The frame doesn't fit pass-around game
#1002
BEHOLD! THE MANTICORE!
Is the 950 frame for 26 or 700 wheels? These guys have got me wanting a drop bar MTB
#1003
BEHOLD! THE MANTICORE!
Clyde Barrow sure was a thoughtful young man
#1004
Senior Member
WTT: My Masi frame for your Masi frame
I posted this on A Great Vintage in the past day or two, thought I'd mention it here as well. I have a 1982 Masi Gran Criterium, size SMC58, s/n A8216. I'm looking to trade just the frame for a slightly larger Masi GC frame, size 61-63 (as Masi measured and stamped them), built from the late 70s to early 80s.
There's a bit more detail and links to pix on the AGV listing:
https://agreatvintage.com/home/show-a...-lightweights/
There's a bit more detail and links to pix on the AGV listing:
https://agreatvintage.com/home/show-a...-lightweights/
#1005
Senior Member
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,341
Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T
Liked 529 Times
in
285 Posts
I posted this on A Great Vintage in the past day or two, thought I'd mention it here as well. I have a 1982 Masi Gran Criterium, size SMC58, s/n A8216. I'm looking to trade just the frame for a slightly larger Masi GC frame, size 61-63 (as Masi measured and stamped them), built from the late 70s to early 80s.
There's a bit more detail and links to pix on the AGV listing:
https://agreatvintage.com/home/show-a...-lightweights/
There's a bit more detail and links to pix on the AGV listing:
https://agreatvintage.com/home/show-a...-lightweights/
https://www.bikeforums.net/showthread...Masi-for-trade
__________________
The man who dies with the most toys…is dead. - Rootboy
The man who dies with the most toys…is dead. - Rootboy
#1007
Senior Member
Join Date: Apr 2009
Location: golden, co
Posts: 115
Bikes: 80' Zullo track bike,84 Lotus Legend,91' Nishiki Prestige,91' Fuji sundance
Likes: 0
Liked 1 Time
in
1 Post
I have a 56cm ctt 91 Nishiki prestige. Tange triple butted tubing. It's got a Flite 100 track fork and 1" threadless stem and aheadset. The paint is scratched but no dents and straight. this frame is twitchy as heck and has toe over lap and no eyelets and cant run more than a 25mm tire. So it's basically a track frame with gears, if that's what you like this is it. I'm just tired of it sitting here in my house not being ridden. would trade for an frame in 54 or 56cm or parts I'm not to picky. Pics on request.
#1008
#1009
BEHOLD! THE MANTICORE!
Thanks rotharpunc for the interest! The 950 frame is for 26" wheels. The last time I had the 950 built up, I had it as 3x1 "Tringle" drop bar commuter. I have it in a box that is ready to ship out, the dimensions are 6"x28"x39" and the weight is 15.5 pounds. My zip is 92821 if you want to get a quote on the USPS or FedEx website.
#1012
Senior Member
Join Date: Jul 2012
Location: Mackinac Island, Michigan, USA
Posts: 307
Bikes: 1958 Schwinn Deluxe Spitfire, 2016 Surly Cross Check, 1971 BH Folder, 2016 Felt DD10
Likes: 0
Liked 0 Times
in
0 Posts
#1013
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,812
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Liked 337 Times
in
226 Posts
PedalTraveler,
I don't have a Brooks. The only frames that I have available are a 1976 Fuji Finest, and a mid-eighties(?) Jamis Explorer XR MTB. I don't if either will interest you, so I have attached a couple of photos.
The Fuji has a 21" seat tube, double-butted chrome-moly frame and no braze-ons. The frame was chrome plated and then painted over leaving some chrome exposed. It does have lots of surface rust, and the chrome is pitted. I remember drooling over one back in 1972, when all I could afford was the S-10-S. Anyway, I rescued this one several months ago from a flipper.
The Jamis has an 18" seat tube, but being a MTB, sits a bit larger. The frame is chrome-moly, and the paint is not bad. The right chainstay has some rust due to chain slap I suppose. It has a chainstay mounted rear brake, and a shoulder pad for portaging.
Thanks for the reply.
I don't have a Brooks. The only frames that I have available are a 1976 Fuji Finest, and a mid-eighties(?) Jamis Explorer XR MTB. I don't if either will interest you, so I have attached a couple of photos.
