ISO and For Trade thread parts 2 and 3.
#1877
Senior Member
Looking for a:
Ladies' Phillips-style rear brake caliper (for a 1960 Dunelt 3-speed).
I'm in the US. Not sure what I could offer in trade, except the men's-style caliper that was on the bike when I got it.
Thanks!
Ladies' Phillips-style rear brake caliper (for a 1960 Dunelt 3-speed).
I'm in the US. Not sure what I could offer in trade, except the men's-style caliper that was on the bike when I got it.
Thanks!
#1878
Member
Join Date: Mar 2007
Location: Brooklyn
Posts: 30
Likes: 0
Liked 0 Times
in
0 Posts
ISO:
Stronglight 93 rings in 122bcd - anything from 42-50 tooth count.
700C clincher rims in silver - something narrower than SUN CR18s.
Derailleur claw for Simplex Prestige rear.
Can trade:
Simplex seatpost 26.6 - rider condition
Galli rear derailleur
Gnutti Airone flip-flop hubset
Pelissier high flange road hubs (not a set, one steel-barreled, both with wingnuts)
Selle San Marco suede saddle a little faded but in good condition
Universal Extra brakeset (calipers and levers)
Tubulars - Mavic, Fiamme, Weinman
And more, just ask. Will trade also trade a little cash if necessary.
PM me or email benbutler(seven-eight) at hot mail dotcom.
Stronglight 93 rings in 122bcd - anything from 42-50 tooth count.
700C clincher rims in silver - something narrower than SUN CR18s.
Derailleur claw for Simplex Prestige rear.
Can trade:
Simplex seatpost 26.6 - rider condition
Galli rear derailleur
Gnutti Airone flip-flop hubset
Pelissier high flange road hubs (not a set, one steel-barreled, both with wingnuts)
Selle San Marco suede saddle a little faded but in good condition
Universal Extra brakeset (calipers and levers)
Tubulars - Mavic, Fiamme, Weinman
And more, just ask. Will trade also trade a little cash if necessary.
PM me or email benbutler(seven-eight) at hot mail dotcom.
Last edited by beeb; 08-02-09 at 06:40 AM.
#1879
Wrench Savant
Have-
Campagnolo pantographed "Pogliaghi" Campy 144 BCD 53-tooth chainring. Some wear from use, but not bad.
Schwinn Approved track hub, bolt on - not nuts, alloy, 36 hole I think.
Want-
80's Shimano headset wrench...with the funny round divots for 600 and DA headsets
Fork alignment guage...maybe not a fair trade, but I'll ask.
45 tooth alloy 110 BCD chainring
52 or 53 tooth campy Colnago pantagraphed chainring
Those black shifters found on early 80's Colnago's
Anything else.
Campagnolo pantographed "Pogliaghi" Campy 144 BCD 53-tooth chainring. Some wear from use, but not bad.
Schwinn Approved track hub, bolt on - not nuts, alloy, 36 hole I think.
Want-
80's Shimano headset wrench...with the funny round divots for 600 and DA headsets
Fork alignment guage...maybe not a fair trade, but I'll ask.
45 tooth alloy 110 BCD chainring
52 or 53 tooth campy Colnago pantagraphed chainring
Those black shifters found on early 80's Colnago's
Anything else.
#1880
Senior Member
Join Date: Sep 2008
Location: Collegeville, PA
Posts: 1,350
Bikes: Ruckelshaus Randonneur, Specialized Allez (early 90's, steel), Ruckelshaus Path Bomber currently being built
Likes: 0
Liked 2 Times
in
2 Posts
I have 2 pair of older wheels that came with a bike I rebuilt. Local pickup only, I live in Collegeville, PA 19426:
27" x 1 1/4 Weinmann rims with OK rubber (Schraeder tubes) on Maillard 126mm freewheel hubs. Rear has a broken spoke but are otherwise in rideable condition.
700c Matrix clincher rims (very narrow) on Maillard 126mm freewheel hubs. Decent condition. No rubber.
Both wheel sets come with skewers. They won't win any beauty contests but work fine.
Looking for...not really sure. Let me know if you've got anything interesting.
Pete
27" x 1 1/4 Weinmann rims with OK rubber (Schraeder tubes) on Maillard 126mm freewheel hubs. Rear has a broken spoke but are otherwise in rideable condition.
700c Matrix clincher rims (very narrow) on Maillard 126mm freewheel hubs. Decent condition. No rubber.
Both wheel sets come with skewers. They won't win any beauty contests but work fine.
Looking for...not really sure. Let me know if you've got anything interesting.
Pete
#1881
Back In The Saddle
Join Date: Mar 2005
Location: Pacific Northwest
Posts: 2,318
Bikes: N+1
Likes: 0
Liked 8 Times
in
5 Posts
I have 2 pair of older wheels that came with a bike I rebuilt. Local pickup only, I live in Collegeville, PA 19426:
27" x 1 1/4 Weinmann rims with OK rubber (Schraeder tubes) on Maillard 126mm freewheel hubs. Rear has a broken spoke but are otherwise in rideable condition.
700c Matrix clincher rims (very narrow) on Maillard 126mm freewheel hubs. Decent condition. No rubber.
Both wheel sets come with skewers. They won't win any beauty contests but work fine.
Looking for...not really sure. Let me know if you've got anything interesting.
Pete
27" x 1 1/4 Weinmann rims with OK rubber (Schraeder tubes) on Maillard 126mm freewheel hubs. Rear has a broken spoke but are otherwise in rideable condition.
700c Matrix clincher rims (very narrow) on Maillard 126mm freewheel hubs. Decent condition. No rubber.
Both wheel sets come with skewers. They won't win any beauty contests but work fine.
Looking for...not really sure. Let me know if you've got anything interesting.
Pete
__________________
In life there are no mistakes, only lessons. -Shin
In life there are no mistakes, only lessons. -Shin
#1883
Junior Member
Join Date: Jul 2009
Posts: 9
Likes: 0
Liked 0 Times
in
0 Posts
Want:
Shimano Sante FC-5000 Crank Arms
Shimano Sante HB-5000 Front (32 hole)
Shimano Sante FH-5000 Rear Freehub (32 hole)
Please PM me and please be in decent condition
Shimano Sante FC-5000 Crank Arms
Shimano Sante HB-5000 Front (32 hole)
Shimano Sante FH-5000 Rear Freehub (32 hole)
Please PM me and please be in decent condition
Last edited by bikeforus; 08-03-09 at 10:27 PM.
#1884
Senior Member
Join Date: Apr 2009
Location: Manchester Center, Vt
Posts: 119
Bikes: 1995 Guerciotti Genius, 1992 Cannondale Delta V 1000, 1989 Cannondale SR500, 1987 Univega Nuovo Sport, 1984 Trek 620, 1983 Muddy Fox Monarch, 1960 Rudge Sports
Likes: 0
Liked 0 Times
in
0 Posts
Want:
Brooks Pro - decent shape
Brooks B-72 - decent shape
French threaded pedals
Nice toe clips/straps
Campy 8 speed stuff
Have:
Schwalbe Ultremo R 700x23 - new in box (2)
Schwalbe Marathon 700x32 - new (2)
Vittoria Rubino Pro (good/used) (2)
Araya 27" wheels anodized Bronze w/6 speed freewheel - excellent shape - double wall
Araya 27" wheels wide section w/5 speed freewheel - excellent shape
Univega Specialissima Frame 62cm - Like a Miyata 1000 - good condition w/tange headset - Seat tube - 62cm ctc
Top tube 58.5 ctc
Chainstay 44cm (from the center of the bottom bracket to the center of where the axle would be)
Vintage Kashimax saddle - good condition
NOS Royal Compe II brakeset - NOS - black enamel
Aero Gran Compe brake levers (the ones with the internal springs) excellent mechanical - so/so cosmetic shape.
Link to pictures of wheels and Univega frame:
https://www.flickr.com/photos/8081497@N04/?saved=1
Other stuff! Can add cash!
Thanks-
Rich
Brooks Pro - decent shape
Brooks B-72 - decent shape
French threaded pedals
Nice toe clips/straps
Campy 8 speed stuff
Have:
Schwalbe Ultremo R 700x23 - new in box (2)
Schwalbe Marathon 700x32 - new (2)
Vittoria Rubino Pro (good/used) (2)
Araya 27" wheels anodized Bronze w/6 speed freewheel - excellent shape - double wall
Araya 27" wheels wide section w/5 speed freewheel - excellent shape
Univega Specialissima Frame 62cm - Like a Miyata 1000 - good condition w/tange headset - Seat tube - 62cm ctc
Top tube 58.5 ctc
Chainstay 44cm (from the center of the bottom bracket to the center of where the axle would be)
Vintage Kashimax saddle - good condition
NOS Royal Compe II brakeset - NOS - black enamel
Aero Gran Compe brake levers (the ones with the internal springs) excellent mechanical - so/so cosmetic shape.
Link to pictures of wheels and Univega frame:
https://www.flickr.com/photos/8081497@N04/?saved=1
Other stuff! Can add cash!
Thanks-
Rich
Last edited by 24tracktape; 08-04-09 at 01:57 PM.
#1885
Member
Join Date: Mar 2007
Location: Brooklyn
Posts: 30
Likes: 0
Liked 0 Times
in
0 Posts
I'm completely desperate for 122bcd Stronglight chainrings. Anything between 42-50 tooth count. I gotta get a bike on the road!
Anybody?
Anybody?
