Winter Training: Indoor Riding & Weight-Lifting
#53
windsor84
Join Date: Sep 2006
Location: new jersey
Posts: 18
Bikes: windsor single speed
Likes: 0
Liked 0 Times
in
0 Posts
this is a track related question. what type of training should be done in the off season, like weights, rollers,running... i really have no clue besides ride on rollers.
#54
Junior Member
Join Date: Oct 2006
Posts: 5
Bikes: Mountain
Likes: 0
Liked 0 Times
in
0 Posts
What do you all think of spin classes and stationary bikes? Are they an effective alternative during the winter? Or are you bound to lose some of your cycling fitness? Is this kind of the same idea as runners running on a treadmill?
#55
Senior Member
Join Date: Sep 2004
Location: North Central Massachusetts
Posts: 1,281
Bikes: Cannondale R600
Likes: 0
Liked 0 Times
in
0 Posts
On the one hand, trainers and spin classes aren't really riding, so you can't expect to start spring as strong as you left off in the fall.
However, they are lots better than nothing. It also gives you the opportunity to work on technique -- there's more to pedaling than just turning the cranks, and stuff like spin classes will help (as well as retain some of your aerobic capabilities). So yes, I think they can definitely be an effective alternative.
One of the down sides is that riding a trainer can be awfully boring.
However, they are lots better than nothing. It also gives you the opportunity to work on technique -- there's more to pedaling than just turning the cranks, and stuff like spin classes will help (as well as retain some of your aerobic capabilities). So yes, I think they can definitely be an effective alternative.
One of the down sides is that riding a trainer can be awfully boring.
#56
You may be interested in crossfit www.crossfit.com. Here is my current schedule. I have found timing my work and trying to beat it really makes a huge difference.
Note,
All the "ring" stuff is done on gymnastic rings that can be adjusted in height and it seems to cut what I can do with the normal exercises in 1/2 it is great for uping the intesity and is good for all the stabilizer muscles.
https://www.mensjournal.com/hea...ages/wrk_pushups1.jpg
five rounds for time
5 ring pullups
10 ring Push-ups
20 squats
As many rounds as possible in 20 min
3 ring pullups
5 ring pushups
10 squats
5x5 for time
ring dips
inverted pullups
Tabata 20 seconds on 10 off
8 intervals push-ups
8 intervals ring Pullups
8 intervals plank
8 intervals squats
There is no rest between exercises
5x5 for time
hand stand pushups
ring pullups
For Time
25 ring pullups
50 ring pushups
100 squats
I have a very compelling tabata article and will post it if I can find.
Note,
All the "ring" stuff is done on gymnastic rings that can be adjusted in height and it seems to cut what I can do with the normal exercises in 1/2 it is great for uping the intesity and is good for all the stabilizer muscles.
https://www.mensjournal.com/hea...ages/wrk_pushups1.jpg
five rounds for time
5 ring pullups
10 ring Push-ups
20 squats
As many rounds as possible in 20 min
3 ring pullups
5 ring pushups
10 squats
5x5 for time
ring dips
inverted pullups
Tabata 20 seconds on 10 off
8 intervals push-ups
8 intervals ring Pullups
8 intervals plank
8 intervals squats
There is no rest between exercises
5x5 for time
hand stand pushups
ring pullups
For Time
25 ring pullups
50 ring pushups
100 squats
I have a very compelling tabata article and will post it if I can find.
#57
NorCal Climbing Freak
Originally Posted by jazzy_cyclist
On the one hand, trainers and spin classes aren't really riding, so you can't expect to start spring as strong as you left off in the fall.
However, they are lots better than nothing. It also gives you the opportunity to work on technique -- there's more to pedaling than just turning the cranks, and stuff like spin classes will help (as well as retain some of your aerobic capabilities). So yes, I think they can definitely be an effective alternative.
One of the down sides is that riding a trainer can be awfully boring.
However, they are lots better than nothing. It also gives you the opportunity to work on technique -- there's more to pedaling than just turning the cranks, and stuff like spin classes will help (as well as retain some of your aerobic capabilities). So yes, I think they can definitely be an effective alternative.
One of the down sides is that riding a trainer can be awfully boring.
But in terms of fitness, if you really want to put in the time over the winter on the trainer, there is no reason you can't come into spring as strong or stronger than in the fall.
#58
Senior Member
Join Date: Aug 2004
Location: Birmingham, AL
Posts: 1,648
Likes: 0
Liked 0 Times
in
0 Posts
I have heard the same thing concerning people acting like riding on a trainer is only going to help a fraction of what actual riding does. I would think it would be fairly close. I have been riding my friend's Kurt Kinetic trainer the last week and I feel like it is giving me close to workout my regular road ride does. I actually have been able to ride longer each ride since the trainer takes out the getting gear together and the 30 minute round trip in the car I normally take. Instead of riding the bike an hour, I am getting around an hour and a half. I would love to hear someone knowledgeable comment on the subject. I just bought a kurt kinetic trainer, so I am hoping this purchase will be as beneficial as I originally had hoped.
