Addiction 2021.4
#451
Senior Member
Join Date: Dec 2019
Location: 757
Posts: 11,357
Bikes: Madone, Emonda, 5500, Ritchey Breakaway
Liked 5,306 Times
in
2,267 Posts
#452
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Liked 9,456 Times
in
4,672 Posts
TX has multiple groups that have meet-ups, at public establishments, with semi/autos conspicuously hanging off of them. I would consider that brandishing. *shrug*
#453
Silver Comet Fred
#454
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 18,495
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Liked 12,422 Times
in
6,353 Posts
The Ironman is getting closer to building. I spent last evening touching up the paint, having previously used Scratch-X to brighten up the paint. Then I went over the frame and hit the few spots with hints of rust with Kurust. The paint I used is close, but not perfect, so it's a good thing there were only a few spots.
Then I spent far too long re-truing the rear wheel, during which I screwed up the dishing by tightening the spokes on the wrong side - TWICE! - before I remembered that tightening spokes on that side moves the hub AWAY.
Then I took apart the B knuckle of the rear deraileur, since the bolt wasn't spinning in the knuckle as is should. Then I spent HALF AN HOUR trying to get the damn thing back together.
In the process of doing that, I had to take off the cage, so I had to spend ANOTHER half hour putting THAT knuckle back together. Now everything's working right. But I still have to clean up, grease, and reassemble the jockey wheels.
Then I spent far too long re-truing the rear wheel, during which I screwed up the dishing by tightening the spokes on the wrong side - TWICE! - before I remembered that tightening spokes on that side moves the hub AWAY.
Then I took apart the B knuckle of the rear deraileur, since the bolt wasn't spinning in the knuckle as is should. Then I spent HALF AN HOUR trying to get the damn thing back together.
In the process of doing that, I had to take off the cage, so I had to spend ANOTHER half hour putting THAT knuckle back together. Now everything's working right. But I still have to clean up, grease, and reassemble the jockey wheels.
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
#455
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,360
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Liked 8,534 Times
in
4,034 Posts
The Ironman is getting closer to building. I spent last evening touching up the paint, having previously used Scratch-X to brighten up the paint. Then I went over the frame and hit the few spots with hints of rust with Kurust. The paint I used is close, but not perfect, so it's a good thing there were only a few spots.
Then I spent far too long re-truing the rear wheel, during which I screwed up the dishing by tightening the spokes on the wrong side - TWICE! - before I remembered that tightening spokes on that side moves the hub AWAY.
Then I took apart the B knuckle of the rear deraileur, since the bolt wasn't spinning in the knuckle as is should. Then I spent HALF AN HOUR trying to get the damn thing back together.
In the process of doing that, I had to take off the cage, so I had to spend ANOTHER half hour putting THAT knuckle back together. Now everything's working right. But I still have to clean up, grease, and reassemble the jockey wheels.
Then I spent far too long re-truing the rear wheel, during which I screwed up the dishing by tightening the spokes on the wrong side - TWICE! - before I remembered that tightening spokes on that side moves the hub AWAY.
Then I took apart the B knuckle of the rear deraileur, since the bolt wasn't spinning in the knuckle as is should. Then I spent HALF AN HOUR trying to get the damn thing back together.
In the process of doing that, I had to take off the cage, so I had to spend ANOTHER half hour putting THAT knuckle back together. Now everything's working right. But I still have to clean up, grease, and reassemble the jockey wheels.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Likes For Eric F:
#456
IKR Had the same combination. Then I went to a 23. When I went to Italy in 1995 I got a 39t ring for the trip. Then it was 25 for the largest cog. For one Cycle Oregon I got a 27. Got a long cage RD and something stupid big (32 maybe) to go with my 50/34 compact crank for the 2013 Italy vacation. Now I am running a 50/34 and 12-28.
#457
VFL For Life
Join Date: Feb 2005
Location: Knoxville, TN
Posts: 51,710
Bikes: Velo Volmobile
Liked 1,942 Times
in
1,368 Posts
#458
Super Modest
Join Date: Jun 2002
Location: Central Illinois
Posts: 23,584
Bikes: Trek Emonda, Giant Propel, Colnago V3, Co-Motion Supremo, ICE VTX WC
Liked 4,797 Times
in
2,187 Posts
#459
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 18,495
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Liked 12,422 Times
in
6,353 Posts
When I got the Ritchey in 1997, it had 53/39 x 12-23. I got a 12-25 cassette, and that's all I had till 2007, when I got the Bianchi with 50/34 and 12-25. Compared to the Ritchey, the Bianchi felt like a mountain goat!
Then 14 years later, I got the Canyon with 52/36 and 11-34, and the Bianchi no longer felt like a mountain goat!
Now I'm getting these C&V bikes, and they have vintage gearing. So far, I've managed to convert most of them to 13-26, plus I ditched the 43t chainring on Mrs. Peel for a 39t. Still, I'm not going to be doing a lot of climbing with them.
Then 14 years later, I got the Canyon with 52/36 and 11-34, and the Bianchi no longer felt like a mountain goat!
Now I'm getting these C&V bikes, and they have vintage gearing. So far, I've managed to convert most of them to 13-26, plus I ditched the 43t chainring on Mrs. Peel for a 39t. Still, I'm not going to be doing a lot of climbing with them.
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
#460
Senior Member
Join Date: Dec 2019
Location: 757
Posts: 11,357
Bikes: Madone, Emonda, 5500, Ritchey Breakaway
Liked 5,306 Times
in
2,267 Posts
Im thinking pink, but I don’t think the orange would look bad.
