Anything cleaner than WD40?
#26
Farmer tan
Interesting!!! A refresher course--who knew?
Water Displacement #40. The product began from a search for a rust preventative solvent and degreases to protect missile parts. WD-40 was created in 1953 by three technicians at the San Diego Rocket Chemical Company. Its name comes from the project that was to find a water displacement com-
pound. They were successful with the 40th formulation, thus WD-40. The Corvair Company bought it in bulk to protect their atlas missile parts.
Ken East (one of the original founders) says there is nothing in WD-40 that would hurt you...' IT IS MADE FROM FISH OIL'
When you read the 'shower door' part, try it. It's the first thing that has ever cleaned that spotty shower door. If yours is plastic, it works just as well as glass. It is a miracle! Then try it on your stovetop... It is now shinier than it has ever been before.
1) Protects silver from tarnishing.
2) Removes road tar and grime from cars.
3) Cleans and lubricates guitar strings.
4) Gives floors that ..just-waxed.. sheen without making it slippery.
5) Keeps flies off cows.
6) Restores and cleans chalkboards.
7) Removes lipstick stains
8) Loosens stubborn zippers.
9) Untangles jewelry chains.
10) Removes stains from stainless steel sinks.
11) Removes dirt and grime from the barbecue grill.
12) Keeps ceramic/terra cotta garden pots from oxidizing.
13) Removes tomato stains from clothing.
14) Keeps glass shower doors free of water spots.
15) Camouflages scratches in ceramic and marble floors.
16) Keeps scissors working smoothly.
17) Lubricates noisy door hinges on vehicles and doors in homes.
18) It removes black scuff marks from the kitchen floor! Open some windows if you have a lot of marks.
19) Bug guts will eat away the finish on your car. Removed quickly, with WD-40!
20) Gives a children's play gym slide a shine for a super fast slide.
21) Lubricates gear shift on lawn mowers.
22) Rids kids rocking chairs and swings of squeaky noises.
23) Lubricates tracks in sticking home windows and makes them easier to open.
24) Spraying an umbrella stem makes it easier to open and close.
25) Restores and cleans padded leather dash boards in vehicles, as well as vinyl bumpers.
26) Restores and cleans roof racks on vehicles.
27) Lubricates and stops squeaks in electric fans.
28) Lubricates wheel sprockets on tricycles, wagons, and bicycles for easy handling.
29) Lubricates fan belts on washers and dryers and keeps them running smoothly.
30) Keeps rust from forming on saws and saw blades, and other tools.
31) Removes splattered grease on stove.
32) Keeps bathroom mirror from fogging.
33) Lubricates prosthetic limbs.
34) Keeps pigeons off the balcony (they hate the smell).
35) Removes all traces of duct tape.
36) Folks even spray it on their arms, hands, and knees to relieve arthritis pain .
37) Florida's favorite use 'Cleans and removes love bugs from grills and bumpers.'
38) Protects the Statue of Liberty from the elements.
39) WD-40 attracts fish. Spray a LITTLE on live bait or lures and you will be catching the big one in no time.
40) Fire ant bites . It takes the sting away immediately and stops the itch.
41) WD-40 is great for removing crayon from walls. Spray on the mark and wipe with a clean rag.
42) If you've washed and dried a tube of lipstick with a load of laundry, saturate the lipstick spots with WD-40 and re-wash. Presto! Lipstick is gone!
43) If you spray WD-40 on the distributor cap, it will displace the moisture and allow the car to start.
I keep a can of WD-40 in my kitchen cabinet over the stove. It is good for oven burns or any other type of burn. It takes the burned feeling away and heals with NO scarring
Remember, the basic ingredient is FISH OIL
Water Displacement #40. The product began from a search for a rust preventative solvent and degreases to protect missile parts. WD-40 was created in 1953 by three technicians at the San Diego Rocket Chemical Company. Its name comes from the project that was to find a water displacement com-
pound. They were successful with the 40th formulation, thus WD-40. The Corvair Company bought it in bulk to protect their atlas missile parts.
Ken East (one of the original founders) says there is nothing in WD-40 that would hurt you...' IT IS MADE FROM FISH OIL'
When you read the 'shower door' part, try it. It's the first thing that has ever cleaned that spotty shower door. If yours is plastic, it works just as well as glass. It is a miracle! Then try it on your stovetop... It is now shinier than it has ever been before.
1) Protects silver from tarnishing.
2) Removes road tar and grime from cars.
3) Cleans and lubricates guitar strings.
4) Gives floors that ..just-waxed.. sheen without making it slippery.
5) Keeps flies off cows.
6) Restores and cleans chalkboards.
7) Removes lipstick stains
8) Loosens stubborn zippers.
9) Untangles jewelry chains.
10) Removes stains from stainless steel sinks.
11) Removes dirt and grime from the barbecue grill.
12) Keeps ceramic/terra cotta garden pots from oxidizing.
13) Removes tomato stains from clothing.
14) Keeps glass shower doors free of water spots.
15) Camouflages scratches in ceramic and marble floors.
16) Keeps scissors working smoothly.
17) Lubricates noisy door hinges on vehicles and doors in homes.
18) It removes black scuff marks from the kitchen floor! Open some windows if you have a lot of marks.
19) Bug guts will eat away the finish on your car. Removed quickly, with WD-40!
20) Gives a children's play gym slide a shine for a super fast slide.
21) Lubricates gear shift on lawn mowers.
22) Rids kids rocking chairs and swings of squeaky noises.
23) Lubricates tracks in sticking home windows and makes them easier to open.
24) Spraying an umbrella stem makes it easier to open and close.
25) Restores and cleans padded leather dash boards in vehicles, as well as vinyl bumpers.
26) Restores and cleans roof racks on vehicles.
27) Lubricates and stops squeaks in electric fans.
28) Lubricates wheel sprockets on tricycles, wagons, and bicycles for easy handling.
29) Lubricates fan belts on washers and dryers and keeps them running smoothly.
30) Keeps rust from forming on saws and saw blades, and other tools.
31) Removes splattered grease on stove.
32) Keeps bathroom mirror from fogging.
33) Lubricates prosthetic limbs.
34) Keeps pigeons off the balcony (they hate the smell).
35) Removes all traces of duct tape.
36) Folks even spray it on their arms, hands, and knees to relieve arthritis pain .
37) Florida's favorite use 'Cleans and removes love bugs from grills and bumpers.'
38) Protects the Statue of Liberty from the elements.
39) WD-40 attracts fish. Spray a LITTLE on live bait or lures and you will be catching the big one in no time.
40) Fire ant bites . It takes the sting away immediately and stops the itch.
41) WD-40 is great for removing crayon from walls. Spray on the mark and wipe with a clean rag.
42) If you've washed and dried a tube of lipstick with a load of laundry, saturate the lipstick spots with WD-40 and re-wash. Presto! Lipstick is gone!
43) If you spray WD-40 on the distributor cap, it will displace the moisture and allow the car to start.
I keep a can of WD-40 in my kitchen cabinet over the stove. It is good for oven burns or any other type of burn. It takes the burned feeling away and heals with NO scarring
Remember, the basic ingredient is FISH OIL
#27
Senior Member
Join Date: Jul 2006
Location: Newport, CA
Posts: 138
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#30
VeloFellow
Join Date: Jan 2008
Location: Los Angeles
Posts: 273
Bikes: Commuter(Specialized Globe 6,IG8), Mountain (Specialized FSR), Road (Felt F55-2006)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I don't use WD-40 on my bikes...
Try ProLink Chain Lube squeeze bottle.... best stuff I found for street use bike chains.
T-9 Spray Can is great for post ride cleaning and protecting of parts, shifters, brakes (not pads of course), cables and such. Great for rust protection and when I use it with a microfiber towel, I get rid of all that street crud from my gears.
I haven't used Tri-flo for a long while... more for when I mountain biked.
White Lighting is a great chain lubricant for mountain biking, dirt, sand, mud... that sort of thing. Wouldn't use it for street bikes.
Clean bike, happy bike, happy bike, happy cyclist.
Try ProLink Chain Lube squeeze bottle.... best stuff I found for street use bike chains.
T-9 Spray Can is great for post ride cleaning and protecting of parts, shifters, brakes (not pads of course), cables and such. Great for rust protection and when I use it with a microfiber towel, I get rid of all that street crud from my gears.
I haven't used Tri-flo for a long while... more for when I mountain biked.
White Lighting is a great chain lubricant for mountain biking, dirt, sand, mud... that sort of thing. Wouldn't use it for street bikes.
Clean bike, happy bike, happy bike, happy cyclist.
#31
Pedals, Paddles and Poles
Join Date: Oct 2009
Location: Vegas Valley, NV
Posts: 5,495
Bikes: Santa Cruz Tallboy, Ridley Noah, Scott Spark 20
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1233 Post(s)
Liked 69 Times
in
58 Posts
My local bike shop took me out back and whipped with old hyperglides for allowing WD40 to touch my bike. According the JT's, (good bunch) it removes all lubrication from whatever it touches. Use bike specific products (I do like the BrakeClean idea though).
#32
Lio Fralop
Join Date: Nov 2009
Location: Milwaukee
Posts: 263
Bikes: '95 Klein Attitude w/XT & '05 Klein Aura w/Ultegra
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Wrong. WD-40 contains the same 20-30% oil as my regular homebrew lube. I've actually used it in a long term chain wear test. I found that the oil in WD-40 does not do nearly as good a job of preventing elongation as motor oil or gear lube, thinned 4/1 with naptha. I't's fine for items like derailleur pivots, but not good for a chain.
#33
Single-serving poster
Join Date: Aug 2009
Location: Toronto, Canada
Posts: 5,098
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
From KMC, you know those guys who make all those chains.
Cleaning
- Clean your chain after each trip, especially after riding in the wet.
- Always use a piece of dry cloth to clean the chain and it's component parts.
- If neccesary, use an old toothbrush to clean between the plates.
- Do not forget the sprockets, front changer and derailleur pulleys.
- To remove mud or sand, use a bristle brush, if necessary with light soapy warm water.
- Never use acidic or alkali based detergents (such as rust cleaners), these agents can damage the
chain and may cause breakage.
- NEVER EVER use a so-called'chain washing machine' in combination with solvent. This is the one
and only sure way to instantly ruin your chain.
- Avoid the use of solvents, not only are these bad for the environment, they remove lubricant from the
chain's bearing.
If I recall WD-40 contains a rust-cleaner and most of it evapourates leaving not much oil remaining in your rollers.
- Clean your chain after each trip, especially after riding in the wet.
- Always use a piece of dry cloth to clean the chain and it's component parts.
- If neccesary, use an old toothbrush to clean between the plates.
- Do not forget the sprockets, front changer and derailleur pulleys.
- To remove mud or sand, use a bristle brush, if necessary with light soapy warm water.
- Never use acidic or alkali based detergents (such as rust cleaners), these agents can damage the
chain and may cause breakage.
- NEVER EVER use a so-called'chain washing machine' in combination with solvent. This is the one
and only sure way to instantly ruin your chain.
- Avoid the use of solvents, not only are these bad for the environment, they remove lubricant from the
chain's bearing.
#34
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,583
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 513 Post(s)
Tagged: 0 Thread(s)
Quoted: 7395 Post(s)
Liked 2,560 Times
in
1,490 Posts
I recently started using Simple Green, undiluted, to scrub gunky chains clean.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#35
Bike addict, dreamer
Join Date: Nov 2009
Location: Queens, New York
Posts: 5,165
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
For tough jobs I use an off-the-shelf degreaser from Costco, BJs, Home Depot or automotive shops. The one that smells kind of like Fantastik. It's made for cleaning tools and metal parts and it doesn't harm plastic, rubber and paint. It just stinks badly and yes, it removes all grease down to bare metal so use caution and re-lube afterward, and yeah, it's probably bad for the environment. I flush it immediately with cold water, dry the parts quickly and lube right away though. The stuff is like $5-8/gallon. The bike specific degreasers are a ripoff IMHO, but I still use them for lighter jobs.
Never use anything designed for rust removal!!! It'll "eat" the metal and corrode/weaken it.
Use a lubricant that is appropriate for the given part.
A tip: I use my shop vac as a blower with a thin attachment to dry parts by blowing the water away.
Z.
Never use anything designed for rust removal!!! It'll "eat" the metal and corrode/weaken it.
Use a lubricant that is appropriate for the given part.
A tip: I use my shop vac as a blower with a thin attachment to dry parts by blowing the water away.
Z.