#59
Youngin biker
Join Date: Jul 2006
Location: St. Joe, MO
Posts: 32
Bikes: Wal-Mart brands
Likes: 0
Liked 0 Times
in
0 Posts
I am having trouble adjusting to our gyms bicycle. It is one of those where you sit back in a chair (resembles a child car restraint) and pedal forwards instead of down. I find this difficult and what would you recommend for this type of training? Is it strictly for leg muscle or can I do something to help my cardio without using my lower back too much?
#61
just another gosling
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,773
Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004
Liked 2,113 Times
in
1,493 Posts
I happen to like rollers with a resistance unit on them. You can do a lot on rollers with a resistance unit - steady state Z2, one legged pedaling, tempo intervals, FastPedal, TT tests, and all sorts of aerobic and anaerobic intervals. I've hit on a workout schema where I ride rollers for 1 hour to 1:45 (my personal boredom limit) using different workouts on different days of the week, and then twice a week I go to the gym after my roller workout and do a circuit workout, like Friel suggests, with one set of 30, working almost to failure. Takes 20 minutes. I've tried a lot of different weight workouts over the years and this is what works for me. Every one's different. I never get injured doing this, and that's critical. Plus, a hard weight lifting regimen is a big training hit. I find it cuts down on my ability to put in hard cycling time and that's not so good. Another thing I like at the gym is the StepMill - one of those endless stairs machines that looks like an escalator. Ride that thing for over an hour in Z3 and your legs will know you've done something. It's something different to do in the winter and helps my out of the saddle power.
#62
Senior Member
Join Date: May 2005
Location: Lake Tapps, Wa
Posts: 66
Bikes: 06 Specialized Roubaix Elete Triple
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by KeithA
I think the guy I bought from is named James. He's located in Santa Monica and apparantly tunes 1000 of the machines a month for gyms and private owners.
#63
Black La Lane
Join Date: Dec 2004
Location: Maplewood, NJ
Posts: 317
Bikes: EPX 303 (You probably never heard of it)
Likes: 0
Liked 0 Times
in
0 Posts
Where do spin cycles work out in the scheme of things?
Our LifeCycle is on its last legs. I also find it pretty boring, especially with getting out there and actually cycling. I know that a spin cycle won't be as exciting as actually riding my bike outdoors, but, with the spin DVD's, it should be some improvement.
The reason I'm thinking about a spin cycle is that my whole family has used the LifeCycle for years. I'd like something that we can all use. I'm thinking of the Lamond very seriously, so if anyone wants to say yea or nay, please do so before I spend the money.
By the way, this thread is a good idea.
Our LifeCycle is on its last legs. I also find it pretty boring, especially with getting out there and actually cycling. I know that a spin cycle won't be as exciting as actually riding my bike outdoors, but, with the spin DVD's, it should be some improvement.
The reason I'm thinking about a spin cycle is that my whole family has used the LifeCycle for years. I'd like something that we can all use. I'm thinking of the Lamond very seriously, so if anyone wants to say yea or nay, please do so before I spend the money.
By the way, this thread is a good idea.
Despite the excitement of the bike, spin cycles are boring indeed if you get on it and mindlessly spin. I especially find that time passes very slowly when you watch the clock. If, on the other hand you come with a pre-written program, it can be quite challenging; something like this:
Warmup:
light gear sping 80 rpm's 50 pedals strokes each leg
light gear sping 90 rpm's 50 pedals strokes each leg
light gear sping 100 rpm's 50 pedals strokes each leg
gradually increase resistance over then next 100 strokes until you cannot maintain at least 80 rpm;s
Workout:
spin 50 strokes 80 rpm's
immediately followed by 50 strokes 90 rpm's
immediately followed by 50 strokes 100 rpm's
immediately followed by 50 strokes 110 rpm's
2 minute easy recovery and repeat 2 more times
Set modeately high gear and repeat standing
There are lots of things you can simulate by just programming them into your workout. Just make certain to program enough recovery time between intervals. Use a h/r monitor. Before you know it, you have put in 45-60 minutes.
Use a fan and keep and towel and lots of water on hand. If your rides are still boring, you are not working hard enough.
#65
Senior Member
#66
NorCal Climbing Freak
Something light ought to do the trick. Do your workout, then eat your breakfast.
#67
Newbie
Join Date: Oct 2007
Posts: 32
Likes: 0
Liked 0 Times
in
0 Posts
Any other comments on rollers with resistance units vs. trainers? It seems like the OP and a lot of other posts in this thread are only comparing trainers with roller that don't have resistance units. I haven't tried either and am looking for something for the winter...
I happen to like rollers with a resistance unit on them. You can do a lot on rollers with a resistance unit - steady state Z2, one legged pedaling, tempo intervals, FastPedal, TT tests, and all sorts of aerobic and anaerobic intervals. I've hit on a workout schema where I ride rollers for 1 hour to 1:45 (my personal boredom limit) using different workouts on different days of the week, and then twice a week I go to the gym after my roller workout and do a circuit workout, like Friel suggests, with one set of 30, working almost to failure. Takes 20 minutes. I've tried a lot of different weight workouts over the years and this is what works for me. Every one's different. I never get injured doing this, and that's critical. Plus, a hard weight lifting regimen is a big training hit. I find it cuts down on my ability to put in hard cycling time and that's not so good. Another thing I like at the gym is the StepMill - one of those endless stairs machines that looks like an escalator. Ride that thing for over an hour in Z3 and your legs will know you've done something. It's something different to do in the winter and helps my out of the saddle power.
#68
Senior Member
On the one hand, trainers and spin classes aren't really riding, so you can't expect to start spring as strong as you left off in the fall.
However, they are lots better than nothing. It also gives you the opportunity to work on technique -- there's more to pedaling than just turning the cranks, and stuff like spin classes will help (as well as retain some of your aerobic capabilities). So yes, I think they can definitely be an effective alternative.
One of the down sides is that riding a trainer can be awfully boring.
However, they are lots better than nothing. It also gives you the opportunity to work on technique -- there's more to pedaling than just turning the cranks, and stuff like spin classes will help (as well as retain some of your aerobic capabilities). So yes, I think they can definitely be an effective alternative.
One of the down sides is that riding a trainer can be awfully boring.
Spin bikes and trainers (not so much rollers), are very inflexible (esp. spin bikes) and the lack of natural flexibility contributes to added joint pressure.
Although I always really try to focus on my form, I'm especially sensitive when on the spin bike in an attempt to minimize repetitive stress on my joints (knees, hips, elbows).
An increase in (safe) spinning this winter has already really allowed a big improvement in mid-January fitness for me. I always try to get a spot where I can check my form in the mirror to reinforce proper knee alignment, smooth pedaling, etc. I still sweat buckets!
#69
Enjoying the ride
Join Date: Apr 2005
Location: Lexington, KY
Posts: 38
Bikes: Trek 850, Giant OCR2, Scattante Race, Giant TCR Advanced Pro 1
Likes: 0
Liked 0 Times
in
0 Posts
I do all of my summer riding and winter working-out in the morning without eating anything before the ride, just cramming the carbs the night before and staying hydrated. I haven't bonked yet, but now that I've said that I'll probably bonk tomorrow.
#70
Sultan of Slow
Join Date: Jan 2008
Location: Columbus, GA
Posts: 17
Bikes: Mystery Bike, Specialized '08 Tricross, No-name Single Speed
Likes: 0
Liked 0 Times
in
0 Posts
okay, cape. let's talk lifting from both a general health and a cycling viewpoint, and see what you think. i'm looking at an article that says you want to do multi-joint exercises (whatever that is). it goes on to say that if you lift, there are four multi-joint exercises you need to do above all others; pull-ups, squats, bench presses, and deadlifts. do you buy all that? i've also been toying with the idea of buying a home machine to do my lifting and get rid of the club membership. if you agree with the above stuff, it seems to me i wouldn't even have to buy a large home machine. all i would need would be a bench, a tall rack for bench presses and squats (maybe with pull-up handles on it), a bar or two, and some weights. does this sound reasonable?
---I don't buy all four of those exercises. I would say that pull-ups are a go. But I think that bench should be replaced with dips simply because it allows one to practice core stability much more than standard bench...and you can still add weight to it. Deads and squats are a problem area in that they do provide a great deal of benefits for a cyclist, but I feel that Olympic lifts such as: clean jerk, clean and press, snatch, etc, all using a sub-maximal weight (able to get 30-50 reps total) in a circuit fashion would be a more benefit the cyclist more as it strengthens the muscles yet still involves aerobic conditioning.
#72
If you dont mind a used set, watch craigslist.com, etc. I recently saw a kreitler set-up (rollers and fan) listed at $200. Was already sold by the time I saw and called on the listing ! (less than a day)
#73
Junior Member
Join Date: Aug 2008
Location: Lafayette, CO
Posts: 12
Likes: 0
Liked 0 Times
in
0 Posts
I agree with the others: spin bikes and resistance trainers (or rollers I'd guess, though I've never used them) are great during the winter and can definitely keep your fitness up. In fact, I know someone who, for job reasons, had to switch all his training indoor after 20 years of regular training and actually improved his performance. While I wouldn't recommend that approach, I do think that trainers are particularly well suited for interval workouts--maybe even better than the road where you have to deal with stop signs and such. The only intervals I've found better more effective are those done behind a moped or scooter, and I don't have access to that now or over the winter.
#74
Cat 666
Join Date: Jul 2008
Location: nyack, ny (yes, that one)
Posts: 1,462
Likes: 0
Liked 0 Times
in
0 Posts
question here, im seeing some opposing stuff on what kind of lifting to do. some say more reps less weights to build endurance, others like the performance training system site say to do one set to fail. which should i be working on?
#75
not actually Nickatina
Join Date: Oct 2006
Location: OR
Posts: 4,447
Likes: 0
Liked 0 Times
in
0 Posts
Work in phases. Say, 6 weeks of endurance lifting, 4 weeks max strength, 6 weeks power (explosive movements in your lifts, less weight than strength but more than endurance), etc.