Bike Forums - Search Results

Search: Posts Made By: 2wheelsgood@no

Showing results 1 to 7 of 7
Search took 0.01 seconds.

Forum: Bicycle Mechanics

11-09-23, 12:55 PM

Replies: 24

Increasing granny gear on Sora 3x9

Views: 1,186

Posted By dedhed

Your existing crank is set up for a 45mm...

Your existing crank is set up for a 45mm chainline so watch for that spec on cranks or your FD may not reach the outer chainring...

Forum: Bicycle Mechanics

11-09-23, 12:10 PM

Replies: 24

Increasing granny gear on Sora 3x9

Views: 1,186

Posted By Iride01

These might work. But you might have to change...

These might work. But you might have to change out the BB. BB are inexpensive. So see if the BB is specific to the width of your BB shell or whether the supplied spacers make it work with a 68mm...

Forum: Bicycle Mechanics

11-09-23, 10:47 AM

Replies: 24

Increasing granny gear on Sora 3x9

Views: 1,186

Posted By dedhed

Apparently the market isn't big enough for making...

Apparently the market isn't big enough for making 74 bcd 4 bolt granny rings. They just don't seem to make them. Changing to a 5 arm would open up lots of choices. As Andy mentioned it would likely...

Forum: Bicycle Mechanics

11-09-23, 09:09 AM

Replies: 24

Increasing granny gear on Sora 3x9

Views: 1,186

Posted By Andrew R Stewart

Sorry to think that the OP might have an old...

Sorry to think that the OP might have an old enough version that was a 5 bolt 110/74 crankset. The issue with doing what I first suggested (which was the answer to the question, not the complete...

Forum: Bicycle Mechanics

11-09-23, 08:56 AM

Replies: 24

Increasing granny gear on Sora 3x9

Views: 1,186

Posted By Crankycrank

Check out SPA cycles in the UK. They have a few...

Check out SPA cycles in the UK. They have a few triple options and from what I have seen their own SPA brand are very good quality and priced very reasonably. I believe they are basically licensed...

Forum: Bicycle Mechanics

11-08-23, 10:51 PM

Replies: 24

Increasing granny gear on Sora 3x9

Views: 1,186

Posted By TC1

I make this offer from time to time when this...

I make this offer from time to time when this comes up, but I make my own custom chainrings -- usually when the configuration I want isn't available for purchase, but occasionally for fun. So if OP...

Forum: Bicycle Mechanics

11-08-23, 09:12 PM

Replies: 24

Increasing granny gear on Sora 3x9

Views: 1,186

Posted By 79pmooney

I wholeheartedly second getting a 110-74 BCD 5...

I wholeheartedly second getting a 110-74 BCD 5 spider crankset. If it were me, being 110-74 would be a lot more important than being Shimano. (Yes shifting might suffer without the proprietary...

Showing results 1 to 7 of 7