Campy Freehub Interchangeability
#1
Full Member
Thread Starter
Join Date: Mar 2024
Location: San Diego
Posts: 484
Bikes: Columbine, Paramount Track Bike, Colnago Super, Santana Tandems (1995 & 2007), Gary Fisher Piranha, Trek Wahoo, Bianchi Track Bike, a couple of Honda mountain bikes
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 234 Post(s)
Liked 151 Times
in
99 Posts
Campy Freehub Interchangeability
I found a set of Campagnolo wheels with a 9/10/11/12 speed freehub.
Is there a way to change the freehub to a shimano spline format?
I know there is a thread on BF about this, but it is 15 years old.
Also, is there an available reference to Campy standards (maybe starting with freehubs to current stuff) somewhere?
Is there a way to change the freehub to a shimano spline format?
I know there is a thread on BF about this, but it is 15 years old.
Also, is there an available reference to Campy standards (maybe starting with freehubs to current stuff) somewhere?
__________________
Cheers, Mike
Cheers, Mike
Last edited by PromptCritical; 05-17-24 at 11:23 AM.
#2
Full Member
I found a set of Campagnolo wheels with a 9/10/11/12 speed freehub.
Is there a way to change the freehub to a shimano spline format?
I know there is a thread on BF about this, but it is 15 years old.
Also, is there an available reference to Campy standards (maybe starting with freehubs to current stuff) somewhere?
Is there a way to change the freehub to a shimano spline format?
I know there is a thread on BF about this, but it is 15 years old.
Also, is there an available reference to Campy standards (maybe starting with freehubs to current stuff) somewhere?
#3
Full Member
Thread Starter
Join Date: Mar 2024
Location: San Diego
Posts: 484
Bikes: Columbine, Paramount Track Bike, Colnago Super, Santana Tandems (1995 & 2007), Gary Fisher Piranha, Trek Wahoo, Bianchi Track Bike, a couple of Honda mountain bikes
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 234 Post(s)
Liked 151 Times
in
99 Posts
Sometimes I get to thinking there is a compatibility team in these companies that ensures minimal compatibility across years and brands......
__________________
Cheers, Mike
Cheers, Mike
#4
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 39,015
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 141 Post(s)
Tagged: 1 Thread(s)
Quoted: 5939 Post(s)
Liked 2,842 Times
in
1,585 Posts
+1
Campy offered many of their wheels in Shimano versions, so freehub rotors exist for most wheels.
Campy offered many of their wheels in Shimano versions, so freehub rotors exist for most wheels.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#5
Full Member
Thread Starter
Join Date: Mar 2024
Location: San Diego
Posts: 484
Bikes: Columbine, Paramount Track Bike, Colnago Super, Santana Tandems (1995 & 2007), Gary Fisher Piranha, Trek Wahoo, Bianchi Track Bike, a couple of Honda mountain bikes
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 234 Post(s)
Liked 151 Times
in
99 Posts
My hub is an Athena 9-speed.
Also, does Campagnolo have a web based compatibility chart like Shimano?
__________________
Cheers, Mike
Cheers, Mike
Last edited by PromptCritical; 05-17-24 at 06:59 PM.
#6
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 39,015
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 141 Post(s)
Tagged: 1 Thread(s)
Quoted: 5939 Post(s)
Liked 2,842 Times
in
1,585 Posts
I just did a quick search for Shimano freehub for Fulcrum and brought up a few, plus it also linked a search for same on Campy.
So finding some is easy. That said, knowing interchanges for specific models is trickier.
AFAIK (remember) they never made one for Athena hubs, but there's a chance that one made for one of the wheels may fit.
Try calling or emailing Campy USA and they might know which, if any, will fit.
Another option might be spacing a Campy cassette for Shimano.
So finding some is easy. That said, knowing interchanges for specific models is trickier.
AFAIK (remember) they never made one for Athena hubs, but there's a chance that one made for one of the wheels may fit.
Try calling or emailing Campy USA and they might know which, if any, will fit.
Another option might be spacing a Campy cassette for Shimano.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
Likes For FBinNY:
#7
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,590
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 513 Post(s)
Tagged: 0 Thread(s)
Quoted: 7397 Post(s)
Liked 2,571 Times
in
1,498 Posts
For about two years, I mixed components: Shimano shifters, and derailleurs with Campagnolo wheel and cassette. It did not work perfectly: on some shifts, I had to click twice. But it didn't make that grinding noise that came from being "between" gears on a friction system, so I didn't mind much. This may not satisfy you, but I thought I would mention it.
