Looking for disc 36h cartridge value hubs
#1
Senior Member
Thread Starter
Join Date: Feb 2013
Location: Midwest USA
Posts: 61
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Looking for disc 36h cartridge value hubs
Hello,
I am far from an expert in this subject, bicycle hubs! I am looking for some front and rear bicycle hubs that use cartridges rather that cup and cone. I was considering some hope pro 2 evo hubs, but those prices are a bit outrageous. At this point I don't care if it's freewheel or cassette, just so long as it's 36 hole, disc and uses cartridge bearings. I won't mention a specific price range, just that I am looking for value, it can weigh more than the top of the line hub.
Know of something that I might be interested in?
Thanks
I am far from an expert in this subject, bicycle hubs! I am looking for some front and rear bicycle hubs that use cartridges rather that cup and cone. I was considering some hope pro 2 evo hubs, but those prices are a bit outrageous. At this point I don't care if it's freewheel or cassette, just so long as it's 36 hole, disc and uses cartridge bearings. I won't mention a specific price range, just that I am looking for value, it can weigh more than the top of the line hub.
Know of something that I might be interested in?
Thanks
#2
Senior Member
Why do you care so much about it being cartridge bearing if you don't care if it's a freewheel or cassette? Seems like an odd thing to be focusing on. Just curious.
I'm not sure about 36h hubs with cartridges. I know White Industries T11 comes in 36h, but I'm guessing you'll find their price "outrageous" too.
EDIT: Sorry you asked for disc, so forget the WI T11.
How about this:
https://www.universalcycles.com/shop...s.php?id=17010
No idea if it's any good.
I'm not sure about 36h hubs with cartridges. I know White Industries T11 comes in 36h, but I'm guessing you'll find their price "outrageous" too.
EDIT: Sorry you asked for disc, so forget the WI T11.
How about this:
https://www.universalcycles.com/shop...s.php?id=17010
No idea if it's any good.
Last edited by dr_lha; 06-02-15 at 02:29 PM.
#3
Senior Member
Thread Starter
Join Date: Feb 2013
Location: Midwest USA
Posts: 61
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks so much for the response.
That is an excellent question. In the past, I have replaced bearings when servicing cup and cone(CnC) hubs, I have even replaced cones. But I have never replaced a cup because I have never had a CnC hub that had a replaceable cup, this has bothered me for a long time. I have been avoiding the idea of buying more CnC hubs, such as the shimano m756, if the cup was replaceable in all CnC hubs, I never would have made this post.
This leads us to the cassette and freewheel idea. Honestly, I prefer freewheels, but as far as it not mattering to me, it doesn't because the freewheel and freehub parts are 100% replaceable and the maintenance on both are pretty simple and easy. I feel servicing a freewheel plenty quick and easy, but I can live with either for certain, I just don't want to pay $180+ for a bicycle hub.
Thanks, it's a maybe.
This leads us to the cassette and freewheel idea. Honestly, I prefer freewheels, but as far as it not mattering to me, it doesn't because the freewheel and freehub parts are 100% replaceable and the maintenance on both are pretty simple and easy. I feel servicing a freewheel plenty quick and easy, but I can live with either for certain, I just don't want to pay $180+ for a bicycle hub.
#4
Senior Member
Honestly, I'm not sure you'd ever find a hub which is compatible with disc breaks, a freewheel and has cartridge bearings.
#5
Senior Member
Hub width? 130, 135,142,148,150 mm or wider? QR, 10,12 or 15mm through axles? Not going to find freewheel stuff with disc brakes.
#6
Senior Member
Join Date: Jun 2014
Posts: 875
Bikes: custom Cyclery North (Chicago), Schwinn Circuit
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 203 Times
in
118 Posts
Here is a Weinmann wheel with a sealed Quanta hub in 27" for $99. If you can't use the rims, strip it for the hubs.
WEINMANN LP18 SILVER 27 126mm ROAD 5/6/7 speed wheelset [72774716654] - $99.00 Velomine.com : Worldwide Bicycle Shop, fixed gear track bike wheelsets campagnolo super record vintage bike
WEINMANN LP18 SILVER 27 126mm ROAD 5/6/7 speed wheelset [72774716654] - $99.00 Velomine.com : Worldwide Bicycle Shop, fixed gear track bike wheelsets campagnolo super record vintage bike
#7
Senior Member
Thread Starter
Join Date: Feb 2013
Location: Midwest USA
Posts: 61
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Here is a Weinmann wheel with a sealed Quanta hub in 27" for $99. If you can't use the rims, strip it for the hubs.
WEINMANN LP18 SILVER 27 126mm ROAD 5/6/7 speed wheelset [72774716654] - $99.00 Velomine.com : Worldwide Bicycle Shop, fixed gear track bike wheelsets campagnolo super record vintage bike
WEINMANN LP18 SILVER 27 126mm ROAD 5/6/7 speed wheelset [72774716654] - $99.00 Velomine.com : Worldwide Bicycle Shop, fixed gear track bike wheelsets campagnolo super record vintage bike
#8
Senior Member
Join Date: Aug 2006
Posts: 1,895
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 184 Post(s)
Likes: 0
Liked 67 Times
in
53 Posts
$155: https://www.velocityusa.com/product/h...-disc-rear-hub
Some 'sealed cartridge bearing' hubs are just called 'sealed bearing' hubs and if you look at the exploded diagrams of some hubs, you'll see sealed cartridge bearings just listed as bearings.
There's probably more sealed cartridge hubs around then you think there is.
Some 'sealed cartridge bearing' hubs are just called 'sealed bearing' hubs and if you look at the exploded diagrams of some hubs, you'll see sealed cartridge bearings just listed as bearings.
There's probably more sealed cartridge hubs around then you think there is.
#9
Senior Member
Thread Starter
Join Date: Feb 2013
Location: Midwest USA
Posts: 61
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Yikessss. Maybe I can choke down the price of $100 max for a rear hub, but they want $112 just for their front version. You'd think for some of these prices the hubs were lubricated with baby leprechaun blood and were self propelling or at least had a motor in them. I am not interested in the over priced weight weenie BS, I am perfectly fine dragging around a 'boat anchor' for a hub. I'd sooner stick with shimano M756/a's.
Right now novatec hubs seems like a decent maybe for considering something as a value bicycle hub, some of the prices I've found on them seem far more reasonable for something with a few moving parts. Some things I've read online didn't seem too horrible. Perhaps there is more like this?
#10
Senior Member
Join Date: Apr 2015
Location: Raleigh, NC
Posts: 1,892
Bikes: Fuji Sportif 1.3 C - 2014
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Why do you care so much about it being cartridge bearing if you don't care if it's a freewheel or cassette? Seems like an odd thing to be focusing on. Just curious.
I'm not sure about 36h hubs with cartridges. I know White Industries T11 comes in 36h, but I'm guessing you'll find their price "outrageous" too.
EDIT: Sorry you asked for disc, so forget the WI T11.
How about this:
https://www.universalcycles.com/shop...s.php?id=17010
No idea if it's any good.
I'm not sure about 36h hubs with cartridges. I know White Industries T11 comes in 36h, but I'm guessing you'll find their price "outrageous" too.
EDIT: Sorry you asked for disc, so forget the WI T11.
How about this:
https://www.universalcycles.com/shop...s.php?id=17010
No idea if it's any good.
November says that the WI Ti hubs are just as good as the WI T11 hubs.
Our answer to riders' high performance alloy wheel challenge is to begin with our November Nimbus Ti hubs, manufactured by White Industries. Their most important features are shared directly with the T11: bearings (Enduro-made ABEC 5), axles (steel rear, aluminum front), titanium cassette body, geometry, and weight are all the same between the two. They come the titanium grey/silver color as pictured. A simpler hub shell, limited colors, and economies of scale afforded by a streamlined purchasing and hand building process is responsible for all of the cost savings.
So, this might work for you. If you just want hubs, than the WI Ti hubs should work.
GH
#11
Senior Member
Thread Starter
Join Date: Feb 2013
Location: Midwest USA
Posts: 61
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
It looks like sometime this month November Wheels will start making Nimbus Ti Disc wheels.
November says that the WI Ti hubs are just as good as the WI T11 hubs.
Our answer to riders' high performance alloy wheel challenge is to begin with our November Nimbus Ti hubs, manufactured by White Industries. Their most important features are shared directly with the T11: bearings (Enduro-made ABEC 5), axles (steel rear, aluminum front), titanium cassette body, geometry, and weight are all the same between the two. They come the titanium grey/silver color as pictured. A simpler hub shell, limited colors, and economies of scale afforded by a streamlined purchasing and hand building process is responsible for all of the cost savings.
So, this might work for you. If you just want hubs, than the WI Ti hubs should work.
GH
November says that the WI Ti hubs are just as good as the WI T11 hubs.
Our answer to riders' high performance alloy wheel challenge is to begin with our November Nimbus Ti hubs, manufactured by White Industries. Their most important features are shared directly with the T11: bearings (Enduro-made ABEC 5), axles (steel rear, aluminum front), titanium cassette body, geometry, and weight are all the same between the two. They come the titanium grey/silver color as pictured. A simpler hub shell, limited colors, and economies of scale afforded by a streamlined purchasing and hand building process is responsible for all of the cost savings.
So, this might work for you. If you just want hubs, than the WI Ti hubs should work.
GH
#12
Senior Member
For $60 you can buy a pair of lower end but decent Shimano hubs. I have an older pair of these that have lasted many years. I can't remember doing any maintenance on them.
Amazon.com : Shimano Front Mountain Bicycle Hub - HB-M525 : Sports & Outdoors
Amazon.com : Shimano Front Mountain Bicycle Hub - HB-M525 : Sports & Outdoors
#13
Senior Member
Thread Starter
Join Date: Feb 2013
Location: Midwest USA
Posts: 61
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Recommending cup and cone hubs are really unrelated to the discussion of this thread. I am hoping to move away from cup and cones and lock in with hubs that use cartridge bearings. Chances are you'll -always- be able to find cartridge bearings of the appropriate size used in a bicycle hub. Not only does this mean that you can get fresh and new races/bearings and so on all at once, but it likely means virtually immortal serviceability.