#461
-------
More likely to see rifles and shotguns on racks in the back window of pickup trucks during hunting season.
Last edited by Mojo31; 10-04-21 at 12:02 PM.
#462
Senior Member
Join Date: May 2016
Location: Yucatán. México
Posts: 6,581
Bikes: 2022 Gt Avalanche
Liked 1,956 Times
in
1,232 Posts
The Ironman is getting closer to building. I spent last evening touching up the paint, having previously used Scratch-X to brighten up the paint. Then I went over the frame and hit the few spots with hints of rust with Kurust. The paint I used is close, but not perfect, so it's a good thing there were only a few spots.
Then I spent far too long re-truing the rear wheel, during which I screwed up the dishing by tightening the spokes on the wrong side - TWICE! - before I remembered that tightening spokes on that side moves the hub AWAY.
Then I took apart the B knuckle of the rear deraileur, since the bolt wasn't spinning in the knuckle as is should. Then I spent HALF AN HOUR trying to get the damn thing back together.
In the process of doing that, I had to take off the cage, so I had to spend ANOTHER half hour putting THAT knuckle back together. Now everything's working right. But I still have to clean up, grease, and reassemble the jockey wheels.
Then I spent far too long re-truing the rear wheel, during which I screwed up the dishing by tightening the spokes on the wrong side - TWICE! - before I remembered that tightening spokes on that side moves the hub AWAY.
Then I took apart the B knuckle of the rear deraileur, since the bolt wasn't spinning in the knuckle as is should. Then I spent HALF AN HOUR trying to get the damn thing back together.
In the process of doing that, I had to take off the cage, so I had to spend ANOTHER half hour putting THAT knuckle back together. Now everything's working right. But I still have to clean up, grease, and reassemble the jockey wheels.
What colors is yours?
#464
Senior Member
Join Date: May 2016
Location: Yucatán. México
Posts: 6,581
Bikes: 2022 Gt Avalanche
Liked 1,956 Times
in
1,232 Posts
#465
Senior Member
Join Date: May 2016
Location: Yucatán. México
Posts: 6,581
Bikes: 2022 Gt Avalanche
Liked 1,956 Times
in
1,232 Posts
#466
Senior Member
Join Date: Dec 2019
Location: 757
Posts: 11,357
Bikes: Madone, Emonda, 5500, Ritchey Breakaway
Liked 5,306 Times
in
2,267 Posts
#467
-------
I think I would go with the blue on the Madone (of those three colors) if it does not clash with the blues on the bike.
#468
Senior Member
Join Date: May 2016
Location: Yucatán. México
Posts: 6,581
Bikes: 2022 Gt Avalanche
Liked 1,956 Times
in
1,232 Posts
#469
Senior Member
Join Date: Dec 2019
Location: 757
Posts: 11,357
Bikes: Madone, Emonda, 5500, Ritchey Breakaway
Liked 5,306 Times
in
2,267 Posts
#470
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,360
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Liked 8,534 Times
in
4,034 Posts
When I got the Ritchey in 1997, it had 53/39 x 12-23. I got a 12-25 cassette, and that's all I had till 2007, when I got the Bianchi with 50/34 and 12-25. Compared to the Ritchey, the Bianchi felt like a mountain goat!
Then 14 years later, I got the Canyon with 52/36 and 11-34, and the Bianchi no longer felt like a mountain goat!
Now I'm getting these C&V bikes, and they have vintage gearing. So far, I've managed to convert most of them to 13-26, plus I ditched the 43t chainring on Mrs. Peel for a 39t. Still, I'm not going to be doing a lot of climbing with them.
Then 14 years later, I got the Canyon with 52/36 and 11-34, and the Bianchi no longer felt like a mountain goat!
Now I'm getting these C&V bikes, and they have vintage gearing. So far, I've managed to convert most of them to 13-26, plus I ditched the 43t chainring on Mrs. Peel for a 39t. Still, I'm not going to be doing a lot of climbing with them.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#471
So it is
Join Date: Sep 2008
Location: Westminster, CO
Posts: 21,505
Bikes: Luzerne, 684, Boreas, Wheelhouse, Alize©®, Bayamo, Cayo
Liked 4,924 Times
in
2,845 Posts
Likes For LAJ:
#472
Senior Member
Join Date: Dec 2019
Location: 757
Posts: 11,357
Bikes: Madone, Emonda, 5500, Ritchey Breakaway
Liked 5,306 Times
in
2,267 Posts
#473
-------
Thanks, I love it. The only thing I'd like different would be electronic shifting.
Of course, since that picture, I've changed to 28mm tires, changed the bars to crabon and made them level, added the Stages left crank PM, and changed the rotors to the black DA rotors (because they look cooler). It's about as good of a bike as this poseur can ride.
Of course, since that picture, I've changed to 28mm tires, changed the bars to crabon and made them level, added the Stages left crank PM, and changed the rotors to the black DA rotors (because they look cooler). It's about as good of a bike as this poseur can ride.
#474
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Liked 9,456 Times
in
4,672 Posts
IMO pink and blue works together and orange and blue works together but, in the context of a bike, I feel like you'd need to accent those colors more if you were to go that route with the cages, and they you get in to that try-hard, matchy-matchy region. That lighter blue would look nice, though, I think.
#475
-------
There is a deep blue that may look good on it: Bontrager Elite Water Bottle Cage | Trek Bikes