Wheel build
#1
Newbie
Thread Starter
Join Date: Aug 2020
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Wheel build
I just built my first wheel and noticed the spokes were on the wrong side of the rim(like non-drive side spoke going to a rim hole drilled to the drive side). I dont know if this is an issue, but I would not want to rebuild the wheel. Could you guys tell me if I can just use it? Thanks a lot!
#2
Tortoise Wins by a Hare!
Join Date: Feb 2006
Location: Looney Tunes, IL
Posts: 7,398
Bikes: Wabi Special FG, Raleigh Roper, Nashbar AL-1, Miyata One Hundred, '70 Schwinn Lemonator and More!!
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1549 Post(s)
Liked 941 Times
in
504 Posts
The spokes are now on a higher angle. It might work for a while but won't be as strong. I'd redo it correctly.
Likes For AlmostTrick:
Likes For dabac:
#4
Full Member
If I understand the issue here, you have spokes from left side of hub mating to spoke holes on the opposite side of the rim. This means you have a rim with offset spoke holes. Generally, per Wheelpro and Brandt, spokes should be on same side of rim.
I'm sure others will chime in, but I would disassemble and do it correctly. This may not be a huge problem for the front wheel (just a wild guess here), but is sounds like a problem to me for the rear wheel. \
It really won't take long to disassemble and get it right. Good luck
I'm sure others will chime in, but I would disassemble and do it correctly. This may not be a huge problem for the front wheel (just a wild guess here), but is sounds like a problem to me for the rear wheel. \
It really won't take long to disassemble and get it right. Good luck
#6
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
You knew that was coming didn't you? As soon as I start to wonder and worry about something like that, I have to fix it. If for no other reason, every time that I go on a group ride I can feel everybody else looking at and judging my wheel building skill.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.