View Poll Results: ...
a
1
100.00%
b
1
100.00%
Multiple Choice Poll. Voters: 1. You may not vote on this poll
eBay / CraigsList finds - "Are you looking for one of these!?" Part II
Stop reading my posts!
not sure either ^ would like to see a close-up of the stay-caps. For that matter would love to see the crankset installed correctly!
It might be legit, fork panto certainly looks it. Also could be a "budget" model with very little chrome...the internal cable "slots" don't look familiar.
Edit: also seems like some rattlecan white paint may have been applied (on chainstays if not elsewhere).
$100 for a true Casati would be a steal.
It might be legit, fork panto certainly looks it. Also could be a "budget" model with very little chrome...the internal cable "slots" don't look familiar.
Edit: also seems like some rattlecan white paint may have been applied (on chainstays if not elsewhere).
$100 for a true Casati would be a steal.
Last edited by unworthy1; 03-14-23 at 11:43 PM.
Full Member
I simply don't know enough to say it's real and the internal cabling looks unsightly. Anyone know if the BB of a Casati has the same cut outs as shown in picture 2? If it's real is a nice price...
Do like the 57.15 frame sizing!
https://www.facebook.com/marketplace...07857370771707
Listed in Fort Walton Beach, FL
I don't know if the BB for a Casati has the same cut outs as shown here.
Do like the 57.15 frame sizing!
https://www.facebook.com/marketplace...07857370771707
57.15 Centimeter Casati Italian Racing Bicycle
$100 · In stockListed in Fort Walton Beach, FL
- Condition
Used – good
I don't know if the BB for a Casati has the same cut outs as shown here.
Banned.
And hell yes, at that price it's a steal!
DD
Banned.
DD
Likes For Drillium Dude:
Full Member
>> the 'C' cutout in the BB shell is backwards when compared to mine.
The picture is left/right reversed, and therefore the crankset is installed on the correct side.
cheers -mathias
The picture is left/right reversed, and therefore the crankset is installed on the correct side.
cheers -mathias
Senior Member
There are several arguments against the idea that the Raleigh-labeled tubing was relabeled Reynolds, the main one being that paying Reynolds to ship their expensive tubing from England to Taiwan, only to disguise it with a lookalike decal that says "Raleigh," thus diminishing the appeal of the bike, makes no sense.
The clincher, for me, is that, at the same time that most of the Raleigh USA models were labeled "Raleigh 555" and the like, the Raleigh USA Grand Prix had a genuine Reynolds 531 label. There would have been no point to correctly labeling one bike built with Reynolds tubing while simultaneously using Reynolds tubing in other frames but sticking the "Raleigh" label on those.
I was working in a shop that sold Raleigh bikes during that period. I wish it had occurred to me to ask the sales rep the retrospectively obvious question concerning the source of the tubing. New England reticence on my part, I guess.
Likes For Trakhak:
Full Member
The drive-side crank arm is installed in the non-drive side. Look at the derailleur hanger.
Likes For James1964:
Senior Member
Join Date: Mar 2021
Location: SoCal
Posts: 2,920
Bikes: Cuevas Custom, Cimmaron, 1988 "Pinalized Rockma", 1984 Trek 510, Moulton custom touring, Raleigh Competition GS, Bridgestone Mb-2 & 3, 1980's Peugeot - US, City, & Canyon Express (6)
Liked 4,837 Times
in
2,264 Posts
Surly - $265 - Lakeside. CA
https://www.facebook.com/marketplace...tory_type=post
bad pics, looks a little scrappy, but price is right
https://www.facebook.com/marketplace...tory_type=post
bad pics, looks a little scrappy, but price is right
Senior Member
Join Date: Mar 2021
Location: SoCal
Posts: 2,920
Bikes: Cuevas Custom, Cimmaron, 1988 "Pinalized Rockma", 1984 Trek 510, Moulton custom touring, Raleigh Competition GS, Bridgestone Mb-2 & 3, 1980's Peugeot - US, City, & Canyon Express (6)
Liked 4,837 Times
in
2,264 Posts
I don't mess with carbon fiber, but this is only the 2nd one of these I have seen, no clue on pricing
Peugeot "Racing Team" - $600 - Bakersfield, CA
https://www.facebook.com/marketplace...727790456767/?
Peugeot "Racing Team" - $600 - Bakersfield, CA
https://www.facebook.com/marketplace...727790456767/?