#1886
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,811
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Liked 577 Times
in
342 Posts
#1887
Junior Member
Join Date: Apr 2007
Location: Laramie, Wy
Posts: 184
Likes: 0
Liked 0 Times
in
0 Posts
Have:
C-Record english bb
C-Record clamp front derailleur
7400 Dura-Ace, brakes, levers, wheels, casette, 25.0 seatpost
600 Tricolor brakes, levers, cranks x2, front derailleur x2, rear derailleur, bottom bracket, headset x2, wheels, casette x2
Campy Mirage 8speed brifters, front derailleur and rear wheel (not campy)
55cm Somec Elite, decals flaked off but good condition
57cm Vitus 979, pink & awesome
Shimano Ex stem
3T stem in smoked chrome
Wanted:
C-Record Itallian BB
C-Record front hub/wheels
Campagnolo Deltas of any description
Funky classic frame 57-58cm, would love a track frame; haven't done that yet...
Any Masi pantographed component (seatpost, stem, rings...)
I finally found a frame I want to build up (Italian Masi 3v) with C-Record so I'm on the hunt for the parts I don't have/wrong specs. Would love to get started on the build!! Can get pics of anything you'd like.
Thanks so much!
WjV
C-Record english bb
C-Record clamp front derailleur
7400 Dura-Ace, brakes, levers, wheels, casette, 25.0 seatpost
600 Tricolor brakes, levers, cranks x2, front derailleur x2, rear derailleur, bottom bracket, headset x2, wheels, casette x2
Campy Mirage 8speed brifters, front derailleur and rear wheel (not campy)
55cm Somec Elite, decals flaked off but good condition
57cm Vitus 979, pink & awesome
Shimano Ex stem
3T stem in smoked chrome
Wanted:
C-Record Itallian BB
C-Record front hub/wheels
Campagnolo Deltas of any description
Funky classic frame 57-58cm, would love a track frame; haven't done that yet...
Any Masi pantographed component (seatpost, stem, rings...)
I finally found a frame I want to build up (Italian Masi 3v) with C-Record so I'm on the hunt for the parts I don't have/wrong specs. Would love to get started on the build!! Can get pics of anything you'd like.
Thanks so much!
WjV
Last edited by WJV; 08-15-09 at 04:41 PM.
#1888
Who cares, just ride it!
Join Date: Jun 2006
Location: Melbourne
Posts: 989
Bikes: 1992ish Davidson Impulse, 1981 Apollo Gran Sport SS, 2006 Salsa Las Cruces, 2010 Soma Double Cross
Likes: 0
Liked 4 Times
in
4 Posts
HAVE:
* Campy Chorus Italian BB
* Stronglight P3 headset with extra lower cup
* Mafac Competition front caliper (no straddle cable unfortunately)
* Dia Compe Aero Gran Compe calipers (A C300G) and levers (A C250G, could do with new hoods)
* Dia Compe GX 400 calipers, recessed-mount
* Suntour Cyclone MK. II front and rear derailleurs and shifters
* Suntour bar end / bar con shifters (missing one "locknut", but doesn't affect operation)
* SR Laprade 27.2 fluted seatpost
* other stuff, just ask
WANT:
* Shimano tri-colour 600 / Sante / Dura Ace aero levers, preferably with black or grey hoods, not white
* Shimano tri-colour 600 or Dura Ace 7400 front derailleur, clamp on
* Campy Chorus Italian BB
* Stronglight P3 headset with extra lower cup
* Mafac Competition front caliper (no straddle cable unfortunately)
* Dia Compe Aero Gran Compe calipers (A C300G) and levers (A C250G, could do with new hoods)
* Dia Compe GX 400 calipers, recessed-mount
* Suntour Cyclone MK. II front and rear derailleurs and shifters
* Suntour bar end / bar con shifters (missing one "locknut", but doesn't affect operation)
* SR Laprade 27.2 fluted seatpost
* other stuff, just ask
WANT:
* Shimano tri-colour 600 / Sante / Dura Ace aero levers, preferably with black or grey hoods, not white
* Shimano tri-colour 600 or Dura Ace 7400 front derailleur, clamp on
Last edited by Antipodes; 08-12-09 at 05:26 PM.
#1889
Senior Member
Join Date: Aug 2007
Location: Western North Carolina
Posts: 434
Likes: 0
Liked 0 Times
in
0 Posts
Want:
Nice quality 26" wheelset, 126mm rear hub spacing. 36 hole. Prefer all silver w/cartridge bearing hubs but tell me what you got.
Nitto dirtdrop stem, 80mm
Silver Surly front and rear racks
Have:
A few nice parts
1990 Schwinn Voyageur built for loaded touring w/some fancy stuff that I might be looking to trade
Let me know what you want, perhaps we can work something out
PM me
Nice quality 26" wheelset, 126mm rear hub spacing. 36 hole. Prefer all silver w/cartridge bearing hubs but tell me what you got.
