Disappointing development
#26
Senior Member
Join Date: Jul 2008
Location: Indiana
Posts: 166
Bikes: 85 Fuso, 86 Peloton, 84,88 Paramount
Likes: 0
Liked 1 Time
in
1 Post
I read that you are already using gel padded gloves and I would suggest additional hand padding. I have suffered with minor to moderate numbness in the left hand and the one thing that has cleared it up quite quickly is to put Sorbothane heel pads stuffed in the palms of my gloves. Note that it has to be Sorbothane, the regular squishy foot and heel pads don't work. If one is not enough, fit two in there. It obviously takes away a lot of dexterity but the beneficial effect was quite immediate for me.
#27
Senior Member
Join Date: Dec 2004
Location: Middle of da Mitten
Posts: 12,499
Bikes: Trek 7500, RANS V-Rex, Optima Baron, Velokraft NoCom, M-5 Carbon Highracer, Catrike Speed
Liked 759 Times
in
467 Posts
Don't forget, cars are recumbents, and enter intersections the same way. Even the short hood of my wife's Yaris puts the driver's head further back from the intersection than on any recumbent. As far as height, don't get sucked into believing that height=visibility, because in my experience the opposite is true. The outline of an upright rider gets lost in the background clutter, but a recumbent is IN THE ROAD and impossible to miss. So the rate of actually being noticed is better on the recumbent.
#28
Let's do a Century
Join Date: Oct 2004
Location: North Carolina
Posts: 8,316
Bikes: Cervelo R3 Disc, Pinarello Prince/Campy SR; Cervelo R3/Sram Red; Trek 5900/Duraace, Lynskey GR260 Ultegra
Liked 879 Times
in
408 Posts
Not much I can offer to assist. Thankfully I've never had those types of issues that I've had to try and deal with nor have I ridden with anyone who's experience is similar to yours. I suspect you probably know, but makes you wonder what the root cause of the issue is-carpal tunnel, arthritis, etc.
Good luck with getting it squared away. I'd hate it if you could not keep riding your bike of choice.
Good luck with getting it squared away. I'd hate it if you could not keep riding your bike of choice.
#29
Senior Member
Don't they still fashion those frames just down the road a piece from you? Wouldn't it be cool to order a bike from Rolf and then watch your frame being welded and painted, and then slip back up mid-state and watch the components go onto it? Would have to document that journey with lots of pictures!!
I'm still hoping to bring mine up next week. We're definately going to the Hostel Shoppe and if time permits maybe I might swing by Waterford. Bike leaning against sign pictures will be mandatory if I get there, as it would be kinda like a pilgrimage or something.
Last edited by cranky old dude; 10-02-09 at 04:29 PM.
#30
His Brain is Gone!
Thread Starter
Join Date: Sep 2006
Location: Paoli, Wisconsin
Posts: 9,979
Bikes: RANS Stratus, Bridgestone CB-1, Trek 7600, Sun EZ-Rider AX, Fuji Absolute 1.0, Cayne Rambler 3
Likes: 0
Liked 1 Time
in
1 Post
Yes, those Volae bents use frames made by Waterford in Wisconsin, made for the Hostel Shoppe in Wisconsin. I've been to the HS a couple of times. Test rode a couple of trikes there on my last visit, but decided that I like my two-wheel recumbents better ... for now.
#31
His Brain is Gone!
Thread Starter
Join Date: Sep 2006
Location: Paoli, Wisconsin
Posts: 9,979
Bikes: RANS Stratus, Bridgestone CB-1, Trek 7600, Sun EZ-Rider AX, Fuji Absolute 1.0, Cayne Rambler 3
Likes: 0
Liked 1 Time
in
1 Post
I read that you are already using gel padded gloves and I would suggest additional hand padding. I have suffered with minor to moderate numbness in the left hand and the one thing that has cleared it up quite quickly is to put Sorbothane heel pads stuffed in the palms of my gloves.
Wish I had read this earlier today, as I was in a shoe store and saw the heal pads on a rack. But went right past them.
Last edited by Tom Bombadil; 10-02-09 at 08:25 PM.
#32
Senior Member
you really need another recumbent, a SWB.
try a HPV SMGTe, lots of adjustment for comfort & easier to transport than LWB.
several years ago i wrecked the connective tissue in my elbow, it was hard to ride just
about anything. Upwrong bikes were uncomfortable, tried two other bents finally the SM was a perfect choice. It was my only rideable bike for a few years. My elbow has improved, now it shares road time with three other bikes & everyone is happy.
try a HPV SMGTe, lots of adjustment for comfort & easier to transport than LWB.
several years ago i wrecked the connective tissue in my elbow, it was hard to ride just
about anything. Upwrong bikes were uncomfortable, tried two other bents finally the SM was a perfect choice. It was my only rideable bike for a few years. My elbow has improved, now it shares road time with three other bikes & everyone is happy.
#33
Senior Member
Join Date: Jul 2008
Posts: 830
Likes: 0
Liked 0 Times
in
0 Posts
I had those issues some 8 years ago when I started significant cycling after retiring. It took a while, but I eventually could ride drop bars to 70+ miles with the bars level with the seat. Now I ride 98% mountain bike (bars 2" below the seat). However, I can jump on my road bike anytime and do 40 miles with little discomfort and this is at an age of 70. My last road ride was about two weeks ago.
The key to joint health and being pain free is a good weight training program. Lifting relatively heavy weights fast keeps everything ship-shape including the hands/wrists/arms/back/shoulders if one emphasises free weights vice machines. Push-ups are essential for me.
It takes a while too to get a bike set-up for good comfort and time for the body to adapt. Those were my issues . A good riding position tailored to one's physique is key and takes some work. However, for me upright was never an option due to poor handling (critical for off-road) and the inability to apply real power to the pedals.
Al
The key to joint health and being pain free is a good weight training program. Lifting relatively heavy weights fast keeps everything ship-shape including the hands/wrists/arms/back/shoulders if one emphasises free weights vice machines. Push-ups are essential for me.
It takes a while too to get a bike set-up for good comfort and time for the body to adapt. Those were my issues . A good riding position tailored to one's physique is key and takes some work. However, for me upright was never an option due to poor handling (critical for off-road) and the inability to apply real power to the pedals.
Al