For the love of English 3 speeds...
Senior Member
Join Date: Apr 2012
Location: Toronto
Posts: 2,572
Bikes: 1971 Hercules, 1978 Raleigh Superbe, 1978 Raleigh Tourist, 1964 Glider 3 Speed, 1967 Raleigh Sprite 5 Speed, 1968 Hercules AMF 3 Speed, 1972 Raleigh Superbe, 1976 Raleigh Superbe, 1957 Flying Pigeon, 1967 Dunelt 3 Speed
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1028 Post(s)
Liked 443 Times
in
288 Posts
The nice thing about using an early 70s SuperCourse for such a conversion is that they don't have a derailleur hanger and are spaced at 120mm in the rear triangle, so a 3-speed hub with a 6 1/4" axle will fit without serious modification. Running cable stops and pulley wheels can be a bit fiddly, but quite do-able. Last weekend I had my '73 SuperCourse equipped with a 5-speed rear hub out for a 30 miler.
Senior Member
Join Date: Apr 2012
Location: Toronto
Posts: 2,572
Bikes: 1971 Hercules, 1978 Raleigh Superbe, 1978 Raleigh Tourist, 1964 Glider 3 Speed, 1967 Raleigh Sprite 5 Speed, 1968 Hercules AMF 3 Speed, 1972 Raleigh Superbe, 1976 Raleigh Superbe, 1957 Flying Pigeon, 1967 Dunelt 3 Speed
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1028 Post(s)
Liked 443 Times
in
288 Posts
gster knows alot about these English 3 speeds....wondering, have you ever run across a Sturmey Archer 4 speed ? ....my friend had a 1953 Indian Scout so equiped...the additional speed was labeled "B" just below Low.(#1)
....my Indian had the conventional S/A 3 speed. Both of our cycles were imported by the Indian Motorcycle dealer in Toledo, Ohio...we bought them new, in the crate.
Julius in Ohio
....my Indian had the conventional S/A 3 speed. Both of our cycles were imported by the Indian Motorcycle dealer in Toledo, Ohio...we bought them new, in the crate.
Julius in Ohio
They were re branded Phillips bicycles
https://threespeedmania.wordpress.co...dian-3-speeds/
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
gster knows alot about these English 3 speeds....wondering, have you ever run across a Sturmey Archer 4 speed ? ....my friend had a 1953 Indian Scout so equiped...the additional speed was labeled "B" just below Low.(#1)
....my Indian had the conventional S/A 3 speed. Both of our cycles were imported by the Indian Motorcycle dealer in Toledo, Ohio...we bought them new, in the crate.
Julius in Ohio
....my Indian had the conventional S/A 3 speed. Both of our cycles were imported by the Indian Motorcycle dealer in Toledo, Ohio...we bought them new, in the crate.
Julius in Ohio
__________________
Inflate Hard
Inflate Hard
Senior Member
Join Date: Apr 2019
Location: N,W. Ohio
Posts: 75
Bikes: 1972 Raleigh Tourist
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 27 Post(s)
Likes: 0
Liked 14 Times
in
10 Posts
I've never seen a 4 speed hub, but I know about those Indian Scouts.
They were re branded Phillips bicycles
https://threespeedmania.wordpress.co...dian-3-speeds/
They were re branded Phillips bicycles
https://threespeedmania.wordpress.co...dian-3-speeds/
all the best, Julius in Ohio
Senior Member
Join Date: Apr 2019
Location: N,W. Ohio
Posts: 75
Bikes: 1972 Raleigh Tourist
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 27 Post(s)
Likes: 0
Liked 14 Times
in
10 Posts
Sturmey Archer made plenty of 4 speeds. Mostly they were used on the higher end club style bikes. Roadsters were usually 3 speeds. From the late 40s till around 1955, all the trigger shifters were made to work on both 3 and 4 speed hubs, so you'll see older 3 speed roadsters with shifters marked 3 or 4 speed.
It had drop handlebars. Sturmey Archer gears, Celluloid Fenders, rat trap pedals and 27 x 1 1/4 gum tyres...very light weight. The owner used to do 100 milers on weekends...needless to say we were impressed.
Julius in Ohio
Senior Member
Join Date: Apr 2012
Location: Toronto
Posts: 2,572
Bikes: 1971 Hercules, 1978 Raleigh Superbe, 1978 Raleigh Tourist, 1964 Glider 3 Speed, 1967 Raleigh Sprite 5 Speed, 1968 Hercules AMF 3 Speed, 1972 Raleigh Superbe, 1976 Raleigh Superbe, 1957 Flying Pigeon, 1967 Dunelt 3 Speed
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1028 Post(s)
Liked 443 Times
in
288 Posts
gster knows alot about these English 3 speeds....wondering, have you ever run across a Sturmey Archer 4 speed ? ....my friend had a 1953 Indian Scout so equiped...the additional speed was labeled "B" just below Low.(#1)
....my Indian had the conventional S/A 3 speed. Both of our cycles were imported by the Indian Motorcycle dealer in Toledo, Ohio...we bought them new, in the crate.
Julius in Ohio
....my Indian had the conventional S/A 3 speed. Both of our cycles were imported by the Indian Motorcycle dealer in Toledo, Ohio...we bought them new, in the crate.
Julius in Ohio
They were re branded Phillips bicycles
https://threespeedmania.wordpress.co...dian-3-speeds/
Senior Member
Join Date: Mar 2012
Location: Port Dover Ontario Canada
Posts: 1,544
Bikes: 1965 Dilecta Le Blanc, 1956 Royal Nord, 1972 Raleigh Sports, 1972 CCM Turismo,1976 SuperCycle Excalibur, 2014 Salsa Vaya, 2017 Felt DD70, 2019 Giant Lafree and others
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 351 Post(s)
Liked 597 Times
in
229 Posts
Although cool and grey yesterday, I took the opportunity to take a first ride on the just completed Royal Nord President (Belgian) with its English Brampton 3 speed setup (as original). To those contemplating using a 3 speed drivetrain on a lighter, quality frame, with alloy components, I say "go for it!" Weighing 12.5 lbs less than my DL1 Roadster with a 531SG frame, alloy 700-38C wheels and fairly light Pasela PT tires it feels like a racing machine. It has the raked forks and smooth ride but feels connected and sporty and less vague. The 17T cog is too high but is threaded and I have not yet found a bigger replacement.
__________________
We are what we reflect. We are the changes that we bring to this world. Ride often. -Geo.-
We are what we reflect. We are the changes that we bring to this world. Ride often. -Geo.-
Senior Member
Join Date: Apr 2012
Location: Toronto
Posts: 2,572
Bikes: 1971 Hercules, 1978 Raleigh Superbe, 1978 Raleigh Tourist, 1964 Glider 3 Speed, 1967 Raleigh Sprite 5 Speed, 1968 Hercules AMF 3 Speed, 1972 Raleigh Superbe, 1976 Raleigh Superbe, 1957 Flying Pigeon, 1967 Dunelt 3 Speed
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1028 Post(s)
Liked 443 Times
in
288 Posts
Although cool and grey yesterday, I took the opportunity to take a first ride on the just completed Royal Nord President (Belgian) with its English Brampton 3 speed setup (as original). To those contemplating using a 3 speed drivetrain on a lighter, quality frame, with alloy components, I say "go for it!" Weighing 12.5 lbs less than my DL1 Roadster with a 531SG frame, alloy 700-38C wheels and fairly light Pasela PT tires it feels like a racing machine. It has the raked forks and smooth ride but feels connected and sporty and less vague. The 17T cog is too high but is threaded and I have not yet found a bigger replacement.
How much do you think you've spent,
excluding labour, of course ?
Senior Member
Join Date: Mar 2012
Location: Port Dover Ontario Canada
Posts: 1,544
Bikes: 1965 Dilecta Le Blanc, 1956 Royal Nord, 1972 Raleigh Sports, 1972 CCM Turismo,1976 SuperCycle Excalibur, 2014 Salsa Vaya, 2017 Felt DD70, 2019 Giant Lafree and others
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 351 Post(s)
Liked 597 Times
in
229 Posts
Estimates as follows:
Bike $280
Saddle $150
Tires $100
Grips $10
Cables $40
Pedals $60
Bearings etc. $10
Hand painted details Priceless!