The Fuji has a 21" seat tube, double-butted chrome-moly frame and no braze-ons. The frame was chrome plated and then painted over leaving some chrome exposed. It does have lots of surface rust, and the chrome is pitted. I remember drooling over one back in 1972, when all I could afford was the S-10-S. Anyway, I rescued this one several months ago from a flipper.
The Jamis has an 18" seat tube, but being a MTB, sits a bit larger. The frame is chrome-moly, and the paint is not bad. The right chainstay has some rust due to chain slap I suppose. It has a chainstay mounted rear brake, and a shoulder pad for portaging.
Thanks for the reply.
#1015
Banned.
I have a few frames taking up space:
60cm 1985 Trek 620(blue) - a little rust, plenty of scratches. No dents,dings or bends. Good candidate for a repaint/powdercoat or just build and ride.. original blue rack is included, but it's a little beat up.
60cm Trek 460(orange) - a little rusty, someone spray painted parts of it black, and a stuck stem(will need to be cut out from the inside). Needs repaint/powdercoat
19" Diamondback Ridge Runner II(silver grey) - Part of the seatpost clamp was broken off when I acquired the frame. I had welded back on. Otherwise, it's in good condition with the usual scratches.
Have more to list later as well as pictures
60cm 1985 Trek 620(blue) - a little rust, plenty of scratches. No dents,dings or bends. Good candidate for a repaint/powdercoat or just build and ride.. original blue rack is included, but it's a little beat up.
60cm Trek 460(orange) - a little rusty, someone spray painted parts of it black, and a stuck stem(will need to be cut out from the inside). Needs repaint/powdercoat
19" Diamondback Ridge Runner II(silver grey) - Part of the seatpost clamp was broken off when I acquired the frame. I had welded back on. Otherwise, it's in good condition with the usual scratches.
Have more to list later as well as pictures
#1016
Riding like its 1990
1985 Trek 460 52cm Trek investment lugs
Just stripped it down and cleaned up the frame. Will rebuild shortly for a local who asked about a bike but am willing to trade for something interesting around 59 or 60 ish.
#1017
Senior Member
Join Date: May 2012
Location: Canada
Posts: 137
Likes: 0
Liked 0 Times
in
0 Posts
This is a bit of a long shot, but I've got a 61cm (c-t) 1988 Panasonic DX-4000 frame that I'd like to trade for a 53 or possibly a 56. The long shot part is that the other frame also needs to be a 1988 Panasonic DX-4000.
Edit: If you have a similar quality late 80s frame that fits the size requirements, I might be interested.
Edit: If you have a similar quality late 80s frame that fits the size requirements, I might be interested.
Last edited by ham; 11-07-13 at 12:54 AM.
#1018
Senior Member
Join Date: May 2012
Location: Canada
Posts: 137
Likes: 0
Liked 0 Times
in
0 Posts
Speaking of long shots, I've also got a 58cmx58cm Giant Excursion touring frame (complete with fenders and racks) that I'd like to trade for a real giant; something in the 68-72cm range.
I don't have a pic right now, but here's an identical one belonging to wahoonc.
I don't have a pic right now, but here's an identical one belonging to wahoonc.
Last edited by ham; 11-07-13 at 01:36 PM. Reason: Changed the size
#1019
Riding like its 1990
I've never even seen a 72cm frame let alone a 68cm! Post a pic. All I can imagine is two frames welded together as a tall bike!
Last edited by thenomad; 11-06-13 at 08:11 PM.
#1020
Senior Member
Join Date: May 2012
Location: Canada
Posts: 137
Likes: 0
Liked 0 Times
in
0 Posts
#1021
Senior Member
Good god how tall are you?!?
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
#1023
The Drive Side is Within
I have a 25.5" Trek 620. Would trade for the Giant. I know it's not 68cm, but it's there if you want it. Rough shape. I'd want to add something in the deal.
My Panasonic DX2000 is only 66cm, though!
My Panasonic DX2000 is only 66cm, though!
__________________
The bicycle, the bicycle surely, should always be the vehicle of novelists and poets. Christopher Morley
The bicycle, the bicycle surely, should always be the vehicle of novelists and poets. Christopher Morley
#1024
#1025
Senior Member
Join Date: May 2012
Location: Canada
Posts: 137
Likes: 0
Liked 0 Times
in
0 Posts