Road fork recommendations?
#1
Senior Member
Thread Starter
Road fork recommendations?
I'm looking for a 1.125" threadless fork. Previous one delaminated following an accident. Other than that it was a good fork. Never had any issues with it.
So, any good forks that you guys can recommend? Looking for something inexpensive. Weight is not really an issue. Alloy or carbon steerer tube, no problem. I see a bunch of inexpensive used forks on eBay - are those any good? Also, which brands are inexpensive but also good?
So, any good forks that you guys can recommend? Looking for something inexpensive. Weight is not really an issue. Alloy or carbon steerer tube, no problem. I see a bunch of inexpensive used forks on eBay - are those any good? Also, which brands are inexpensive but also good?
Last edited by Deontologist; 04-27-15 at 10:54 AM.
#2
Senior Member
Join Date: Mar 2015
Location: Ohio
Posts: 1,040
Bikes: S-Works Tarmac, Nashbar CX, Trek 2200 trainer bike, Salsa Casseroll commuter, old school FS MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 31 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
It's not possible to give recommendations on the eBay forks. You're better off with a Nashbar fork than an unknown one.
#3
Senior Member
Join Date: Dec 2009
Location: Houston, TX
Posts: 28,682
Bikes: 1990 Romic Reynolds 531 custom build, Merlin Works CR Ti custom build, super light Workswell 066 custom build
Mentioned: 110 Post(s)
Tagged: 1 Thread(s)
Quoted: 6556 Post(s)
Likes: 0
Liked 58 Times
in
36 Posts
Much like saddles and stems, many road forks show up on ebay after very little use, because they were unsuitable for the original purchaser, e.g. the wrong size after cutting too short by mistake. If you can locate such a "take-off" fork that is the right size for your, you should be able to do very well. Sure you don't want an old, beat up used fork.
The entire line of Ritchey forks is very good value. Their mid-range fork, the Pro is really excellent. You should be able to get a bit better price on the lower Comp model. The top-of-the-line WCS isn't necessary and can be pricey. But if you find one at a good price, that would be a really good deal. Just be sure to match your crown race diameter, your fork rake, and the steerer tube length you need.
The entire line of Ritchey forks is very good value. Their mid-range fork, the Pro is really excellent. You should be able to get a bit better price on the lower Comp model. The top-of-the-line WCS isn't necessary and can be pricey. But if you find one at a good price, that would be a really good deal. Just be sure to match your crown race diameter, your fork rake, and the steerer tube length you need.
#4
Senior Member
Join Date: Oct 2006
Location: Orange County, CA
Posts: 4,770
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 630 Post(s)
Likes: 0
Liked 369 Times
in
206 Posts
Can't go wrong with Enve:
https://fairwheelbikes.com/enve-20-r...ht-p-3664.html
https://fairwheelbikes.com/enve-20-r...ht-p-3664.html
#5
Senior Member
Thread Starter
Much like saddles and stems, many road forks show up on ebay after very little use, because they were unsuitable for the original purchaser, e.g. the wrong size after cutting too short by mistake. If you can locate such a "take-off" fork that is the right size for your, you should be able to do very well. Sure you don't want an old, beat up used fork.
The entire line of Ritchey forks is very good value. Their mid-range fork, the Pro is really excellent. You should be able to get a bit better price on the lower Comp model. The top-of-the-line WCS isn't necessary and can be pricey. But if you find one at a good price, that would be a really good deal. Just be sure to match your crown race diameter, your fork rake, and the steerer tube length you need.
The entire line of Ritchey forks is very good value. Their mid-range fork, the Pro is really excellent. You should be able to get a bit better price on the lower Comp model. The top-of-the-line WCS isn't necessary and can be pricey. But if you find one at a good price, that would be a really good deal. Just be sure to match your crown race diameter, your fork rake, and the steerer tube length you need.