Grand Total $ 650.00
I have set a new personal record on a single vintage bike. It seems like a lot of money, but I was at the LBS yesterday and I could not buy much with that.
__________________
We are what we reflect. We are the changes that we bring to this world. Ride often. -Geo.-
We are what we reflect. We are the changes that we bring to this world. Ride often. -Geo.-
Senior Member
Join Date: Dec 2005
Posts: 17,158
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3810 Post(s)
Liked 6,702 Times
in
2,612 Posts
Although cool and grey yesterday, I took the opportunity to take a first ride on the just completed Royal Nord President (Belgian) with its English Brampton 3 speed setup (as original). To those contemplating using a 3 speed drivetrain on a lighter, quality frame, with alloy components, I say "go for it!" Weighing 12.5 lbs less than my DL1 Roadster with a 531SG frame, alloy 700-38C wheels and fairly light Pasela PT tires it feels like a racing machine. It has the raked forks and smooth ride but feels connected and sporty and less vague. The 17T cog is too high but is threaded and I have not yet found a bigger replacement.
Likes For nlerner:
Senior Member
Join Date: Apr 2012
Location: Toronto
Posts: 2,572
Bikes: 1971 Hercules, 1978 Raleigh Superbe, 1978 Raleigh Tourist, 1964 Glider 3 Speed, 1967 Raleigh Sprite 5 Speed, 1968 Hercules AMF 3 Speed, 1972 Raleigh Superbe, 1976 Raleigh Superbe, 1957 Flying Pigeon, 1967 Dunelt 3 Speed
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1028 Post(s)
Liked 443 Times
in
288 Posts
Why did you have to ask that question? I was having a nice day!
Estimates as follows:
Bike $280
Saddle $150
Tires $100
Grips $10
Cables $40
Pedals $60
Bearings etc. $10
Hand painted details Priceless!
Grand Total $ 650.00
I have set a new personal record on a single vintage bike. It seems like a lot of money, but I was at the LBS yesterday and I could not buy much with that.
Estimates as follows:
Bike $280
Saddle $150
Tires $100
Grips $10
Cables $40
Pedals $60
Bearings etc. $10
Hand painted details Priceless!
Grand Total $ 650.00
I have set a new personal record on a single vintage bike. It seems like a lot of money, but I was at the LBS yesterday and I could not buy much with that.
I can see how much attention
has been applied to this one.
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
Although cool and grey yesterday, I took the opportunity to take a first ride on the just completed Royal Nord President (Belgian) with its English Brampton 3 speed setup (as original). To those contemplating using a 3 speed drivetrain on a lighter, quality frame, with alloy components, I say "go for it!" Weighing 12.5 lbs less than my DL1 Roadster with a 531SG frame, alloy 700-38C wheels and fairly light Pasela PT tires it feels like a racing machine. It has the raked forks and smooth ride but feels connected and sporty and less vague. The 17T cog is too high but is threaded and I have not yet found a bigger replacement.
__________________
Inflate Hard
Inflate Hard
Senior Member
Join Date: Mar 2012
Location: Port Dover Ontario Canada
Posts: 1,544
Bikes: 1965 Dilecta Le Blanc, 1956 Royal Nord, 1972 Raleigh Sports, 1972 CCM Turismo,1976 SuperCycle Excalibur, 2014 Salsa Vaya, 2017 Felt DD70, 2019 Giant Lafree and others
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 351 Post(s)
Liked 597 Times
in
229 Posts
Glad you like the Royal Nord, now believed to be around 1956-60. I expect I must have 160hours of fun building this bike. Now I may be selling my coffee 1972 Sports as this makes 3peed #4.
__________________
We are what we reflect. We are the changes that we bring to this world. Ride often. -Geo.-
We are what we reflect. We are the changes that we bring to this world. Ride often. -Geo.-
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
Looks like they only make metallic braided housings. Oh well, looks like I'm back to my project of making them with tube shoe laces. Not that I have an early roadster project going now, but I have been putting up parts for one when it comes along and I'll be needing black braided housings.
