Specialized Expedition
#51
Senior Member
Join Date: Mar 2015
Location: New Zealand
Posts: 1,058
Bikes: Gunnar, Shogun, Concorde, F Moser, Pete Tansley, Rocky Mtn, Diamant, Krapf, Marin, Avanti, Winora, Emmelle, Ken Evans
Liked 419 Times
in
219 Posts
Gearing can always be lower for a touring setup.
#52
Senior Member
Join Date: Mar 2015
Location: New Zealand
Posts: 1,058
Bikes: Gunnar, Shogun, Concorde, F Moser, Pete Tansley, Rocky Mtn, Diamant, Krapf, Marin, Avanti, Winora, Emmelle, Ken Evans
Liked 419 Times
in
219 Posts
This is a fantastic bike.
To me it's setup as an excellent commuter, and if you're serious about touring on it, could have better performance.
For touring, i would prefer more powerful brake levers (any basic aero routing shimano ones are fine), $$ tires as wide as will fit, lose the fenders, and a cassette wheel with a 34, 36 or wider big cog.
The pink hoods, black tape, and handlebar mirrors combination is truely hideous. As are your plastic bottle cages.
To me it's setup as an excellent commuter, and if you're serious about touring on it, could have better performance.
For touring, i would prefer more powerful brake levers (any basic aero routing shimano ones are fine), $$ tires as wide as will fit, lose the fenders, and a cassette wheel with a 34, 36 or wider big cog.
The pink hoods, black tape, and handlebar mirrors combination is truely hideous. As are your plastic bottle cages.
#53
Likes For hopperja:
#54
Rode the Foothills Trail today. 31 miles, 2 hours. This was near Buckley, WA. That's a Vincita trunk bag I got for my Brompton. I really like it for day rides on the Expedition too.
Likes For hopperja:
#55
I watched a video on YT about servicing the rear derailleur where the person commented that the upper jockey wheel is the Achilles heel of this particular design. What's the consensus on this derailleur? I have no experience with a Suntour Mountech other than on this bike. Is it reliable enough to keep in service, or replace it?
I have a ~1990 Deore LX long cage I could replace it with.
I have a ~1990 Deore LX long cage I could replace it with.
#56
I would not buy a bike without the combo brake/shift levers for general riding much less for touring with a load. Since buying my first bike with this feature I quickly found I was shifting more often and being in the optimum gear for a given situation. Much easier to maintain my cadence and speed, especially in hilly terrain.
The 1980's triathalon bikes were very good for touring with their relaxed geometry. I owned the Centurion Dave Scott bike and it was very stable even at speed. Current triathalon bikes are not as good but fortunately "endurance" bikes are available with a similar geometry with the Specialized Roubaix bike being a good example.
The 1980's triathalon bikes were very good for touring with their relaxed geometry. I owned the Centurion Dave Scott bike and it was very stable even at speed. Current triathalon bikes are not as good but fortunately "endurance" bikes are available with a similar geometry with the Specialized Roubaix bike being a good example.
#57
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,763
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Liked 1,789 Times
in
986 Posts
I watched a video on YT about servicing the rear derailleur where the person commented that the upper jockey wheel is the Achilles heel of this particular design. What's the consensus on this derailleur? I have no experience with a Suntour Mountech other than on this bike. Is it reliable enough to keep in service, or replace it?
I have a ~1990 Deore LX long cage I could replace it with.
I have a ~1990 Deore LX long cage I could replace it with.
https://www.disraeligears.co.uk/site...of_duopar.html
There are a few different versions of the Mountech- none of which are particularly "good." The Mountech front derailleur is one of the very best front derailleurs ever made; the first version of the Mountech rear derailleur with the captive pulley is one of the very worst rear derailleurs ever made. As for why it's so bad, the primary thing is that it's difficult to access and maintain the upper pulley and then it gets fouled and it seizes and it throws the derailleur into the spokes. Additionally, the Mountech not only has 3 pivots- each of which can wear or go out of adjustment- but the cage is really long- meaning it doesn't take much to damage it- a smaller hit on the cage has more leverage to bend or push the pivots (or any part) out of alignment.
I have a 1984 Stumpjumper Sport- The original owner used it as a commuter, not so much an off road bike. It's interesting because everything- except the pedals and the grips was stock on the bike- but the rear derailleur and rear wheel were replaced with units from around 1993. It's that real-life example of what happens- the derailleur seizes and gets thrown into the spokes, tearing up the derailleur, wheel and possibly dropout.