Nitto dirtdrop stem, 80mm
Silver Surly front and rear racks
Have:
A few nice parts
1990 Schwinn Voyageur built for loaded touring w/some fancy stuff that I might be looking to trade
Let me know what you want, perhaps we can work something out
PM me
Last edited by digitalbicycle; 08-05-09 at 07:09 PM. Reason: Updated
#1890
Senior Member
Join Date: Sep 2008
Posts: 342
Likes: 0
Liked 0 Times
in
0 Posts
San Marco Rolls Ti White saddle, almost new with box - looking to trade for San Marco Regal Ti in White. PM me.
#1892
No one cares
ISO
shimano 600 rear axle. Mine busted...
shimano 600 rear axle. Mine busted...
__________________
I prefer emails to private messages - holiday76@gmail.com
Jack Taylor Super Tourer Tandem (FOR SALE), Jack Taylor Tour of Britain, Px-10, Carlton Flyer, Fuji The Finest, Salsa Fargo, Santa Cruz Tallboy, Carver All-Road .
I prefer emails to private messages - holiday76@gmail.com
Jack Taylor Super Tourer Tandem (FOR SALE), Jack Taylor Tour of Britain, Px-10, Carlton Flyer, Fuji The Finest, Salsa Fargo, Santa Cruz Tallboy, Carver All-Road .
#1893
Who cares, just ride it!
Join Date: Jun 2006
Location: Melbourne
Posts: 989
Bikes: 1992ish Davidson Impulse, 1981 Apollo Gran Sport SS, 2006 Salsa Las Cruces, 2010 Soma Double Cross
Likes: 0
Liked 4 Times
in
4 Posts
https://cgi.ebay.com/NOS-VINTAGE-STRO...d=p3286.c0.m14
https://cgi.ebay.com/NOS-VINTAGE-STRO...d=p3286.c0.m14
https://cgi.ebay.com/NOS-VINTAGE-STRO...d=p3286.c0.m14
https://cgi.ebay.com/NOS-VINTAGE-STRO...d=p3286.c0.m14
https://cgi.ebay.com/NOS-STRONGLIGHT-...d=p3286.c0.m14
#1894
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,602
Bikes: https://www.theheadbadge.com
Liked 4,537 Times
in
2,142 Posts
-Kurt
#1897
No one cares
yes I do need cones. Sorry, forgot to mention that.
__________________
I prefer emails to private messages - holiday76@gmail.com
Jack Taylor Super Tourer Tandem (FOR SALE), Jack Taylor Tour of Britain, Px-10, Carlton Flyer, Fuji The Finest, Salsa Fargo, Santa Cruz Tallboy, Carver All-Road .
I prefer emails to private messages - holiday76@gmail.com
Jack Taylor Super Tourer Tandem (FOR SALE), Jack Taylor Tour of Britain, Px-10, Carlton Flyer, Fuji The Finest, Salsa Fargo, Santa Cruz Tallboy, Carver All-Road .
#1899
Senior Member
Join Date: Aug 2007
Location: Western North Carolina
Posts: 434
Likes: 0
Liked 0 Times
in
0 Posts
OK, I've changed tack a little bit -- here's a long shot. Anyone got a set of Phil Wood hubs, 126mm freewheel rear, that they're looking to trade?
I've got:
- Specialized pantographed (made by Nitto) dirtdrop stem w/through cable routing from '86 Stumpjumper sport
- Deore XT friction thumbshifters from same bike, haven't been able to get front to stop slipping but I'm not a great mechanic
- Specialized (made by Nitto) mtb bar from same bike
- Specialized touring triple 110/74 w/orig. bottom bracket from same bike
- Dura Ace 7402 crankset, 175mm
- Other goodies
- What else do you want, maybe we can work something out
I've got:
- Specialized pantographed (made by Nitto) dirtdrop stem w/through cable routing from '86 Stumpjumper sport
- Deore XT friction thumbshifters from same bike, haven't been able to get front to stop slipping but I'm not a great mechanic
- Specialized (made by Nitto) mtb bar from same bike
- Specialized touring triple 110/74 w/orig. bottom bracket from same bike
- Dura Ace 7402 crankset, 175mm
- Other goodies
- What else do you want, maybe we can work something out
Last edited by digitalbicycle; 08-07-09 at 08:35 PM.
#1900
Senior Member
Join Date: Jun 2007
Location: Chicago
Posts: 243
Bikes: '82 Trek 613, '83 Lotus Eclair, '86 (?) Yokota Ranger, '85 Schwinn Cimarron
Likes: 0
Liked 0 Times
in
0 Posts
I think the specialized touring triples were sugino xd2, which rivendell and others love as one of the finest triples ever made. I found one at the co-op the other day, just need a left crank to match.