__________________
Inflate Hard
Inflate Hard
Senior Member
Join Date: Mar 2018
Location: Brooklyn, NY
Posts: 660
Bikes: 1983 Trek 600, 1972 Raleigh Sports Step Thru, 1963 Rudge Sports, 2007 Dahon MuP8, Dahon Speed, Public Mixte 8-speed IGH, mid-70s Peugeot Mixte AW conversion, Riv Platypus
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 24 Times
in
17 Posts
Why did you have to ask that question? I was having a nice day!
Estimates as follows:
Bike $280
Saddle $150
Tires $100
Grips $10
Cables $40
Pedals $60
Bearings etc. $10
Hand painted details Priceless!
Grand Total $ 650.00
I have set a new personal record on a single vintage bike. It seems like a lot of money, but I was at the LBS yesterday and I could not buy much with that.
Estimates as follows:
Bike $280
Saddle $150
Tires $100
Grips $10
Cables $40
Pedals $60
Bearings etc. $10
Hand painted details Priceless!
Grand Total $ 650.00
I have set a new personal record on a single vintage bike. It seems like a lot of money, but I was at the LBS yesterday and I could not buy much with that.
Full Member
Join Date: Oct 2017
Location: NW Florida
Posts: 389
Bikes: A Few
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 156 Post(s)
Liked 63 Times
in
27 Posts
Looks like they only make metallic braided housings. Oh well, looks like I'm back to my project of making them with tube shoe laces. Not that I have an early roadster project going now, but I have been putting up parts for one when it comes along and I'll be needing black braided housings.
https://www.missionbicycle.com/store...-cable-housing
Senior Member
Join Date: Apr 2012
Location: Toronto
Posts: 2,572
Bikes: 1971 Hercules, 1978 Raleigh Superbe, 1978 Raleigh Tourist, 1964 Glider 3 Speed, 1967 Raleigh Sprite 5 Speed, 1968 Hercules AMF 3 Speed, 1972 Raleigh Superbe, 1976 Raleigh Superbe, 1957 Flying Pigeon, 1967 Dunelt 3 Speed
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1028 Post(s)
Liked 443 Times
in
288 Posts
Here's a one owner Superbe for sale in Toronto.
Complete
Nice chrome
Pump, saddlebag and key
$225.00
Complete
Nice chrome
Pump, saddlebag and key
$225.00
Likes For gster:
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,878
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1858 Post(s)
Liked 664 Times
in
506 Posts
I've posted this before but it seems appropriate since it's a Canadian bike. The left side column of the Rim Chart shows the English sizes, of which there's two 28 x 1 1/4. One of them is a 630 mm/27" K2 which is easy enough to find. The next is an Endrick rim called an EA2 (sorry I said EA4, another obsolete size). This EA2 has the 80 inch bead circumference and is the equivalent to a 647 mm bead. The problem is that if and when you find these tires, they are always rotted out. I think real rubber didn't last long. This (your) Gold Medal is from the 50's however and just maybe, they did a run of these tires with a more modern compound. I seriously think there's a number of collectors on Vintage CCM that would pay well for this wheelset if it's the larger size.
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,054 Times
in
1,254 Posts
The rim chart is rather amazing. Two of the rows in the "rim" column identify a rim "K2 27 x 1 1/4" with a circumference around 77.92 (actually 77.89) inches. This is the designator on my 1952 or so Dunlop Special Lightweight 27 x 1 1/4 rims, which take modern wire bead 630 x 32 mm. But the tire designator on the left-hand side says 28"!
Bloody run on sentence that tries too hard.
Last edited by clubman; 05-12-19 at 01:10 PM.
Senior Member
Join Date: May 2011
Location: Seattle WA
Posts: 2,841
Bikes: 2009 Handsome Devil, 1987 Trek 520 Cirrus, 1978 Motobecane Grand Touring, 1987 Nishiki Cresta GT, 1989 Specialized Allez Former bikes; 1986 Miyata Trail Runner, 1979 Miyata 912, 2011 VO Rando, 1999 Cannondale R800, 1986 Schwinn Passage
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 796 Post(s)
Liked 522 Times
in
367 Posts
Although cool and grey yesterday, I took the opportunity to take a first ride on the just completed Royal Nord President (Belgian) with its English Brampton 3 speed setup (as original). To those contemplating using a 3 speed drivetrain on a lighter, quality frame, with alloy components, I say "go for it!" Weighing 12.5 lbs less than my DL1 Roadster with a 531SG frame, alloy 700-38C wheels and fairly light Pasela PT tires it feels like a racing machine. It has the raked forks and smooth ride but feels connected and sporty and less vague. The 17T cog is too high but is threaded and I have not yet found a bigger replacement.
