Front-end instability
#1
Junior Member
Thread Starter
Join Date: Sep 2019
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Front-end instability
I just bought a Electra Cruiser 7 , the front end to me seems very unstable is there anything I can do to improve that, I am new at this
#2
Senior Member
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,927
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1819 Post(s)
Liked 1,694 Times
in
975 Posts
First thing I would do is to check tire inflation, both front and rear. Next, I would check headset adjustment. A too loose or too tight headset can make a bike difficult to control. Is this a new bike? The dealer should be able to check it over for you
Last edited by alcjphil; 10-01-19 at 01:46 PM.
#3
Senior Member
Join Date: May 2010
Location: Bristol, R. I.
Posts: 4,340
Bikes: Specialized Secteur, old Peugeot
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 663 Post(s)
Liked 496 Times
in
299 Posts
When I first got my bike, I found it pulled to the left. After pondering this tendency for a while, I measured the alignment of the wheels using a string from front to back wheels. I found that they were misaligned. Further investigation showed that the front wheel dropouts were not inserted into the forks the same amount. The result of this was to throw the wheel out of plumb so that at the point of contact with the road, the wheel was a cm or so to the left. This was easily fixed by filing the dropout with a round file. The geometry of the wheel is such that if the axle is off by, say one mm, the wheel at the rim will be off by about four mm. It took longer to think about the problem than to fix it.
#4
Senior Member
Join Date: Aug 2019
Location: Québec, Canada
Posts: 2,114
Bikes: SL8 Pro, TCR beater
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 989 Post(s)
Liked 586 Times
in
440 Posts
What do you mean unstable? Your post requires a little more details...
Improper inflation, loose headset, loose spokes, warped wheel, etc.
Improper inflation, loose headset, loose spokes, warped wheel, etc.
Likes For eduskator:
#5
Junior Member
Thread Starter
Join Date: Sep 2019
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
yes it's a new bike and I've been back to the dealer three times the first time the son of the owner told me that is not enough dirt in the bearings yet give it time the owner checked it out for the head being too loose it's okay and he finally told me that he thinks that I'm . Oversteering
#6
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,292
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8280 Post(s)
Liked 9,046 Times
in
4,477 Posts
Maybe it's your fit/position on the bike? Should have your elbows bent, be relaxed, look ahead where you want to go, not where you don't want to go.
#9
Senior Member
Join Date: Aug 2007
Posts: 2,595
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 608 Post(s)
Liked 352 Times
in
225 Posts
Your question may be better suited here in Beach Cruisers.
With that said, your description is exactly what I expect that bike to do. Long front end, high handlebars, seat way behind the crank. It is like a motorcycle chopper, the front wheel is going to flop. Hopefully you will get use to it.
With that said, your description is exactly what I expect that bike to do. Long front end, high handlebars, seat way behind the crank. It is like a motorcycle chopper, the front wheel is going to flop. Hopefully you will get use to it.
#10
Senior Member
Your question may be better suited here in Beach Cruisers.
With that said, your description is exactly what I expect that bike to do. Long front end, high handlebars, seat way behind the crank. It is like a motorcycle chopper, the front wheel is going to flop. Hopefully you will get use to it.
With that said, your description is exactly what I expect that bike to do. Long front end, high handlebars, seat way behind the crank. It is like a motorcycle chopper, the front wheel is going to flop. Hopefully you will get use to it.
You'll most likely get used to, but don't expect to be railing corners anytime soon.
#11
• —
Join Date: Jun 2015
Location: Land of Pleasant Living
Posts: 12,240
Bikes: Shmikes
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 10170 Post(s)
Liked 5,863 Times
in
3,155 Posts
See above.
#18
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,636
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4735 Post(s)
Liked 1,532 Times
in
1,003 Posts