@FBinNY mentions spacing the cassette yourself. That sounds tricky, as you have to measure the spacers and cogs precisely, but I knew one person who succeeded at doing it.
@FBinNY mentions spacing the cassette yourself. That sounds tricky, as you have to measure the spacers and cogs precisely, but I knew one person who succeeded at doing it.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#8
Full Member
Thread Starter
Join Date: Mar 2024
Location: San Diego
Posts: 484
Bikes: Columbine, Paramount Track Bike, Colnago Super, Santana Tandems (1995 & 2007), Gary Fisher Piranha, Trek Wahoo, Bianchi Track Bike, a couple of Honda mountain bikes
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 234 Post(s)
Liked 151 Times
in
99 Posts
For about two years, I mixed components: Shimano shifters, and derailleurs with Campagnolo wheel and cassette. It did not work perfectly: on some shifts, I had to click twice. But it didn't make that grinding noise that came from being "between" gears on a friction system, so I didn't mind much. This may not satisfy you, but I thought I would mention it.
@FBinNY mentions spacing the cassette yourself. That sounds tricky, as you have to measure the spacers and cogs precisely, but I knew one person who succeeded at doing it.
@FBinNY mentions spacing the cassette yourself. That sounds tricky, as you have to measure the spacers and cogs precisely, but I knew one person who succeeded at doing it.
__________________
Cheers, Mike
Cheers, Mike
#9
Full Member
Try searching the word "shimergo" and you'll go down the rabbit hole of mixing Shimano and Campy. I had 2 bikes successfully working with such a setup (9 and 10 spd) but I believe the effort to get them working properly is too much, especially now that you can get cheap shifters from the likes of Sensah, Microshift or LTwoo to get older 7,8,9 or 10 spd bikes upgraded to modern shifting.
#10
Senior Member
Join Date: Feb 2018
Posts: 571
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 243 Post(s)
Liked 234 Times
in
155 Posts
I found a set of Campagnolo wheels with a 9/10/11/12 speed freehub.
Is there a way to change the freehub to a shimano spline format?
I know there is a thread on BF about this, but it is 15 years old.
Also, is there an available reference to Campy standards (maybe starting with freehubs to current stuff) somewhere?
Is there a way to change the freehub to a shimano spline format?
I know there is a thread on BF about this, but it is 15 years old.
Also, is there an available reference to Campy standards (maybe starting with freehubs to current stuff) somewhere?
Likes For RGMN:
#11
Full Member
Thread Starter
Join Date: Mar 2024
Location: San Diego
Posts: 484
Bikes: Columbine, Paramount Track Bike, Colnago Super, Santana Tandems (1995 & 2007), Gary Fisher Piranha, Trek Wahoo, Bianchi Track Bike, a couple of Honda mountain bikes
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 234 Post(s)
Liked 151 Times
in
99 Posts
Most Campag and Fulcrum wheels since 2007 can be converted to HG with the FH-BO015X1 freehub if they have a cutout alloy axle. If it doesn't have the cutout axle you will need one, FH-BO001. At this point it is probably less expensive to get some new wheels. Some of the newer wheels will require a different freehub, they are listed in the Campag spare parts catalogs https://support.campagnolo.com/media...rt_C_Rev00.pdf
__________________
Cheers, Mike
Cheers, Mike
Last edited by PromptCritical; 05-21-24 at 10:00 PM.
#13
Full Member
Thread Starter
Join Date: Mar 2024
Location: San Diego
Posts: 484
Bikes: Columbine, Paramount Track Bike, Colnago Super, Santana Tandems (1995 & 2007), Gary Fisher Piranha, Trek Wahoo, Bianchi Track Bike, a couple of Honda mountain bikes
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 234 Post(s)
Liked 151 Times
in
99 Posts
#14
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,590
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 513 Post(s)
Tagged: 0 Thread(s)
Quoted: 7397 Post(s)
Liked 2,571 Times
in
1,498 Posts
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#15
Senior Member
Join Date: Feb 2018
Posts: 571
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 243 Post(s)
Liked 234 Times
in
155 Posts