There's things that have bad reputations that you can just be obstinate about and just use. It seems there's people that use their Mountechs in the face of every bit of historical probability that it'll happen... and even people that it happens to that go out of their way to repair the obscenely complicated pulley system. IMO- there's HUNDREDS of really cool, bulletproof, ultra reliable derailleurs that would be "right" on that bike- there's zero reason to keep that Mountech on there.
The circa 1990 LX unit would be fine- Personally I'd look for a circa 1985 Suntour XC (just plain "XC" all silver with black screening on)- IMO- that's the most modern of the friction Suntour derailleurs. Triple pulley XC would be bonus points
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Last edited by The Golden Boy; 10-24-23 at 11:31 AM.
Likes For The Golden Boy:
#58
Mountech was not all that terrible (only somewhat terrible). The biggest issue was that it did not like to crunch gravel. On a dirt bike grinding dirt day in and day out it was not a happy camper and was prone not to live a long fruitful life. What made it only somewhat terrible was the fact that the overcomplicated mechanism could not be serviced with common tools.
having said that I have no issues running them on touring bikes that are not grinding gravel on a daily basis. On that environment they are quite reliable and with plenty of chain capacity.
having said that I have no issues running them on touring bikes that are not grinding gravel on a daily basis. On that environment they are quite reliable and with plenty of chain capacity.
Likes For abdon:
#59
Thanks for the info on the Mountech. The link provided by The Golden Boy was a very interesting read. I had no idea. The
video on the maintenance was very critical, which is why I asked the question to begin with.
This bike is new to me, I really like it, and have dreams of long rides for years to come. I took it off and installed the Deore LX (RD 550, made 1990-1992). I fiddled a little with the Mountech and found the upper pulley mostly smooth, but caught a little at one point while rotating it, which means it definitely needed some love. For now, I'll run the LX.
And for Merziac, nearly every day I search CL for a Merz. I don't expect one will come up any time soon.
This bike is new to me, I really like it, and have dreams of long rides for years to come. I took it off and installed the Deore LX (RD 550, made 1990-1992). I fiddled a little with the Mountech and found the upper pulley mostly smooth, but caught a little at one point while rotating it, which means it definitely needed some love. For now, I'll run the LX.
And for Merziac, nearly every day I search CL for a Merz. I don't expect one will come up any time soon.
Last edited by hopperja; 10-24-23 at 08:44 PM.
Likes For hopperja:
Likes For hopperja:
#61
Basic derailleur maintenance should not require much at all. The alluded complexity comes from the delicate (for dirt biking) spring mechanism that if it got cruded and broke you could not easily get to it. Take out the wheels, clean and lube, and you should be good to go.
I have that derailleur in two bikes, I don't worry about them failing.
I have that derailleur in two bikes, I don't worry about them failing.
Likes For abdon:
#62
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,502
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Liked 6,806 Times
in
3,890 Posts
Thanks for the info on the Mountech. The link provided by The Golden Boy was a very interesting read. I had no idea. The video I watched video on the maintenance was very critical, which is why I asked the question to begin with.
This bike is new to me, I really like it, and have dreams of long rides for years to come. I took it off and installed the Deore LX (RD 550, made 1990-1992). I fiddled a little with the Mountech and found the upper pulley mostly smooth, but caught a little at one point while rotating it, which means it definitely needed some love. For now, I'll run the LX.
And for Merziac, nearly every day I search CL for a Merz. I don't expect one will come up any time soon.
This bike is new to me, I really like it, and have dreams of long rides for years to come. I took it off and installed the Deore LX (RD 550, made 1990-1992). I fiddled a little with the Mountech and found the upper pulley mostly smooth, but caught a little at one point while rotating it, which means it definitely needed some love. For now, I'll run the LX.
And for Merziac, nearly every day I search CL for a Merz. I don't expect one will come up any time soon.
Finding one your size and getting your hands on it are very challenging.
And you do already have a very Merz DNA adjacent bike to hold you over.
Your CL search needs to be nationwide, efbay also and you need to be ready and able to pounce without any hesitation.
Likes For hopperja:
#64
Senior Member
…but most people touring aren’t doing so after long swims and also need to carry 40+ lbs of gear. No doubt those were stable bikes, but loaded with gear over many miles and up hills? Seems like they’d fall short in a lot of ways compared to an Expedition, 720, Voyageur etc.
Likes For polymorphself:
#65
They would work somewhat fine for light touring and credit card touring. True workhorses (This Expedition, Miyata 1000/Specialissima, Trek 720) are built so the frame is dialed to perform under a heavy load.
Heck the Specialized Sequoia and Expedition bikes; both built the same year, both are designed for touring, and yet the Sequoia was built with their "Special Series Racing double butted" (same as the ones used in their regular road bikes) and the Expedition uses "Special Series Touring double butted". I don't know what secret sauce is on their tubbing (they didn't make it, they just rebranded it for marketing purposes) but the touring version is just built for heavy loaded touring and perform at its best when you are packing a lot of weight.
Heck the Specialized Sequoia and Expedition bikes; both built the same year, both are designed for touring, and yet the Sequoia was built with their "Special Series Racing double butted" (same as the ones used in their regular road bikes) and the Expedition uses "Special Series Touring double butted". I don't know what secret sauce is on their tubbing (they didn't make it, they just rebranded it for marketing purposes) but the touring version is just built for heavy loaded touring and perform at its best when you are packing a lot of weight.
#66
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,502
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Liked 6,806 Times
in
3,890 Posts
They would work somewhat fine for light touring and credit card touring. True workhorses (This Expedition, Miyata 1000/Specialissima, Trek 720) are built so the frame is dialed to perform under a heavy load.
Heck the Specialized Sequoia and Expedition bikes; both built the same year, both are designed for touring, and yet the Sequoia was built with their "Special Series Racing double butted" (same as the ones used in their regular road bikes) and the Expedition uses "Special Series Touring double butted". I don't know what secret sauce is on their tubbing (they didn't make it, they just rebranded it for marketing purposes) but the touring version is just built for heavy loaded touring and perform at its best when you are packing a lot of weight.
Heck the Specialized Sequoia and Expedition bikes; both built the same year, both are designed for touring, and yet the Sequoia was built with their "Special Series Racing double butted" (same as the ones used in their regular road bikes) and the Expedition uses "Special Series Touring double butted". I don't know what secret sauce is on their tubbing (they didn't make it, they just rebranded it for marketing purposes) but the touring version is just built for heavy loaded touring and perform at its best when you are packing a lot of weight.
Innovate or die evokes a lot of passion and talent from those that already have it in spades.
#67
I took 2 - 5 gallon buckets of glass to the recycle center (no curbside pickup where I am). I managed to turn it into a 22 mile ride, which was nice.
About the rear derailleur : on my last ride, I had a catastrophic failure of the old LX, so I replaced it with another I had laying around. Here's a picture on the way back:
About the rear derailleur : on my last ride, I had a catastrophic failure of the old LX, so I replaced it with another I had laying around. Here's a picture on the way back:
Likes For hopperja:
#68
Junior Member
Ahah....
I can't tell if you know this- but the two relatively close big rings and the bail out gearing is referred to as "half-step and a granny."
It was originally conceived for a 5 gear rear end, so that the difference between a shift in the big and middle ring was effectively a step between each gear in the back.
It was originally conceived for a 5 gear rear end, so that the difference between a shift in the big and middle ring was effectively a step between each gear in the back.
Likes For montclairbobbyb:
#69
I can't tell if you know this- but the two relatively close big rings and the bail out gearing is referred to as "half-step and a granny."
It was originally conceived for a 5 gear rear end, so that the difference between a shift in the big and middle ring was effectively a step between each gear in the back. I vaguely understand the concept- but for the most part I just rode in whatever ring I was in, and if it was a touch too hard or too easy, I could back off or move up a half step.
But, like you, I prefer to use the middle ring as a much more usable gearing solution throughout a much fuller range.
It was originally conceived for a 5 gear rear end, so that the difference between a shift in the big and middle ring was effectively a step between each gear in the back. I vaguely understand the concept- but for the most part I just rode in whatever ring I was in, and if it was a touch too hard or too easy, I could back off or move up a half step.
But, like you, I prefer to use the middle ring as a much more usable gearing solution throughout a much fuller range.
Likes For hopperja:
#70
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,502
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Liked 6,806 Times
in
3,890 Posts
I took 2 - 5 gallon buckets of glass to the recycle center (no curbside pickup where I am). I managed to turn it into a 22 mile ride, which was nice.
About the rear derailleur : on my last ride, I had a catastrophic failure of the old LX, so I replaced it with another I had laying around. Here's a picture on the way back:
About the rear derailleur : on my last ride, I had a catastrophic failure of the old LX, so I replaced it with another I had laying around. Here's a picture on the way back:
#71
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,763
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Liked 1,789 Times
in
986 Posts
I just re-read this. Very interesting. I knew the name "half-step and a granny" but didn't know the reasoning behind it. So, to use it as it was conceived, you'd be shifting the FD as often as the RD, to take advantage of each half step. It seems to me this would work better in theory than practice.
