Show us your gravel/cross bike...
#5252
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,805
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Liked 7,746 Times
in
4,306 Posts
Thank you, this is my fave bike at the moment! Modifications are my handiwork and I think "why" can be best answered with "why not"?
Longer version of "why not" - I like the aesthetics of vintage bikes combined with some modern aspects, and for some reason, I just have a soft spot for Peugeot bikes. This bike was laying around as a frame when I bought a small brazing torch, things just gradually escalated from there. Blank canvas etc... Building new would most certainly yield better results, but I did not have the skills when I started with this bike ~2 years ago. Left rear triangle is braced for longevity, IS mount for brake. Original fork was also modded with IS disc brake mount, but it's now assigned to garage shelf ornament as that head tube was replaced with fresh cut from Columbus Zona. Brakes are cable actuated hydros (2-piston Zoom Xtech), 140mm rear disc and 160mm in front.
I'm probably speaking gibberish to you, but video is subtitled in english for your convenience.
Longer version of "why not" - I like the aesthetics of vintage bikes combined with some modern aspects, and for some reason, I just have a soft spot for Peugeot bikes. This bike was laying around as a frame when I bought a small brazing torch, things just gradually escalated from there. Blank canvas etc... Building new would most certainly yield better results, but I did not have the skills when I started with this bike ~2 years ago. Left rear triangle is braced for longevity, IS mount for brake. Original fork was also modded with IS disc brake mount, but it's now assigned to garage shelf ornament as that head tube was replaced with fresh cut from Columbus Zona. Brakes are cable actuated hydros (2-piston Zoom Xtech), 140mm rear disc and 160mm in front.
I'm probably speaking gibberish to you, but video is subtitled in english for your convenience.
Love the creativity and reason for doing the project.
I took a frame building class a few years ago and built a Zona tubed road frame, have brazed some things to an 80s Schwinn Premis in order to put 2x11 components on, painted a handful of bikes, and currently have a mid-90s Cannondale CAAD3 road frame in the stand that I needed some minor fixing and was repainted. The decals I used are from the same company as yours and I also used a carbon fork as a replacement. Point is, I totally understand the reason for choosing to go this route- tinkering and the problem solving is also a hobby for you!
Likes For mstateglfr:
#5253
Senior Member
Join Date: Nov 2015
Location: Dublin, Ireland
Posts: 1,269
Bikes: Bianchi Ti Megatube; Colnago Competition; Planet-X EC-130E; Klein Pulse; Amp Research B4; Litespeed Catalyst; Trek Y11
Liked 482 Times
in
261 Posts
Girlfriend wanted to avail of the "bike to work" scheme (a tax incentive from the govt to encourage bike commuting), and she got a 2022 Cinelli Zydeco.
2022 Cinelli Zydeco
2022 Cinelli Zydeco
Likes For ridelikeaturtle:
#5254
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,360
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Liked 8,542 Times
in
4,037 Posts
First ride today on this new (to me) beast. So much fun!
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Likes For Eric F:
#5255
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,805
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Liked 7,746 Times
in
4,306 Posts
#5256
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,360
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Liked 8,542 Times
in
4,037 Posts
Unfortunately, no. Bear was a short-lived house brand for retailer Mike’s Bikes. Not many were sold, and the info is limited. The frame is Taiwanese-built carbon, and this has a 2x11 Ultegra build. I’m very happy with the bike, and the price I paid for it.
Likes For mikehuangsd:
Likes For scotch:
Likes For jaseyjase:
#5260
Senior Member
Join Date: Sep 2020
Location: SE Wyoming
Posts: 604
Bikes: 1995 Specialized Rockhopper,1989 Specialized Rock Combo, 2013 Specialized Tarmac Elite
Liked 589 Times
in
278 Posts
Not fancy but it fits my needs. It was $75 on Facebook Marketplace with a four-bike Thule rack thrown in.
#5261
Newbie
Join Date: Nov 2022
Location: France
Posts: 11
Bikes: '93 Trek 520 - '94 Ferraroli Elegante - '95 Sunn 5000- '96 Decathlon Rockrider 700 - '21 Chiru Vagus Ti
Likes: 0
Liked 1 Time
in
1 Post
Nice 26er conversion jaseyjase ! What is the original bike?
