Stronglight 93 Spindle Length/Type?
07-07-09, 01:10 PM
#1
Vive la vélorution!
Thread Starter
Join Date: Oct 2006
Location: Straight Outta Davis, CA
Posts: 168
Bikes: SR PRO-AM
Likes: 0
Liked 1 Time
in
1 Post
Stronglight 93 Spindle Length/Type?
Hello,
I am looking to add a Stronglight 93 to my bike and I was wondering what spindle length and type (JIS/ISO, etc.) I would need for the bottom bracket to accommodate this crank set.
This is, by the way, on a standard threaded bottom bracket.
Thanks,
Ladule
I am looking to add a Stronglight 93 to my bike and I was wondering what spindle length and type (JIS/ISO, etc.) I would need for the bottom bracket to accommodate this crank set.
This is, by the way, on a standard threaded bottom bracket.
Thanks,
Ladule
Last edited by laman012; 07-07-09 at 01:31 PM.
07-07-09, 02:32 PM
#2
Senior Member
If you can get it, a Stronglight 118mm spindle will be the right length and taper for a double crankset. A TA spindle of that length would work, too.
Fwiw, I've also used Stronglight cranksets on Campy and Phil Wood BBs, likely with different tapers. It was kind of a mix-and-match situation.
Neal
Fwiw, I've also used Stronglight cranksets on Campy and Phil Wood BBs, likely with different tapers. It was kind of a mix-and-match situation.
Neal
