Could have used one of these 60 years ago!
#1
Full Member
Thread Starter
Could have used one of these 60 years ago!
My buddies and me were always doing Wheelies.
Too bad I went too far sometimes , and landed on my rear end way too often!
Too bad I went too far sometimes , and landed on my rear end way too often!
Likes For roadsnakes:
#2
Senior Member
Join Date: Aug 2017
Location: Minneapolis
Posts: 936
Bikes: 1968 Raleigh Super Course, 1972 Raleigh Professional, 1975 Raleigh International, 1978 Raleigh Professional, 1985 Raleigh Prestige, 1972 Schwinn Paramount, 1980 Schwinn Voyageur 11.8, 1960 Carlton Franco Suisse Peugeot PX10, 1972 Motobecane Le Champ
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 323 Post(s)
Liked 690 Times
in
351 Posts
An excellent ad! I had a Sears Spyder bike from the 70s go through my hands three years ago. The bike is kind of a Schwinn Krate knock-off. I was 43 at the time and when I took a look at it, I simply couldn’t resist a wheelie attempt. It started out okay but after four or five pedal stokes I just couldn’t hold it. Of course I fell backwards. I don’t think I’d tried popping a wheelie in about 25 or 30 years. I was lucky not to hurt myself too badly (other than my pride) and I got wheelie bug out of my system. I’d say I’ll never attempt another wheelie, but if I ever happen to acquire a bike with a wheelie bar attached, well....
Last edited by Pcampeau; 07-10-21 at 11:58 AM.
#3
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,055 Times
in
1,255 Posts
No lawsuits waiting to happen there!
#4
Senior Member
Join Date: Feb 2020
Posts: 1,060
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 529 Post(s)
Likes: 0
Liked 255 Times
in
185 Posts
I have never seen training wheels like in the video. A lot of people on this forum are young, and don't know what really did happen back then, So let's share.
It was cool to extend forks on a bicycle. A lot of people did this.
With the front of the bike up high already, it was easy to do wheelies. That is lift the front wheel off the ground, and ride on the back wheel. People did it by balancing, not with training wheels.
These bicycles, like shown in the video were a thing, or a fad, back in the 1970s.
A lot of bikes back then had the brake in the rear hub. You applied the brakes by peddling backwards.
It was cool to extend forks on a bicycle. A lot of people did this.
With the front of the bike up high already, it was easy to do wheelies. That is lift the front wheel off the ground, and ride on the back wheel. People did it by balancing, not with training wheels.
These bicycles, like shown in the video were a thing, or a fad, back in the 1970s.
A lot of bikes back then had the brake in the rear hub. You applied the brakes by peddling backwards.
#5
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,860
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,928 Times
in
1,493 Posts
I don’t think I’ve ever seen one of those.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#6
Full Member
Thread Starter
When I was around 10-11years old I actually took two lengths of conduit type pipe, pounded them onto to the forks of my brothers "Sting Ray" type bike.
The other ends I had pounded flat with a hammer, and drilled holes to attach the front wheel! LOL
I thought it looked cool, but there wasn`t much weight on that front wheel, so going over any uneven bump on the sidewalk, and that front wheel was in the air whether you wanted it or not!
The other ends I had pounded flat with a hammer, and drilled holes to attach the front wheel! LOL
I thought it looked cool, but there wasn`t much weight on that front wheel, so going over any uneven bump on the sidewalk, and that front wheel was in the air whether you wanted it or not!
#7
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,496
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 583 Post(s)
Liked 699 Times
in
394 Posts
When I was around 10-11years old I actually took two lengths of conduit type pipe, pounded them onto to the forks of my brothers "Sting Ray" type bike.
The other ends I had pounded flat with a hammer, and drilled holes to attach the front wheel! LOL
I thought it looked cool, but there wasn`t much weight on that front wheel, so going over any uneven bump on the sidewalk, and that front wheel was in the air whether you wanted it or not!
The other ends I had pounded flat with a hammer, and drilled holes to attach the front wheel! LOL
I thought it looked cool, but there wasn`t much weight on that front wheel, so going over any uneven bump on the sidewalk, and that front wheel was in the air whether you wanted it or not!
Likes For sd5782:
#8
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,802 Times
in
2,286 Posts
Friend of mine had one of those in 7th grade.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#9
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,496
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 583 Post(s)
Liked 699 Times
in
394 Posts
Actually the more common one in my small town was forks from a junk bicycle cut off at the top and then used as the extender legs.
#10
Wood
Join Date: Jun 2009
Location: Beaumont, Tx
Posts: 2,293
Bikes: Raleigh Sports: hers. Vianelli Professional & Bridgestone 300: mine
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 12 Times
in
10 Posts
Wham-o made quite a bit of fun stuff as early as the late 40's. My favorites were the Hula-hoop, Superball & Frisbee.
I never saw a wheelie bar back then. I had my own Sting Ray knockoff in 1966, bought it with money I earned cutting lawns. It could wheelie down the street with no problem.
I never saw a wheelie bar back then. I had my own Sting Ray knockoff in 1966, bought it with money I earned cutting lawns. It could wheelie down the street with no problem.
#11
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,831 Times
in
1,997 Posts
The cool trike was the Mattel X-15 Varoom Cycle recumbent rear wheel steering delta tricycle with seat belt
#12
Tortoise Wins by a Hare!
Join Date: Feb 2006
Location: Looney Tunes, IL
Posts: 7,398
Bikes: Wabi Special FG, Raleigh Roper, Nashbar AL-1, Miyata One Hundred, '70 Schwinn Lemonator and More!!
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1549 Post(s)
Liked 941 Times
in
504 Posts
Back in the 60's Dad brought home a set of these for my brother and I. Mom took one look and made him take 'em back!
No problem, we soon learned how to ride a proper wheelie.
No problem, we soon learned how to ride a proper wheelie.