Likes For SoCaled:
Senior Member
Join Date: Mar 2021
Location: SoCal
Posts: 2,920
Bikes: Cuevas Custom, Cimmaron, 1988 "Pinalized Rockma", 1984 Trek 510, Moulton custom touring, Raleigh Competition GS, Bridgestone Mb-2 & 3, 1980's Peugeot - US, City, & Canyon Express (6)
Liked 4,837 Times
in
2,264 Posts
Likes For SoCaled:
Steel is real
Join Date: Mar 2013
Location: Not far from Paris
Posts: 2,428
Bikes: 1992Giant Tourer,1992MeridaAlbon,1996Scapin,1998KonaKilaueua,1993Peugeot Prestige,1991RaleighTeamZ(to be upgraded),1998 Jamis Dragon,1992CTWallis(to be built),1998VettaTeam,1995Coppi(to be built),1993Grandis(to be built)
Liked 1,256 Times
in
834 Posts
I don't mess with carbon fiber, but this is only the 2nd one of these I have seen, no clue on pricing
Peugeot "Racing Team" - $600 - Bakersfield, CA
https://www.facebook.com/marketplace...727790456767/?
Peugeot "Racing Team" - $600 - Bakersfield, CA
https://www.facebook.com/marketplace...727790456767/?
Likes For georges1:
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 9,007
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Liked 6,203 Times
in
2,002 Posts
I don't mess with carbon fiber, but this is only the 2nd one of these I have seen, no clue on pricing
Peugeot "Racing Team" - $600 - Bakersfield, CA
https://www.facebook.com/marketplace...727790456767/?
Peugeot "Racing Team" - $600 - Bakersfield, CA
https://www.facebook.com/marketplace...727790456767/?
__________________
Steel is real...and comfy.
Steel is real...and comfy.
Likes For jamesdak:
Banned.
Surly - $265 - Lakeside. CA
https://www.facebook.com/marketplace...tory_type=post
bad pics, looks a little scrappy, but price is right
https://www.facebook.com/marketplace...tory_type=post
bad pics, looks a little scrappy, but price is right
Senior Member
Join Date: Jan 2010
Location: se MIch.
Posts: 2,593
Bikes: 1938 claud butler,1983 Basso,teledyne titan,teocali super,nrs,1993 stumpjumper fsr,Paramountain,Paramount Buell(sold),4 banger,Zaskar LE,Colnago Master Ibex MTB,1987ish,.etc....
Liked 3,468 Times
in
1,701 Posts
Stop reading my posts!
That would have been an older post. Last time I looked, he had come around to the idea that the tubing labeled "Raleigh 555" (and the other variants) was supplied by Tange or Ishiwata or another Asian manufacturer.
There are several arguments against the idea that the Raleigh-labeled tubing was relabeled Reynolds, the main one being that paying Reynolds to ship their expensive tubing from England to Taiwan, only to disguise it with a lookalike decal that says "Raleigh," thus diminishing the appeal of the bike, makes no sense.
The clincher, for me, is that, at the same time that most of the Raleigh USA models were labeled "Raleigh 555" and the like, the Raleigh USA Grand Prix had a genuine Reynolds 531 label. There would have been no point to correctly labeling one bike built with Reynolds tubing while simultaneously using Reynolds tubing in other frames but sticking the "Raleigh" label on those.
I was working in a shop that sold Raleigh bikes during that period. I wish it had occurred to me to ask the sales rep the retrospectively obvious question concerning the source of the tubing. New England reticence on my part, I guess.
There are several arguments against the idea that the Raleigh-labeled tubing was relabeled Reynolds, the main one being that paying Reynolds to ship their expensive tubing from England to Taiwan, only to disguise it with a lookalike decal that says "Raleigh," thus diminishing the appeal of the bike, makes no sense.
The clincher, for me, is that, at the same time that most of the Raleigh USA models were labeled "Raleigh 555" and the like, the Raleigh USA Grand Prix had a genuine Reynolds 531 label. There would have been no point to correctly labeling one bike built with Reynolds tubing while simultaneously using Reynolds tubing in other frames but sticking the "Raleigh" label on those.
I was working in a shop that sold Raleigh bikes during that period. I wish it had occurred to me to ask the sales rep the retrospectively obvious question concerning the source of the tubing. New England reticence on my part, I guess.
Cannot recall the number, nor any more details, and cannot vouch for any of it being true, but could have been called Reynolds 525 (or pick your numbers: 5XX).
Besides this Mercier i don't think I've seen "Taiwan Reynolds tubing" anywhere else.
Likes For unworthy1:
Banned.
DD
Likes For Drillium Dude:
Steel is real
Join Date: Mar 2013
Location: Not far from Paris
Posts: 2,428
Bikes: 1992Giant Tourer,1992MeridaAlbon,1996Scapin,1998KonaKilaueua,1993Peugeot Prestige,1991RaleighTeamZ(to be upgraded),1998 Jamis Dragon,1992CTWallis(to be built),1998VettaTeam,1995Coppi(to be built),1993Grandis(to be built)
Liked 1,256 Times
in
834 Posts
Likes For georges1:
Senior Member
Just to throw a little (trivia) mud in the waters: I had a tig-welded Mercier "Euro-something" frame, circa maybe '90s, that had been told was made (in Taiwan)with a tubing that was "licensed by Reynolds" for Taiwan manufacture.