Start- shift to big ring, shift to small ring and up one in back. Shift to big ring. Shift to middle and one in back. Shift to big ring.
Theoretically- There’s gear charts with ring and gear progressions/patterns mapped out. Again- that’s way too much thinking for me.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#72
Senior Member
I agree, too much thinking and finessing for a triple.
But! I want to try on a 126mm 7 speed freehub with a '9 of 10 on 7' cassette setup. I think it would be dead simple and actually pretty nice to use. Since there's only two places for the front derailleur to be you can slam it up or down w/o much thought. And then since the spacing is only 126mm cross chaining is kept to a minimum while gaining access to 9 cogs.
Another sweet benefit to this setup would be that you could probably use 144 BCD cranks (which seem to often have the best designs from the old days) and still have a wide range with even, small steps between.
But! I want to try on a 126mm 7 speed freehub with a '9 of 10 on 7' cassette setup. I think it would be dead simple and actually pretty nice to use. Since there's only two places for the front derailleur to be you can slam it up or down w/o much thought. And then since the spacing is only 126mm cross chaining is kept to a minimum while gaining access to 9 cogs.
Another sweet benefit to this setup would be that you could probably use 144 BCD cranks (which seem to often have the best designs from the old days) and still have a wide range with even, small steps between.
#73
Newbie
My Bike Forums account doesn't have enough posts yet to allow outside URL links, but if you search for "Specialized Expedition Touring Bike, 54cm-Vintage" you should be able to find it. Located in Lyme, New Hampshire.
Last edited by JustAnEngineer; 12-30-23 at 02:53 PM.
Likes For JustAnEngineer:
#74
Senior Member
Join Date: Oct 2008
Location: Right where I'm supposed to be
Posts: 1,702
Bikes: Franklin Frames Custom, Rivendell Bombadil
Liked 241 Times
in
149 Posts
I had the Mountech as stock on my '83 Stumpjumper Sport and it ended up failing fairly quickly as I recall. All I remember really is going to a shop for a replacement, a Shimano Sport LX rear. It's kind of an oddball, just made a few years as I recall. I'm pretty sure it's not related to Deore LX at all. Neverthless, it's been flawless and I still ride it today on my road bike as I sold the Stumpie frame long ago.
Half Step gearing doesn't require one to keep shifting from ring to ring for every cog chain in a certain pattern. I ran a 26/44/48 and a 7sp 13-32 FW. I would ride either ring and rear shift most of the time, only changing rings as I needed or desired as a fine tuning. It was no different than that way than a say 26/36/46, it's just the 2 big rings were closer together, offering more fine tuning of the gear. I never thought I had to follow some mathematical pattern. Ride and shift as needed, not complicated ! I still ride the same Sachs 13-32 FW's today, 13/15/17/20/24/28/32 and those lend themselves to nice tweener gears. I think the only reason why I didn't continue with it was I wore out the 44t and changed the crank and it came with 26/36/46 rings. For a yet to adorn new classic steel frame I just may go to HS+G again. If you have to ask why, you miss the point, why do anything ? For the joy of it The specifics themselves are only the means to the expression of it.
Half Step gearing doesn't require one to keep shifting from ring to ring for every cog chain in a certain pattern. I ran a 26/44/48 and a 7sp 13-32 FW. I would ride either ring and rear shift most of the time, only changing rings as I needed or desired as a fine tuning. It was no different than that way than a say 26/36/46, it's just the 2 big rings were closer together, offering more fine tuning of the gear. I never thought I had to follow some mathematical pattern. Ride and shift as needed, not complicated ! I still ride the same Sachs 13-32 FW's today, 13/15/17/20/24/28/32 and those lend themselves to nice tweener gears. I think the only reason why I didn't continue with it was I wore out the 44t and changed the crank and it came with 26/36/46 rings. For a yet to adorn new classic steel frame I just may go to HS+G again. If you have to ask why, you miss the point, why do anything ? For the joy of it The specifics themselves are only the means to the expression of it.
Likes For Garthr:
#75
Rode to the hardware and grocery stores today. 38°f and raining.
Had a flat on the way home. Broke out the spare tube and Tiakia pump I got for less than $20 on Amazon. It worked surprisingly well. The pumping motion is a little like a shake weight. When my right hand got tired, I switched to my left. Practice makes perfect!
Had a flat on the way home. Broke out the spare tube and Tiakia pump I got for less than $20 on Amazon. It worked surprisingly well. The pumping motion is a little like a shake weight. When my right hand got tired, I switched to my left. Practice makes perfect!
Likes For hopperja: