Addiction LXXVIII
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 17,962
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10425 Post(s)
Liked 11,899 Times
in
6,094 Posts
Another thing to know about the Hwy 1s - there's no flare to the drops, which makes old second generation Ergo levers feel like the brake levers are almost pointed inward. Not a big problem and I got used to it within minutes. But it will probably feels strange going from the R7000 105s on the Canyon to these and back. If you're putting 105s on Hwy 1s, the outward pointing levers will probably feel fine.
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
Likes For genejockey:
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 17,962
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10425 Post(s)
Liked 11,899 Times
in
6,094 Posts
But if you don't mind my asking, how do you get the tires through the brakes?
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 44,842
Bikes: everywhere
Mentioned: 71 Post(s)
Tagged: 1 Thread(s)
Quoted: 12771 Post(s)
Liked 7,687 Times
in
4,081 Posts
They slide in fairly easily at 25 psi, takes a little coaxing at 40psi. Would be even easier if I'd reset the caliper width to the width of these rims so that I could release the calipers, but some other day
Senior Member
Join Date: Aug 2010
Location: WNY
Posts: 3,100
Bikes: Factor O2, Caad10, Caad2
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 365 Post(s)
Liked 122 Times
in
78 Posts
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 17,962
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10425 Post(s)
Liked 11,899 Times
in
6,094 Posts
Hmmm. Maybe I'll see if the 28s can be fitted to the Battaglin that way. The old Ergo levers don't give you a lot of opening. I figure there's MAYBE 5mm chainstay clearance on each side with 25s, but the wheel has to be PERFECTLY aligned. The front's no problem - ever seen a MAX fork crown?
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 44,842
Bikes: everywhere
Mentioned: 71 Post(s)
Tagged: 1 Thread(s)
Quoted: 12771 Post(s)
Liked 7,687 Times
in
4,081 Posts
The bridge timbers are likely wood.
Think this is the bridge:
https://www.google.com/maps/place/Te...4d-111.9276565
The relatively new, double track bridge to the right is the light rail line.
Think this is the bridge:
https://www.google.com/maps/place/Te...4d-111.9276565
The relatively new, double track bridge to the right is the light rail line.
And yep, that's the light rail to the east, I've ridden those rails a few times.
Administrator
Thread Starter
Join Date: Apr 2005
Location: Hudson Valley, NY
Posts: 33,001
Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92
Mentioned: 325 Post(s)
Tagged: 2 Thread(s)
Quoted: 11969 Post(s)
Liked 6,646 Times
in
3,483 Posts
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
Senior Member
Join Date: Jan 2010
Posts: 39,238
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18415 Post(s)
Liked 15,545 Times
in
7,329 Posts
The bridge that became the Walkway over the Hudson, in Mr. D’s neck of the woods, was torched by vandals. Think it was in ‘73. I’ve ridden across it twice. Quite nice.
So it is
Join Date: Sep 2008
Location: Westminster, CO
Posts: 21,348
Bikes: Luzerne, 684, Boreas, Wheelhouse, Alize©®, Bayamo, Cayo
Mentioned: 246 Post(s)
Tagged: 1 Thread(s)
Quoted: 11401 Post(s)
Liked 4,758 Times
in
2,767 Posts
Stick-On Cheaters. Whoda thunk.
• —
Join Date: Jun 2015
Location: Land of Pleasant Living
Posts: 12,234
Bikes: Shmikes
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 10167 Post(s)
Liked 5,862 Times
in
3,155 Posts
serious cyclist
Join Date: Apr 2009
Location: Austin
Posts: 21,147
Bikes: S1, R2, P2
Mentioned: 115 Post(s)
Tagged: 1 Thread(s)
Quoted: 9334 Post(s)
Liked 3,679 Times
in
2,026 Posts
Whelp, ordered up new windows to hopefully help with the noise issue. Think the current ones weren't doing much in that department.
smelling the roses
Join Date: Nov 2010
Location: Tixkokob, Yucatán, México
Posts: 15,320
Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5
Mentioned: 104 Post(s)
Tagged: 1 Thread(s)
Quoted: 7081 Post(s)
Liked 901 Times
in
612 Posts
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 17,962
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10425 Post(s)
Liked 11,899 Times
in
6,094 Posts
It went great, till I got to the bend. For a while, I was afraid I was just plain stuck. I think these are more square, that is the tops are longer and straighter before the bend, so it's more acute. If I had my druthers, I'd have used the 3T Motus, if the clamp part hadn't cracked.
Now I have to thread one end of the bar through the Ritchey stem I took off it because the black Salsa stem looked better with the rest of the bike. And rewrap the bar.
Poop.
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
smelling the roses
Join Date: Nov 2010
Location: Tixkokob, Yucatán, México
Posts: 15,320
Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5
Mentioned: 104 Post(s)
Tagged: 1 Thread(s)
Quoted: 7081 Post(s)
Liked 901 Times
in
612 Posts
A positive side to the cut off finger presented itself this afternoon. My DeWalt drill driver slipped off the screw and poked a hole through the base of my fingernail, drawing blood. I hardly felt it.
Likes For seedsbelize:
serious cyclist
Join Date: Apr 2009
Location: Austin
Posts: 21,147
Bikes: S1, R2, P2
Mentioned: 115 Post(s)
Tagged: 1 Thread(s)
Quoted: 9334 Post(s)
Liked 3,679 Times
in
2,026 Posts
Likes For Bah Humbug:
Silver Comet Fred
Join Date: Jan 2017
Location: NW Metro Atl.
Posts: 12,068
Bikes: 1
Mentioned: 145 Post(s)
Tagged: 2 Thread(s)
Quoted: 8835 Post(s)
Liked 2,986 Times
in
1,736 Posts
I spent 7 hours on Saturday, refitting my Battaglin MAX bike. New cables, new rear derailleur, new cassette, new tires, new handlebar, new bar tape. It took so long because I was trying to make a short cage Centaur derailleur work rather than swap in the medium cage Veloce I'd bought for the job. So after a lot of time spent fruitlessly, I swapped in the Veloce and voila! It works. Now I'm running 53/39 and 12-30.
The frame is so old, it doesn't take a regular cable guide under the BB. No, it's got a plate with two holes in it. And for years, I've been tolerating the sub-optimal shifting from all the added friction it causes. I threaded some shift cable liner through the holes, and fed the cables through that, heavily greased.
New bar, because the Cinelli Nerve I had on it is 1) real old, and 2) a LO--O-ONG way down to the drops, compared with what The Cool Kids are using these days. I used a SOMA Highway One, which is the right shape, and unlike nearly every other bar, it comes in 26.0 and silver. Finished it all off with white Fizik tape. Even got some white gloves just for this bike, so I don't foul the tape as quickly.
I thought about getting 28s, but the 25s I've been running barley fit though the calipers as it is. And the chainstays are pretty close to the tires. SO instead I just replaced the old Ultra Sports with new GP's, pumped to 100/105.
Today was the 'shakedown cruise'. The new bar fits well, in fact it might need to drop a cm or so - at the same stem height, I feel more upright. Or maybe turn the bar down a hair. Shifting was MUCH better! AND the 30 works well! And I think that the tires made a big difference, even though they're the same size at the same pressure. Felt much less rattly. I'm in love all over again!
The frame is so old, it doesn't take a regular cable guide under the BB. No, it's got a plate with two holes in it. And for years, I've been tolerating the sub-optimal shifting from all the added friction it causes. I threaded some shift cable liner through the holes, and fed the cables through that, heavily greased.
New bar, because the Cinelli Nerve I had on it is 1) real old, and 2) a LO--O-ONG way down to the drops, compared with what The Cool Kids are using these days. I used a SOMA Highway One, which is the right shape, and unlike nearly every other bar, it comes in 26.0 and silver. Finished it all off with white Fizik tape. Even got some white gloves just for this bike, so I don't foul the tape as quickly.
I thought about getting 28s, but the 25s I've been running barley fit though the calipers as it is. And the chainstays are pretty close to the tires. SO instead I just replaced the old Ultra Sports with new GP's, pumped to 100/105.
Today was the 'shakedown cruise'. The new bar fits well, in fact it might need to drop a cm or so - at the same stem height, I feel more upright. Or maybe turn the bar down a hair. Shifting was MUCH better! AND the 30 works well! And I think that the tires made a big difference, even though they're the same size at the same pressure. Felt much less rattly. I'm in love all over again!
Likes For DougRNS:
Silver Comet Fred
Join Date: Jan 2017
Location: NW Metro Atl.
Posts: 12,068
Bikes: 1
Mentioned: 145 Post(s)
Tagged: 2 Thread(s)
Quoted: 8835 Post(s)
Liked 2,986 Times
in
1,736 Posts
Silver Comet Fred
Join Date: Jan 2017
Location: NW Metro Atl.
Posts: 12,068
Bikes: 1
Mentioned: 145 Post(s)
Tagged: 2 Thread(s)
Quoted: 8835 Post(s)
Liked 2,986 Times
in
1,736 Posts
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 44,842
Bikes: everywhere
Mentioned: 71 Post(s)
Tagged: 1 Thread(s)
Quoted: 12771 Post(s)
Liked 7,687 Times
in
4,081 Posts
We've had these paper towels for weeks, and I just now noticed they've got bikes on 'em. Weird.
Likes For LesterOfPuppets:
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 44,842
Bikes: everywhere
Mentioned: 71 Post(s)
Tagged: 1 Thread(s)
Quoted: 12771 Post(s)
Liked 7,687 Times
in
4,081 Posts
In other weird news.
No. Not even gonna try it.
No. Not even gonna try it.
Silver Comet Fred
Join Date: Jan 2017
Location: NW Metro Atl.
Posts: 12,068
Bikes: 1
Mentioned: 145 Post(s)
Tagged: 2 Thread(s)
Quoted: 8835 Post(s)
Liked 2,986 Times
in
1,736 Posts
Administrator
Thread Starter
Join Date: Apr 2005
Location: Hudson Valley, NY
Posts: 33,001
Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92
Mentioned: 325 Post(s)
Tagged: 2 Thread(s)
Quoted: 11969 Post(s)
Liked 6,646 Times
in
3,483 Posts
Yup.
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
Administrator
Thread Starter
Join Date: Apr 2005
Location: Hudson Valley, NY
Posts: 33,001
Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92
Mentioned: 325 Post(s)
Tagged: 2 Thread(s)
Quoted: 11969 Post(s)
Liked 6,646 Times
in
3,483 Posts
Look, forget about it, you’d have to damn near kill yourself in order to catch up with trainsnorter.
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
Likes For BillyD:
Super Modest
Join Date: Jun 2002
Location: Central Illinois
Posts: 23,466
Bikes: Trek Emonda, Giant Propel, Colnago V3, Co-Motion Supremo, ICE VTX WC
Mentioned: 107 Post(s)
Tagged: 1 Thread(s)
Quoted: 10963 Post(s)
Liked 4,620 Times
in
2,123 Posts
I’ve got a gash on my left shin at the moment and have no idea where or how or when it happened.
__________________
Keep the chain tight!
serious cyclist
Join Date: Apr 2009
Location: Austin
Posts: 21,147
Bikes: S1, R2, P2
Mentioned: 115 Post(s)
Tagged: 1 Thread(s)
Quoted: 9334 Post(s)
Liked 3,679 Times
in
2,026 Posts