Cannot recall the number, nor any more details, and cannot vouch for any of it being true, but could have been called Reynolds 525 (or pick your numbers: 5XX).
Besides this Mercier i don't think I've seen "Taiwan Reynolds tubing" anywhere else.
Cannot recall the number, nor any more details, and cannot vouch for any of it being true, but could have been called Reynolds 525 (or pick your numbers: 5XX).
Besides this Mercier i don't think I've seen "Taiwan Reynolds tubing" anywhere else.
[Edit: the ". . . ed by" line at the bottom of the label bothered me---"Licensed by"?---so I downloaded another 531 label photo from the same page that was taken from the drive side. Zooming in on the helpfully high-resolution photo revealed the words are "Manufactured by TI REYNOLDS LIMITED, England."]
Last edited by Trakhak; 03-15-23 at 04:35 PM.
Steel is real
Join Date: Mar 2013
Location: Not far from Paris
Posts: 2,428
Bikes: 1992Giant Tourer,1992MeridaAlbon,1996Scapin,1998KonaKilaueua,1993Peugeot Prestige,1991RaleighTeamZ(to be upgraded),1998 Jamis Dragon,1992CTWallis(to be built),1998VettaTeam,1995Coppi(to be built),1993Grandis(to be built)
Liked 1,256 Times
in
834 Posts
1992 Peugeot CF 708P C - Reynolds 708 frameset - size 59 - mint condition, I have the same frame but in black and violet colors with a carbon fork and in my size equiped with shimano, it is a very remarkable frame which is comfy,rigid and quite snappy.708 classic isn't well known but it is a very good tubing with lots of qualities
Senior Member
Join Date: Jan 2010
Location: se MIch.
Posts: 2,593
Bikes: 1938 claud butler,1983 Basso,teledyne titan,teocali super,nrs,1993 stumpjumper fsr,Paramountain,Paramount Buell(sold),4 banger,Zaskar LE,Colnago Master Ibex MTB,1987ish,.etc....
Liked 3,468 Times
in
1,701 Posts
$750. san fran.
https://sfbay.craigslist.org/sfc/bik...598475170.html maybe a knucklehead chopper in the foreground???
Full Member
Possible proof that white frame was the first one built after a 3 hour lunch of fresh pasta, fresh baked bread and lotsa vino!!!
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 3,123
Bikes: Panasonic PT-4500, Miele Touring and Batavus Pro
Liked 2,486 Times
in
1,462 Posts
Posted a day back inDerby, Kansas
Unsure if that is a Duo-Par RD?
https://www.facebook.com/marketplace...09390308433872
Listed a day ago in Derby, KS
MessageDetails
Unsure if that is a Duo-Par RD?
https://www.facebook.com/marketplace...09390308433872
54cm/21" Schwinn Passage Road/Touring/Gravel Bike
$150Listed a day ago in Derby, KS
MessageDetails
- Condition
Used – good - Material
Chromoly - Bicycle type
Road bike
Likes For WGB:
Bikes are okay, I guess.
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 6,977
Bikes: Waterford Paramount Touring, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT
Liked 2,482 Times
in
1,575 Posts
Likes For thumpism:
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 3,123
Bikes: Panasonic PT-4500, Miele Touring and Batavus Pro
Liked 2,486 Times
in
1,462 Posts
Your basic $79 Trek 420 - Not a 51cm bike and, judging from that seat post bolt and general condition, I'd bring a set of Allen keys and make sure post and stem move before I bought it.
** Per seller ** "spokes on the front wheel need adjusting because it is rubbing on the brakes"
posted 2 days ago in Detroit
https://detroit.craigslist.org/okl/b...598952059.html
This is a pretty well sought-after Trek model from 1990. It has some collectable value in addition to being a really solid indestructible frame that is fairly light, strong, and holds its value.
I have screenshotted a current ebay listing for this same bike for $600 (see last pic).
Just last summer this bike was in rideable shape and was a very fast bike. New brakes/cables/housing in summer 2022.
However now the front tube is deflated, and the spokes on the front wheel need adjusting because it is rubbing on the brakes. These are the only issues, besides cosmetics, and the bike is pretty dirty.
Frame size is approximate but very close, I am 5' 7" and the bike is perfect for me.
The frame alone is going for more than what I have this posted for. If you are a bike person you could get this thing zipping in an hour.
If you aren't savvy, it would cost very little (maybe about $50-$100) at a bike shop to get it in good shape that would make it comparable to a $500-$600 bike today.
I don't have the time or interest; the frame is a bit above my pay grade with its collectable value and speed and I am more of a "knock-around" hybrid or mtb kind of person.This is a pretty well sought-after Trek model from 1990. It has some collectable value in addition to being a really solid indestructible frame that is fairly light, strong, and holds its value.
I have screenshotted a current ebay listing for this same bike for $600 (see last pic).
Just last summer this bike was in rideable shape and was a very fast bike. New brakes/cables/housing in summer 2022.
However now the front tube is deflated, and the spokes on the front wheel need adjusting because it is rubbing on the brakes. These are the only issues, besides cosmetics, and the bike is pretty dirty.
Frame size is approximate but very close, I am 5' 7" and the bike is perfect for me.
The frame alone is going for more than what I have this posted for. If you are a bike person you could get this thing zipping in an hour.
If you aren't savvy, it would cost very little (maybe about $50-$100) at a bike shop to get it in good shape that would make it comparable to a $500-$600 bike today.
I don't have the time or interest; the frame is a bit above my pay grade with its collectable value and speed and I am more of a "knock-around" hybrid or mtb kind of person.
** Per seller ** "spokes on the front wheel need adjusting because it is rubbing on the brakes"
posted 2 days ago in Detroit
https://detroit.craigslist.org/okl/b...598952059.html
Trek 420 1990 Vintage Road Touring Bike Needs Light Work 51cm - $79
This is a pretty well sought-after Trek model from 1990. It has some collectable value in addition to being a really solid indestructible frame that is fairly light, strong, and holds its value.
I have screenshotted a current ebay listing for this same bike for $600 (see last pic).
Just last summer this bike was in rideable shape and was a very fast bike. New brakes/cables/housing in summer 2022.
However now the front tube is deflated, and the spokes on the front wheel need adjusting because it is rubbing on the brakes. These are the only issues, besides cosmetics, and the bike is pretty dirty.
Frame size is approximate but very close, I am 5' 7" and the bike is perfect for me.
The frame alone is going for more than what I have this posted for. If you are a bike person you could get this thing zipping in an hour.
If you aren't savvy, it would cost very little (maybe about $50-$100) at a bike shop to get it in good shape that would make it comparable to a $500-$600 bike today.
I don't have the time or interest; the frame is a bit above my pay grade with its collectable value and speed and I am more of a "knock-around" hybrid or mtb kind of person.This is a pretty well sought-after Trek model from 1990. It has some collectable value in addition to being a really solid indestructible frame that is fairly light, strong, and holds its value.
I have screenshotted a current ebay listing for this same bike for $600 (see last pic).
Just last summer this bike was in rideable shape and was a very fast bike. New brakes/cables/housing in summer 2022.
However now the front tube is deflated, and the spokes on the front wheel need adjusting because it is rubbing on the brakes. These are the only issues, besides cosmetics, and the bike is pretty dirty.
Frame size is approximate but very close, I am 5' 7" and the bike is perfect for me.
The frame alone is going for more than what I have this posted for. If you are a bike person you could get this thing zipping in an hour.
If you aren't savvy, it would cost very little (maybe about $50-$100) at a bike shop to get it in good shape that would make it comparable to a $500-$600 bike today.
I don't have the time or interest; the frame is a bit above my pay grade with its collectable value and speed and I am more of a "knock-around" hybrid or mtb kind of person.
Likes For WGB:
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 3,123
Bikes: Panasonic PT-4500, Miele Touring and Batavus Pro
Liked 2,486 Times
in
1,462 Posts
Cheap bike continues.....
posted 13hrs ago nears Athens Texas
https://easttexas.craigslist.org/bik...599480877.html1987 Trek 400 Ellance - $100 (mabank)
bicycle frame material: steel
bicycle type: road
brake type: other/unknown
condition: excellent
electric assist: none
frame size: 58cm
handlebar type: bullhorn
suspension: none (rigid)
wheel size: 700C
posted 13hrs ago nears Athens Texas
https://easttexas.craigslist.org/bik...599480877.html
1987 Trek 400 Ellance - $100 (mabank)
Reynolos 531 steel, 58cm,18 speed, Shimano Deore gearing, Matrix rims, sealed hubs and crank tires are very good, will need a new tube in rear tire, I have a new tube to go with the bike, this bike has been a great rider , I cannot ride anymore, health.
bicycle frame material: steel
bicycle type: road
brake type: other/unknown
condition: excellent
electric assist: none
frame size: 58cm
handlebar type: bullhorn
suspension: none (rigid)
wheel size: 700C
Likes For WGB: