Dura Ace shifting setup...
#1
Senior Member
Thread Starter
Join Date: Feb 2012
Location: Williamsburg, VA Sebastian, FL
Posts: 1,364
Bikes: 1987 Centurion Ironman Master, 1992 Koga Miyata Exerciser, 1992 Schwinn Crosscut
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 210 Post(s)
Likes: 0
Liked 175 Times
in
92 Posts
Dura Ace shifting setup...
Will these Dura Ace components get along with each other?
7402 rear derailleur
SL-BS77 bar end shifters
8-cog Hyperglide freehub
7402 rear derailleur
SL-BS77 bar end shifters
8-cog Hyperglide freehub
#2
Senior Member
You can try it with a normal setup method, extra click on the innermost sprocket end, restricted by the L limit screw on the RD.
If you have problems getting into the innermost sprocket, you can try it with the extra click on the outermost (H) end. The amount of cable pull between 'clicks' are not exactly the same in all positions. Again set the RD limit with the screw. If you do happen to go into the 'high' position on the shifter, the cable will go slack.
#3
Senior Member
Join Date: Apr 2011
Posts: 7,357
Mentioned: 43 Post(s)
Tagged: 0 Thread(s)
Quoted: 4590 Post(s)
Liked 1,741 Times
in
1,139 Posts
That combination is actually Shimano replacement spec - 9 speed shifters shift 8 speed 7400 series perfectly. Use the first 8 clicks. The low limit will prevent you from getting to the extra click on the low end.
Likes For Kontact:
#4
Senior Member
Thread Starter
Join Date: Feb 2012
Location: Williamsburg, VA Sebastian, FL
Posts: 1,364
Bikes: 1987 Centurion Ironman Master, 1992 Koga Miyata Exerciser, 1992 Schwinn Crosscut
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 210 Post(s)
Likes: 0
Liked 175 Times
in
92 Posts
Awesome...thank you!
I have the DA brifters, but love bar ends...so that's the path I'm taking.
Now, all I need is a set of levers and a pair of bar ends!
I have the DA brifters, but love bar ends...so that's the path I'm taking.
Now, all I need is a set of levers and a pair of bar ends!