Post pictures of your Hybrid
#7826
IMHO there are zero issues mounting a 42c tire on an 18mm inside width rim ... my (now sold) 26" MTB had 2.2" tires on 19mm rims for years without issues .
40psi seems low to me, maybe you're very light... I'd ride 42c at 45 if not 50psi (being at 75kg / 165lb) , or maybe they have a very sturdy side wall that's keeping its shape better, who knows.
I wouldn't get caught up in the new craze of fatbike wide rims for everything with really low pressures, for some scenarios it may be better, and sometimes it's pointless or just sucks
Then again I still ride my 35C's at 65 psi (minimum recommended on sidewall), .. the bike is used only in the city.
40psi seems low to me, maybe you're very light... I'd ride 42c at 45 if not 50psi (being at 75kg / 165lb) , or maybe they have a very sturdy side wall that's keeping its shape better, who knows.
I wouldn't get caught up in the new craze of fatbike wide rims for everything with really low pressures, for some scenarios it may be better, and sometimes it's pointless or just sucks
Then again I still ride my 35C's at 65 psi (minimum recommended on sidewall), .. the bike is used only in the city.
Last edited by CadenceBoy; 11-15-23 at 04:44 AM.
Likes For CadenceBoy:
#7827
Junior Member
Join Date: Aug 2023
Location: Norcal\San Joaquin County
Posts: 101
Bikes: Specialized Sirrus X 3.0, Trek 700 MultiTrack,Specialized Alibi,Benotto ?
Liked 96 Times
in
54 Posts
IMHO there are zero issues mounting a 42c tire on an 18mm inside width rim ... my (now sold) 26" MTB had 2.2" tires on 19mm rims for years without issues .
40psi seems low to me, maybe you're very light... I'd ride 42c at 45 if not 50psi (being at 75kg / 165lb) , or maybe they have a very sturdy side wall that's keeping its shape better, who knows.
I wouldn't get caught up in the new craze of fatbike wide rims for everything with really low pressures, for some scenarios it may be better, and sometimes it's pointless or just sucks
Then again I still ride my 35C's at 65 psi (minimum recommended on sidewall), .. the bike is used only in the city.
40psi seems low to me, maybe you're very light... I'd ride 42c at 45 if not 50psi (being at 75kg / 165lb) , or maybe they have a very sturdy side wall that's keeping its shape better, who knows.
I wouldn't get caught up in the new craze of fatbike wide rims for everything with really low pressures, for some scenarios it may be better, and sometimes it's pointless or just sucks
Then again I still ride my 35C's at 65 psi (minimum recommended on sidewall), .. the bike is used only in the city.
The Pathfinder's are a soft sidewall. I run the exact tire on my Sirrus. I've been running 40psi in it. I'll try 45 on my next ride. Nope I have no interest in running "Fat tires" That's what came installed on my new Sirrus(700x42) so when I picked up the Alibi I figured I would try the same tire on it. If I didn't like it would have a spare set for the Sirrus. PLUS they were on sale for $26 each. How could I resist LOL.
Thank you for your reply. Enjoy the day
Lee
700x35's are soon to be delivered for my Trek MultiTrack. Fingers crossed they arrive today
Likes For Leebob69:
#7828
Senior Member
Join Date: Mar 2015
Location: Martinsburg WV Area
Posts: 1,716
Bikes: State 4130 Custom, Giant Trance 29
Liked 189 Times
in
127 Posts
My winter project has been delivered today! Over next few months will be setting this up as a flat bar gravel or hybrid. Planning on putting on 650b Wheel/tire combo. Currently have the Chromoly fork, but the carbon fiber one will be delivered in a few days.
Planning on putting my Scott Sub Cross as much as possible back to what it was like when I purchased it. Then selling it this spring.
I have just joined the "Steel is Real" club!
Planning on putting my Scott Sub Cross as much as possible back to what it was like when I purchased it. Then selling it this spring.
I have just joined the "Steel is Real" club!
Likes For JustinHS777:
Likes For Smokinapankake:
#7831
Senior Member
Rebuilt my Giant FCR3500 back into a form close to its original form after running it with bullhorn or drop bars for years. Going to give it to my stepson to ride, but I'm definitely going to have to borrow it from him occasionally because it's still great to ride.
Likes For The Chemist:
#7832
Senior Member
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,915
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Liked 2,747 Times
in
1,468 Posts
Last edited by t2p; 03-15-24 at 03:05 PM.
Likes For t2p:
#7834
Senior Member
Join Date: Jun 2002
Location: San Jose, CA
Posts: 3,886
Bikes: Too many bikes, too little time to ride
Liked 555 Times
in
381 Posts
My uncle in China had one of these. Fun little ride. I haven't seen any FCRs with the head shock here in the US. Curious to see pics of it in drop bar form. Should make for a sweet gravel bike.
Likes For tFUnK:
#7835
Senior Member
Here it is in its final form in my use. Since the frame had a rear disk brake mount, I replaced the fork with a disk fork so I could run full disk brakes. It was a good bike and served me well.
#7836
Full Member
picked up this vintage (early to mid 90's) Mongoose Crossway 850. Nice Tange cromoly frame.
#7837
Senior Member
That Shimano 400CX / 700CX groupset is nice stuff; about on Ultegra level. Only available for a couple years; 93-94 I think. I had some on a Nishiki Optima XRS hybrid for a while. That bike eventually got stripped of the CX parts, rebuilt with lesser components, and moved along its way. At the time it was the only 20t 58mm BCD granny ring you could get. Dig that "corncob"-ish cassette, 11-19t I think. You've got a nice bike there!
Likes For Smokinapankake:
#7838
Newbie
Agreed on the 400CX/700CX groupset. My 93 Univega Via DeOro has an interesting mix of CX. The derailleurs, shifters and crank arms are 700CX while the canti brakes and wheel hubs are 400CX. The cassette is 11-19. Unfortunately the index shifter for the rear had been removed so I am running a friction shifter for the rear. After cleaning up everything and lubrication, the CX components have been flawless. The bike is very smooth shifting and silent running. I don't see a reason to change out anything at this time. the only thing I have thought about changing is the cassette to one that has a bit more range, such as an 11-25 or 11-28. Since the refurb about a year ago I've put over a thousand miles on it with no issues.
Likes For Cgnman59:
#7839
Full Member
Yea I'm happy with the find! I also am digging the colors.
#7840
Senior Member
A good dousing of WD-40 or similar inside the shifter body will free up those pawls and ratchets and stuff. Squirt it in through the shift cable hole and work the shift levers back and forth. Often times what happens is the 30+ year old factory lube gets gummy and sticky. WD is a good solvent for that sort of thing.
#7841
Senior Member
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,915
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Liked 2,747 Times
in
1,468 Posts
momma’s gonna worry I’ve been a bad bad boy …
.
Likes For t2p:
#7843
Newbie
After a year's long absence from bicycling, much of if spent on motorcycles instead, I returned to the fold this Spring with this used Trek Verve 3. Terrific bike. I'm really enjoying it.
Likes For Lockback:
#7844
Senior Member
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,330
Bikes: More than there were awhile ago.
Liked 1,443 Times
in
665 Posts
Just got my latest hybrid build on the road. It's been one of those "on again, off again" builds that I started a LONG time ago.
I started with a NOS Marin Fairfax SC5 frame:
As of today (FINALLY!!!) it looks like this:
I started with a NOS Marin Fairfax SC5 frame:
As of today (FINALLY!!!) it looks like this:
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Likes For Murray Missile:
Likes For guidodg:
#7846
Member
__________________
Living life on the small chainring.
Living life on the small chainring.
Likes For daywood:
#7847
Senior Member
Picked up a Multi Track 750 a few months ago; have been tweaking here and there to make it what I want:
I’m still dialing it in but I think its basically there…
I’m still dialing it in but I think its basically there…
Likes For Smokinapankake:
#7848
Senior Member
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,330
Bikes: More than there were awhile ago.
Liked 1,443 Times
in
665 Posts
I saw the drop bars and brifters and thought, wait a minute: Isn’t that a gravel bike? And then I saw the suspension fork and thought, wait another minute: You don’t usually see that on a gravel bike. To-may-to. To-mah-to. Whatever it is, it looks like it means business, and I like it. Nicely done!
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Likes For Murray Missile: