Brake Hoods Tilted Inward... Have You Tried It?
#51
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,867
Bikes: RSO E-tire dropper fixie brifter
Liked 3,302 Times
in
2,096 Posts
the aggressive tilt reminds me of when a bicycle takes a tumble & after picking out the dirt, the levers are pointing in like such in a way. Some tilt is nice.
__________________
-YMMV
-YMMV
Likes For Troul:
#52
This wrench fits...
Yes to the inward rotation! I've been out dialing my 48cm Noodles with Tiagra levers, and my hands were "telling"me they wanted the levers rotated inwards. Somewhere between 5 and 10 degrees, feels right. I'll rarely be in the hooks or on the drops, and have interrupters for when on the flats, so this is primarily for braking on the hoodz. Inward just feels better.
#53
Senior Member
Join Date: Jan 2013
Posts: 2,830
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Liked 676 Times
in
463 Posts
Thanks all. I ignored this thread until when raising bars (now in my 70s) and putting bar end shifters on the ends of bullhorn bars for my town bike I never tightened the bar end clamps all the way and found to my surprise they were tilted in at about the angles shown after the first ride. Recalling this thread I tried it on a couple drop bars and the early returns are good.
#54
meow
Join Date: Jan 2008
Location: Hint: check out my BF name
Posts: 5,831
Bikes: 2016 Parlee Altum, 2013 Cannondale Super Six Evo Hi Mod Di2 only, 2011 Cannondale Super Six, Dura Ace 7800, 2007 Cannondale System Six Dura Ace 7800, 1992 Bridgestone RB-1, MB-2, MB-3, MB-5
Liked 3 Times
in
2 Posts
Likes For bostongarden:
#55
Senior Member
Join Date: Aug 2019
Location: Québec, Canada
Posts: 2,201
Bikes: SL8 Pro, TCR beater
Liked 601 Times
in
453 Posts
Inward is definitively more ergonomic, up to a certain point. Now, it was banned (or more like controlled) by the UCI because people were abusing of how tilted inward the levers were to gain a few watts. Some of them were so inward that the brake levers were almost perpendicular to the horns, resulting in a safety hazard.
The majority always pays for the minority - it's a social rule.
The majority always pays for the minority - it's a social rule.
Last edited by eduskator; 04-03-24 at 08:15 AM.
#56
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,867
Bikes: RSO E-tire dropper fixie brifter
Liked 3,302 Times
in
2,096 Posts
Likes For Troul:
#57
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,202
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Liked 1,556 Times
in
862 Posts
I’ve been using slightly inward tilting on traditionally shaped drop bars for a long time, both standard and compact. I now have 2 bikes with Ritchey Beacon flared drop bars. They have very shallow drop, 88mm, and short reach, flare is 36 degrees. The inward angle is pretty extreme and I have found it to be highly comfortable, easy on the wrist and hands, and has almost eliminated my problem with badly arthritic thumbs. With the, there is more surface area and room for the hands. IMO, the levers are also easier to access.
#58
Senior Member
Join Date: Aug 2019
Location: Québec, Canada
Posts: 2,201
Bikes: SL8 Pro, TCR beater
Liked 601 Times
in
453 Posts
I’ve been using slightly inward tilting on traditionally shaped drop bars for a long time, both standard and compact. I now have 2 bikes with Ritchey Beacon flared drop bars. They have very shallow drop, 88mm, and short reach, flare is 36 degrees. The inward angle is pretty extreme and I have found it to be highly comfortable, easy on the wrist and hands, and has almost eliminated my problem with badly arthritic thumbs. With the, there is more surface area and room for the hands. IMO, the levers are also easier to access.
Likes For delbiker1:
#60
I recently had a little spill, and one of the levers now points inward a bit, and the other one is still parallel with the drops. I thought I would leave it that way for awhile, to see which felt more natural.
So far, I cannot tell the difference, and pretty much forgot about it until I saw this thread.
So far, I cannot tell the difference, and pretty much forgot about it until I saw this thread.