was passed on the 205 path by one going the other way.
#43
I need to start getting in the habit again so I plan on cheating; instead of attempting to commute the 43 miles from home and back I'll pick a point probably 10 miles out. Drive there, switch to the bike, then 'commute' back to the car. Not as soul inspiring as commuting all the way but at least I can put miles under the tires.
Likes For abdon:
#44
I need to start getting in the habit again so I plan on cheating; instead of attempting to commute the 43 miles from home and back I'll pick a point probably 10 miles out. Drive there, switch to the bike, then 'commute' back to the car. Not as soul inspiring as commuting all the way but at least I can put miles under the tires.
Likes For hopperja:
#45
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,502
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Liked 6,807 Times
in
3,891 Posts
This is often how I get back out the next day from not blowing out the day before and so on.
I can cover a lot more ground if I use other resources and do.
#46
I own one in 58, honestly, the Specialized Expedition is what a modern Surly Disc Trucker wished it was. The SE is as sturdy as the Trucker but also like a racing bike, so it's fast AND well built. Absolutely phenomenal to ride.
I cannot understand why Surly didn't just copy the SE's geometry. It might have come out better than what they had.
I cannot understand why Surly didn't just copy the SE's geometry. It might have come out better than what they had.
#47
Newbie
Join Date: Oct 2017
Location: Arizona
Posts: 45
Bikes: Centurion Pro Tour ('81), Specialized Stumpjumper ('82), Raleigh Portage ('84), Specialized Expedition ('85), Specialized Allez SE ('85), Miyata Ridge Runner SE ('85.5), Fuso ('86), Novara X-R ('87), Peugeot Chorus ('88), Moots Mooto X YBB ('11)
Liked 27 Times
in
17 Posts
I love my '85 Expedition....this morning I did a 45 mile ride, comfy with a front bag (vintage Cannondale bag) and averaged about 15 mph with 700x35 tires. I've toured on it, scrambled on gravel forest roads, and just ride it where/whenever.
Likes For Iowhat:
#48
The best bikes for touring that were made in the 1980's were the ones targeting triathletes. After the long swim for the first event the riders wanted a stable bike that was easy to control and so the bikes had less severe head tube angles and more fork rake. A good example is the Centurion Dave Scott Ironman bike that I owned until a few years ago. Only downside for me is that it used downtube gear shift levers. It was very stable at speeds over 50 mph on pavement. But for it having 10 speeds and no brifter gear/brake levers, it is as good as any bike made today. At the current time I would look at what are termed "endurance" bikes.
#49
The best bikes for touring that were made in the 1980's were the ones targeting triathletes. After the long swim for the first event the riders wanted a stable bike that was easy to control and so the bikes had less severe head tube angles and more fork rake. A good example is the Centurion Dave Scott Ironman bike that I owned until a few years ago. Only downside for me is that it used downtube gear shift levers. It was very stable at speeds over 50 mph on pavement. But for it having 10 speeds and no brifter gear/brake levers, it is as good as any bike made today. At the current time I would look at what are termed "endurance" bikes.
Last edited by abdon; 10-16-23 at 03:48 PM.
#50
Senior Member
The best bikes for touring that were made in the 1980's were the ones targeting triathletes. After the long swim for the first event the riders wanted a stable bike that was easy to control and so the bikes had less severe head tube angles and more fork rake. A good example is the Centurion Dave Scott Ironman bike that I owned until a few years ago. Only downside for me is that it used downtube gear shift levers. It was very stable at speeds over 50 mph on pavement. But for it having 10 speeds and no brifter gear/brake levers, it is as good as any bike made today. At the current time I would look at what are termed "endurance" bikes.