Il Gregario - a custom project
#126
Senior Member
#127
Senior Member
Thread Starter
Likes For iab:
Likes For iab:
#129
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,631
Bikes: Indeed!
Liked 3,800 Times
in
1,197 Posts
I'm happy to see this ambitious project still moving forward!
Brent
Brent
__________________
"I have a tendency to meander sometimes." B.G.
"I have a tendency to meander sometimes." B.G.
Likes For obrentharris:
#130
Senior Member
Thread Starter
Likes For iab:
Likes For iab:
#132
Senior Member
Thread Starter
Likes For iab:
#133
Pining for the fjords
Those bars are stylish beyond belief! Sorry, new to this thread, are they 3D printed too?
__________________
#134
Senior Member
Thread Starter
Lugs have a thin wall, about 1.2mm, ideal for printing and almost too thin for machining. The stem has 3mm walls, ideal for machining, and gets pricey to print.
#135
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,561
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Liked 3,590 Times
in
2,254 Posts
I am just astounded by what can be done with printed stuff. But your bars, stem and levers are sublime. Amazing work.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
#136
Senior Member
Upper headlug has a family styling clue to about a 1,000 years ago.
yours is much more sophisticated.
yours is much more sophisticated.
Likes For repechage:
#137
Senior Member
Thread Starter
Parts! Finally pulled the trigger.
Likes For iab:
#138
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,561
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Liked 3,590 Times
in
2,254 Posts
Wow. Those are neat. Were they machined or printed?
And the pedals above. What body did you attach the plates to?
And the pedals above. What body did you attach the plates to?
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
#139
Senior Member
Thread Starter
As for the pedals, I used MKS Touring bodies. I have a wide fat foot. Quills and toe clips are very uncomfortable to me.
#140
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,561
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Liked 3,590 Times
in
2,254 Posts
I don't recall that quote. It was 9 years ago. I did buy a single lug (top head tube) in 2017. It was $312. The box above, 21 parts total, was $445. The BB was the most expensive at $68. Not cheap, but I expect at least 160 hours of finishing. So it cost me $2.78/hour to have fun. Cheaper than a movie.
As for the pedals, I used MKS Touring bodies. I have a wide fat foot. Quills and toe clips are very uncomfortable to me.
As for the pedals, I used MKS Touring bodies. I have a wide fat foot. Quills and toe clips are very uncomfortable to me.
What tubing will you use?
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
#141
Senior Member
Thread Starter
Columbus XCR. Except the fork, Columbus doesn't offer a stainless option. I went with KVA.
#142
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,803
Bikes: It's complicated.
Liked 6,164 Times
in
2,399 Posts
Let the polishing begin!
Looks like one of the fork dropouts is already done...
Have you estimated the height of the pile of sandpaper you'll go through?
Looks like a different printing process from earlier test pieces. I don't see the "sedimentary" printing artifacts, these looke more "cast."
I'm still amazed at the 3D printing state of the art from when I was designing these kind of parts maybe 15 years ago. Costs have dropped significantly as well.
Looks like one of the fork dropouts is already done...
Have you estimated the height of the pile of sandpaper you'll go through?
Looks like a different printing process from earlier test pieces. I don't see the "sedimentary" printing artifacts, these looke more "cast."
I'm still amazed at the 3D printing state of the art from when I was designing these kind of parts maybe 15 years ago. Costs have dropped significantly as well.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#143
Senior Member
Thread Starter
#144
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,803
Bikes: It's complicated.
Liked 6,164 Times
in
2,399 Posts
The Atelier has a large scrap bin for this very reason. As long as I stick to same bend, same material dimensions I'm pretty confident in my rack/decaleur designs. When I'm asked to go outside of my comfort zone, I light a few candles before horking down on tubing.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#145
Once again, sir, you manage to astound those among us who are less creative and experimental.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...