I cannot post pictures yet but I am the lucky owner of a '21 titanium Chiru Vagus! It is really a great bike
I cannot post pictures yet but I am the lucky owner of a '21 titanium Chiru Vagus! It is really a great bike
#5262
Nice 26er conversion jaseyjase ! What is the original bike?
original bike wasnt anything too flash, but i wanted a steel frame and this popped up locally. Geometry worked, but needed some adapters to run the flat mount callipers.
https://www.bikeroar.com/products/ce...-stainless-red
Likes For jaseyjase:
#5264
Senior Member
NICE! That's one of the most interesting bikes I've seen in a long time! Love to see a resto/mod with modern components....the addition of a rear disc brake and new head tube is unusual - and a big carbon disc fork combined with a 1975 frame...FUN!
You should post that pic on the Classic and Vintage page - it'll drive the purists INSANE!
You should post that pic on the Classic and Vintage page - it'll drive the purists INSANE!
Last edited by jlaw; 12-11-22 at 06:57 PM.
Likes For jlaw:
Likes For dcee604:
#5266
Senior Member
Join Date: Oct 2008
Location: Frankfurt, Germany
Posts: 1,554
Bikes: Focus trash find commuter, Eddy Merckx Corsa, BP Stealth TT bike, Leader 720 TT bike, Boardman Comp Hybrid drop bar conversion, Quantec CX budget cyclocross build, SerottaNOS frameset ready to build up!
Liked 106 Times
in
70 Posts
What really winds them up is when someone takes a nice steel frame and hacks/Dremels off the brazed-on bits to make a s***** singlespeed. They even have a verb for it: it’s called ‘drewing’ a frame.
anyway, back to this conversion: I did something similar with a blue Peugeot touring frame, nowhere near as nice as our friend’s effort from Finland, but I was pleased with the result and it rode really well.
#5267
Px-50L in the snow
I guess C/V ppl would be more appreciative than not, as this is indeed a bit more than the basic ss mutilation of a vintage bike. Since the last photo, I found a reasonably priced french threaded hollowtech 2 bb, so now it’s sporting a modern Race Face crankset too. I also managed to fit those 54-584 studded tires with some SKS plastic mudguards for winter randonneuring shenigans. Cannot really tell from that picture, but winter wheelset is built around bike’s original Rigida steel rims just for kicks. There’s some toe overlap especially with the clipless pedals, but for the intended usage, I’m good.
Last edited by gesta; 12-23-22 at 04:56 AM.
#5268
Senior Member
#5269
I’m a little Surly
Join Date: Jan 2010
Location: Near the district
Posts: 2,429
Bikes: Two Cross Checks, Karate Monkey, Disc Trucker, and a VO Randonneur
Liked 1,304 Times
in
651 Posts
So I did a little 5 mile around the block ride to try out my Christmas present (Garmin Explore 2), and the new Centaur group I got a deal on. I like everything but the crankset.
Likes For Germany_chris:
#5270
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 3,902
Bikes: Trek FX 2, Cannondale Synapse x2, Cannondale CAAD4, Santa Cruz Stigmata 3
Liked 1,577 Times
in
1,092 Posts
Likes For Flatforkcrown:
#5273
OM boy
[QUOTE=Germany_chris;22748809...
Believe it or not that saddle isn’t uncomfortable[/QUOTE]
why would it be 'uncomfortable' ? and whatz not to like about the crankset ? tooth range? slow shift?
Muck On
Yuri
Believe it or not that saddle isn’t uncomfortable[/QUOTE]
why would it be 'uncomfortable' ? and whatz not to like about the crankset ? tooth range? slow shift?
Muck On
Yuri
#5274
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,360
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Liked 8,542 Times
in
4,037 Posts
A few updates to my Bear since I bought it...
- Whisky Spano carbon handlebar
- Omni Racer stem
- Omni Racer carbon seat post
- Shimano XT 160mm front disc
- Pirelli Cinturato Gravel H (rear) and M (front) tires, 700 x 40
- A few gold blingy bits
- Whisky Spano carbon handlebar
- Omni Racer stem
- Omni Racer carbon seat post
- Shimano XT 160mm front disc
- Pirelli Cinturato Gravel H (rear) and M (front) tires, 700 x 40
- A few gold blingy bits
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Likes For Eric F:
#5275
I’m a little Surly
Join Date: Jan 2010
Location: Near the district
Posts: 2,429
Bikes: Two Cross Checks, Karate Monkey, Disc Trucker, and a VO Randonneur
Liked 1,304 Times
in
651 Posts
The crank works great but it just looks wrong on this bike