Senior Member
Join Date: Apr 2012
Location: Toronto
Posts: 2,572
Bikes: 1971 Hercules, 1978 Raleigh Superbe, 1978 Raleigh Tourist, 1964 Glider 3 Speed, 1967 Raleigh Sprite 5 Speed, 1968 Hercules AMF 3 Speed, 1972 Raleigh Superbe, 1976 Raleigh Superbe, 1957 Flying Pigeon, 1967 Dunelt 3 Speed
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1028 Post(s)
Liked 443 Times
in
288 Posts
The rim chart is rather amazing. Two of the rows in the "rim" column identify a rim "K2 27 x 1 1/4" with a circumference around 77.92 (actually 77.89) inches. This is the designator on my 1952 or so Dunlop Special Lightweight 27 x 1 1/4 rims, which take modern wire bead 630 x 32 mm. But the tire designator on the left-hand side says 28"!
NOS Kendas 27" x 1 1/2" 37-630
they have an old style block tread and look appropriate.
Old tires were Dunlop Speedsters @ 28" x 1 1/4" (Canadian size..)
I re used one original Dunlop tube
Senior Member
Join Date: Mar 2018
Location: Brooklyn, NY
Posts: 660
Bikes: 1983 Trek 600, 1972 Raleigh Sports Step Thru, 1963 Rudge Sports, 2007 Dahon MuP8, Dahon Speed, Public Mixte 8-speed IGH, mid-70s Peugeot Mixte AW conversion, Riv Platypus
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 24 Times
in
17 Posts
Although cool and grey yesterday, I took the opportunity to take a first ride on the just completed Royal Nord President (Belgian) with its English Brampton 3 speed setup (as original). To those contemplating using a 3 speed drivetrain on a lighter, quality frame, with alloy components, I say "go for it!" Weighing 12.5 lbs less than my DL1 Roadster with a 531SG frame, alloy 700-38C wheels and fairly light Pasela PT tires it feels like a racing machine. It has the raked forks and smooth ride but feels connected and sporty and less vague. The 17T cog is too high but is threaded and I have not yet found a bigger replacement.
Senior Member
Join Date: Jul 2009
Location: Boston, MA
Posts: 1,541
Bikes: Bianchi Volpe, ANT 3-speed roadster, New Albion Privateer singlespeed, Raleigh One Way singlespeed, Raleigh Professional "retro roadie" rebuild, 198? Fuji(?) franken-5-speed, 1937 Raleigh Tourist, 1952 Raleigh Sports, 1966 Raleigh Sports step-through
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 248 Post(s)
Liked 27 Times
in
18 Posts
Senior Member
Join Date: Mar 2012
Location: Port Dover Ontario Canada
Posts: 1,544
Bikes: 1965 Dilecta Le Blanc, 1956 Royal Nord, 1972 Raleigh Sports, 1972 CCM Turismo,1976 SuperCycle Excalibur, 2014 Salsa Vaya, 2017 Felt DD70, 2019 Giant Lafree and others
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 351 Post(s)
Liked 597 Times
in
229 Posts
@agmetal is correct. SG is a common abbreviation for straight gauge instead of the lighter butted or double butted tubing.
__________________
We are what we reflect. We are the changes that we bring to this world. Ride often. -Geo.-
We are what we reflect. We are the changes that we bring to this world. Ride often. -Geo.-
Senior Member
Join Date: Mar 2018
Location: Brooklyn, NY
Posts: 660
Bikes: 1983 Trek 600, 1972 Raleigh Sports Step Thru, 1963 Rudge Sports, 2007 Dahon MuP8, Dahon Speed, Public Mixte 8-speed IGH, mid-70s Peugeot Mixte AW conversion, Riv Platypus
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 24 Times
in
17 Posts
@agmetal is correct. SG is a common abbreviation for straight gauge instead of the lighter butted or double butted tubing.