Best Vintage Tire Lever
#1
Senior Member
Thread Starter
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,949
Bikes: A bunch of old bikes and a few new ones
Liked 4,321 Times
in
2,381 Posts
Best Vintage Tire Lever
Best vintage tire lever ever made is the German made Eldi tire lever. It's thin and strong and it's steel. 'Nuff said.
Last edited by bikemig; 08-30-20 at 11:18 AM.
#2
Senior Member
I completely agree!
I've still got a handful of these Eldi levers, and jealously guard them. There are still times when plastic levers can't fit under a really tight tire bead, or aren't stiff enough to lift the bead.
Steve in Peoria
I've still got a handful of these Eldi levers, and jealously guard them. There are still times when plastic levers can't fit under a really tight tire bead, or aren't stiff enough to lift the bead.
Steve in Peoria
#3
Senior Member
Join Date: Mar 2014
Location: City of Angels
Posts: 5,035
Bikes: A few too many
Liked 2,469 Times
in
1,295 Posts
I missed one a few days ago, has anyone tried these?
https://www.ebay.com/itm/3pcs-Bicycle-Cycle-Bike-Mountain-Road-Steel-Tyre-Tire-Levers-Tyre-Bar-Tools-Kit/262867722325?
or these?
https://www.ebay.com/itm/3pcs-Bicycle-Cycle-Bike-Mountain-Road-Steel-Tyre-Tire-Levers-Tyre-Bar-Tools-Kit/262867722325?
or these?
Last edited by xiaoman1; 08-29-20 at 10:16 AM.
#4
Senior Member
Join Date: Feb 2017
Location: Concord, NC
Posts: 740
Bikes: 1984 Bianchi Tipo Corsa, 1985 Cannondale SM600 (24/26)
Liked 398 Times
in
210 Posts
I've got a Wheelsmith that I use (with Kool Stops) on my alloy rims. Seems like I've had it forever.
I also have this "Terrys Made in England" steel lever that I used to use all of time on steel rims when I worked in a Bike Shop a long time ago in a State far, far away.
I also have this "Terrys Made in England" steel lever that I used to use all of time on steel rims when I worked in a Bike Shop a long time ago in a State far, far away.
#5
Senior Member
I kind of like those little ones that come in a MAFAC tool kit.
There was an aluminum tire lever that looked exactly like the ones in post no 3 that was common ~ late 70s. They'd be vintage correct I suppose. I used them during my brief foray into clinchers. Plastic levers go back further than you'd think, though the early ones tended to break.
I can't seem remember what type of levers got most used in the LBS BITD. I think there were a few kinds at hand. The plastic ones I think. Grab another if it breaks.
There was an aluminum tire lever that looked exactly like the ones in post no 3 that was common ~ late 70s. They'd be vintage correct I suppose. I used them during my brief foray into clinchers. Plastic levers go back further than you'd think, though the early ones tended to break.
I can't seem remember what type of levers got most used in the LBS BITD. I think there were a few kinds at hand. The plastic ones I think. Grab another if it breaks.
Last edited by Salamandrine; 08-29-20 at 10:58 AM.
#6
Senior Member
I have to amend my earlier post... I've got some earlier steel tire levers that I like better than my Eldi's. They are a bit smaller than the Eldi version.
edit: here's a shot of the working ends of these levers. The Eldi lever is much blunter, which makes it a bit harder to get under a very tight tire bead (i.e. Continental and some others). I prefer the thinner edge of the unmarked lever. Both are still much better than the plastic tire levers that I have.
(end of edit)
I got these from Cyclo-Pedia back in the 70's, I think. The catalog doesn't offer any hint as to who might have made them...
by comparison, I got my Eldi levers from Rivendell back in the 90's.... which is also a long time ago... <sigh>
Steve in Peoria
(getting old much faster than I expected!)
edit: here's a shot of the working ends of these levers. The Eldi lever is much blunter, which makes it a bit harder to get under a very tight tire bead (i.e. Continental and some others). I prefer the thinner edge of the unmarked lever. Both are still much better than the plastic tire levers that I have.
(end of edit)
I got these from Cyclo-Pedia back in the 70's, I think. The catalog doesn't offer any hint as to who might have made them...
by comparison, I got my Eldi levers from Rivendell back in the 90's.... which is also a long time ago... <sigh>
Steve in Peoria
(getting old much faster than I expected!)
Last edited by steelbikeguy; 08-29-20 at 12:39 PM.
Likes For steelbikeguy:
#7
Senior Member
I stopped using steel levers many years ago after pinching a few too many tubes. Now I'm all about plastic speedsticks and the like. The only thing I use a steel tire lever for is to tighten a crank dustcap.
Likes For nlerner:
#8
Senior Member
I'm with you on that. I never liked steel levers to be honest. Some are OK. I switched to plastic in like 1980.
Likes For Salamandrine:
#9
Bikes are okay, I guess.
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 6,980
Bikes: Waterford Paramount Touring, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT
Liked 2,484 Times
in
1,577 Posts
Terry. Much smoother and better finished.
#10
seņor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,838
Bikes: '70s - '80s Campagnolo
Liked 6,970 Times
in
3,439 Posts
The only thing I use a steel tire lever for is to tighten a crank dustcap.
"Worth more than it's worth"? Does that make sense? That's like saying, "be yourself." How am I not myself?
#12
Likes For jethin:
#13
Senior Member
Thread Starter
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,949
Bikes: A bunch of old bikes and a few new ones
Liked 4,321 Times
in
2,381 Posts
I use a kool stop tire bead jack to mount a tire but I like a quality steel tire lever for prying off a tough tire.
Last edited by bikemig; 08-30-20 at 10:15 AM.
#14
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 25,043
Bikes: Several, mostly not name brands.
Liked 3,675 Times
in
2,077 Posts
#15
Senior Member
Thread Starter
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,949
Bikes: A bunch of old bikes and a few new ones
Liked 4,321 Times
in
2,381 Posts
If you have a set of eldi tire levers lying around, I'd be happy to buy them from you,
But yeah I use a kool stop jack for installing a tire. I still like my steel levers for prying a tough tire off. There's no doubt that plastic tire levers have gotten better over time though if that's your thing. BITD steel ruled the roost for bikes and tire levers.
But yeah I use a kool stop jack for installing a tire. I still like my steel levers for prying a tough tire off. There's no doubt that plastic tire levers have gotten better over time though if that's your thing. BITD steel ruled the roost for bikes and tire levers.
Likes For steve sumner:
#17
Senior Member
The ones that come to mind are Continental tires on Sun or Ambrosio rims.
I'll admit that I've got some Veloflex Master 23mm folding tires that are really tight on Ambrosio rims too. The steel tire levers are my preferred tool for getting under the bead when removing the tube.
Steve in Peoria
#18
Senior Member
Only a fan of metal if matched to an old era correct bike.
Likes For Bikerider007:
#20
seņor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,838
Bikes: '70s - '80s Campagnolo
Liked 6,970 Times
in
3,439 Posts
.
Likes For SurferRosa:
#22
Senior Member
I've got this yellow thing that I bought about 30 years ago. I don't even know the brand as it wore off. It works great for pulling stubborn tires off. I use it in concert with some park copy tire levers that performance used to sell (these are also about 30 years old). The plastic on the yellow thing is kind of crappy and I hate that it always looks chewed up but it works. That koolstop tire bead jack looks neat, kind of like the baja no pinch I've got for changing dirt bike tires.
Likes For Marylander:
#23
Junior Member
Join Date: Aug 2016
Location: SF East Bay
Posts: 101
Bikes: Masi, Olmo, Miele, Masi, Masi
Likes: 0
Liked 34 Times
in
23 Posts
I believe the yellow thing is called a Quik-Stik. They are great for installing really tight rim tire combos. They seem to last a long time too. I bought one off Amazon last year for a friend, but they don't seem to be listed anymore. Maybe they stopped making them.
__________________
"Food is just fuel for my bicycle engine."
"Food is just fuel for my bicycle engine."
Likes For ltokuno:
#24
seņor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,838
Bikes: '70s - '80s Campagnolo
Liked 6,970 Times
in
3,439 Posts
Here's a vintage set from Holland that came with a Miyata I bought yesterday. The three levers fit inside the red piece which has a tube scuffing surface on one side and script reading "Sport" on the other.
.
.
#25
weapons-grade bolognium
Join Date: Dec 2008
Location: Across the street from Chicago
Posts: 6,437
Bikes: Battaglin Cromor, Ciocc Designer 84, Schwinn Superior 1981
Liked 2,762 Times
in
958 Posts
I mostly use plastic Park levers, which are well over 25 years old.
For "hard cases", I have a pair of steel Dunlops (made in England). These have a very thin spoon and work well on tight s.o.b.s
I would guess they date from the early 70's, since I inherited them from my dad.
For "hard cases", I have a pair of steel Dunlops (made in England). These have a very thin spoon and work well on tight s.o.b.s
I would guess they date from the early 70's, since I inherited them from my dad.
Likes For thinktubes: