ISO and for trade thread part 5
#1376
Senior Member
I believe I've got what I need for Superbe brakes. (Wound up finding a pair of bare recessed calipers on eBay.) Might have a partial long reach pair when I'm done, depending how the mix-n-match process goes.
#1377
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,864
Bikes: roadsters, club bikes, fixed and classic
Liked 2,069 Times
in
1,261 Posts
#1378
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,652
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Liked 2,622 Times
in
1,525 Posts
Thank you! My email reply bounced, so please send a regular, old-fashioned email to tom@noglider.com. Thanks again.
Tom
Tom
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#1379
Senior Member
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,337
Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T
Liked 526 Times
in
284 Posts
I need some small bits for Campagnolo record brake levers. I need one 2037 nut and a pair of the 2038 washers. Used and gross is fine:
__________________
The man who dies with the most toys…is dead. - Rootboy
The man who dies with the most toys…is dead. - Rootboy
#1382
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 3,029
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Liked 2,003 Times
in
1,187 Posts
Joe, I searched for one a few weeks ago on e-bay. I-cycle had one he offered to me for $27. It was Gippeme
#1383
I’ve got the following:
CLB professional front and rear brakes
Campy NR bar end shifters
Campy NR DT shifters
Campy NR front and rear derailleurs ca ‘82
Campy NR Wheelsets x2 Ambrosia rims
Stronglight 93 crankset
Mafac RAID brakeset
RSX STI shifters 7 spd, need cleaning
Windsor Carrera brakes and levers
looking for:
1x groupset for road (clutch derailleur, crankset, 10 spd shifters)
singlespeed setup for vintage MTB - chainring, sprocket, v-brake levers, tensioner.
lets work something out.
CLB professional front and rear brakes
Campy NR bar end shifters
Campy NR DT shifters
Campy NR front and rear derailleurs ca ‘82
Campy NR Wheelsets x2 Ambrosia rims
Stronglight 93 crankset
Mafac RAID brakeset
RSX STI shifters 7 spd, need cleaning
Windsor Carrera brakes and levers
looking for:
1x groupset for road (clutch derailleur, crankset, 10 spd shifters)
singlespeed setup for vintage MTB - chainring, sprocket, v-brake levers, tensioner.
lets work something out.
Last edited by amillhench; 06-23-19 at 10:31 AM.
#1384
Old bikes, Older guy
Join Date: Jun 2014
Location: Fiscal Conservative on the Lefty Coast - Oregon
Posts: 862
Bikes: A few modern, Several vintage, All ridden when weather allows.
Liked 178 Times
in
123 Posts
I’ve got the following:
CLB professional front and rear brakes
Campy NR bar end shifters
Campy NR DT shifters
Campy NR front and rear derailleurs ca ‘82
Campy NR Wheelsets x2 Ambrosia rims
Stronglight 93 crankset
Mafac RAID brakeset
RSX STI shifters 7 spd, need cleaning
Windsor Carrera brakes and levers
lets work something out.
CLB professional front and rear brakes
Campy NR bar end shifters
Campy NR DT shifters
Campy NR front and rear derailleurs ca ‘82
Campy NR Wheelsets x2 Ambrosia rims
Stronglight 93 crankset
Mafac RAID brakeset
RSX STI shifters 7 spd, need cleaning
Windsor Carrera brakes and levers
lets work something out.
I'm interested in your Stronglight 93 Crankset and have some of the parts you are looking for. Will send PM with contact info and details. Also would like more info on crankset, threading, length, condition.
Thanks and regards,
Van
__________________
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
#1386
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,858
Bikes: Several, mostly not name brands.
Liked 3,461 Times
in
1,964 Posts
FWIW, the threaded post on the 2033 lever clamp is standard 6mm x 1mm thread, so pretty much any nut of that thread will work. The 2038 washers might be more of a problem.
#1388
Keener splendor
This one: VeloBase.com - Component: Shimano RD-6207 GS, 600EX (long cage) ?
Aren't they just standard Shimano limit screws?
Aren't they just standard Shimano limit screws?
#1389
Senior Member
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,219
Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso
Liked 1,385 Times
in
731 Posts
This one: VeloBase.com - Component: Shimano RD-6207 GS, 600EX (long cage) ?
Aren't they just standard Shimano limit screws?
Aren't they just standard Shimano limit screws?
__________________
#1390
4.6692016090
Join Date: May 2007
Location: Monterey Peninsula, California
Posts: 1,479
Bikes: yes
Liked 81 Times
in
50 Posts
Claimed by malcala622.
I may have one of what you're looking for -- not sure if correct part number. Héll, I don't even remember where/when I got these.
![](https://live.staticflickr.com/65535/48135170371_3bca9e0b44_c.jpg)
Anyway, the new shiny one in the package is approx. 16.5 mm; the other is used and a different size at approx. 11 mm.
If you can use one or both PM a shipping address.
Also, found these (used) if you need them.
Stan
I may have one of what you're looking for -- not sure if correct part number. Héll, I don't even remember where/when I got these.
![](https://live.staticflickr.com/65535/48135170371_3bca9e0b44_c.jpg)
Anyway, the new shiny one in the package is approx. 16.5 mm; the other is used and a different size at approx. 11 mm.
If you can use one or both PM a shipping address.
Also, found these (used) if you need them.
Stan
![](https://live.staticflickr.com/65535/48135201018_3f69ba9f05_c.jpg)
Last edited by retrofit; 06-27-19 at 04:04 PM.
#1391
Senior Member
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,219
Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso
Liked 1,385 Times
in
731 Posts
I may have one of what you're looking for -- not sure if correct part number. Héll, I don't even remember where/when I got these.
![](https://live.staticflickr.com/65535/48135170371_3bca9e0b44_c.jpg)
Anyway, the new shiny one in the package is approx. 16.5 mm; the other is used and a different size at approx. 11 mm.
If you can use one or both PM a shipping address.
Also, found these (used) if you need them.
Stan
![](https://live.staticflickr.com/65535/48135201018_3f69ba9f05_c.jpg)
![](https://live.staticflickr.com/65535/48135170371_3bca9e0b44_c.jpg)
Anyway, the new shiny one in the package is approx. 16.5 mm; the other is used and a different size at approx. 11 mm.
If you can use one or both PM a shipping address.
Also, found these (used) if you need them.
Stan
![](https://live.staticflickr.com/65535/48135201018_3f69ba9f05_c.jpg)
__________________
#1392
#1393
ISO/WTB two dust caps for my 1950's Lyotard (French) pedals.
The caps should be just over 20mm wide and have an internal thread ( = the readily available MKS dust caps don't fit in my case) - if I'm not mistaken, a suitable replacement would be the octagonal type cap with 'Made In Lyotard France' written on the top, as pictured --> here.
Correct me if I'm wrong - I have seen a couple of pictures of Lyotard pedals with different caps, but nearly all of them have these on so I'm assuming they would fit.
I'm located in Europe (Finland) and am having a hard time finding replacements, so if anyone has some scrap Lyotards laying around with the dust caps still intact.. Would be greatly appreciated!
![](https://cimg0.ibsrv.net/gimg/bikeforums.net-vbulletin/1000x750/pedal1_d5de9dcfe8fad1c623002a07cabd734718d4a287.jpg)
The caps should be just over 20mm wide and have an internal thread ( = the readily available MKS dust caps don't fit in my case) - if I'm not mistaken, a suitable replacement would be the octagonal type cap with 'Made In Lyotard France' written on the top, as pictured --> here.
Correct me if I'm wrong - I have seen a couple of pictures of Lyotard pedals with different caps, but nearly all of them have these on so I'm assuming they would fit.
I'm located in Europe (Finland) and am having a hard time finding replacements, so if anyone has some scrap Lyotards laying around with the dust caps still intact.. Would be greatly appreciated!
![](https://cimg0.ibsrv.net/gimg/bikeforums.net-vbulletin/1000x750/pedal1_d5de9dcfe8fad1c623002a07cabd734718d4a287.jpg)
![](https://cimg1.ibsrv.net/gimg/bikeforums.net-vbulletin/1000x750/pedal2_eed1083617f3a43674bb795c9c1d6230af7d6e02.jpg)
#1394
Senior Member
Join Date: Aug 2014
Location: Bronx, NYC
Posts: 1,885
Bikes: '19 Fuji Gran Fondo 1.5, '72 Peugeot PX10, '71ish Gitane Super Corsa, '78 Fuji Newest, '89 Fuji Ace, '94 Cannondale R600, early '70s LeJeune Pro project
Liked 219 Times
in
101 Posts
ISO/WTB two dust caps for my 1950's Lyotard (French) pedals.
The caps should be just over 20mm wide and have an internal thread ( = the readily available MKS dust caps don't fit in my case) - if I'm not mistaken, a suitable replacement would be the octagonal type cap with 'Made In Lyotard France' written on the top, as pictured --> here.
Correct me if I'm wrong - I have seen a couple of pictures of Lyotard pedals with different caps, but nearly all of them have these on so I'm assuming they would fit.
I'm located in Europe (Finland) and am having a hard time finding replacements, so if anyone has some scrap Lyotards laying around with the dust caps still intact.. Would be greatly appreciated!
![](https://cimg0.ibsrv.net/gimg/bikeforums.net-vbulletin/1000x750/pedal1_d5de9dcfe8fad1c623002a07cabd734718d4a287.jpg)
![](https://cimg1.ibsrv.net/gimg/bikeforums.net-vbulletin/1000x750/pedal2_eed1083617f3a43674bb795c9c1d6230af7d6e02.jpg)
The caps should be just over 20mm wide and have an internal thread ( = the readily available MKS dust caps don't fit in my case) - if I'm not mistaken, a suitable replacement would be the octagonal type cap with 'Made In Lyotard France' written on the top, as pictured --> here.
Correct me if I'm wrong - I have seen a couple of pictures of Lyotard pedals with different caps, but nearly all of them have these on so I'm assuming they would fit.
I'm located in Europe (Finland) and am having a hard time finding replacements, so if anyone has some scrap Lyotards laying around with the dust caps still intact.. Would be greatly appreciated!
![](https://cimg0.ibsrv.net/gimg/bikeforums.net-vbulletin/1000x750/pedal1_d5de9dcfe8fad1c623002a07cabd734718d4a287.jpg)
![](https://cimg1.ibsrv.net/gimg/bikeforums.net-vbulletin/1000x750/pedal2_eed1083617f3a43674bb795c9c1d6230af7d6e02.jpg)
Likes For greg3rd48:
#1395
Senior Member
I could use a set of nutted, long reach Superbe brakes if they become available.
#1398
Senior Member
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,337
Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T
Liked 526 Times
in
284 Posts
Thanks,
-J
![](https://cimg9.ibsrv.net/gimg/bikeforums.net-vbulletin/1400x787/superbe1_3103e2aa9c897a4483a10ceab3790f6f68d6580c.jpg)
![](https://cimg0.ibsrv.net/gimg/bikeforums.net-vbulletin/1400x835/superbe2_cc21b5e0054e0ef48ebd4e304bc0a899980311d2.jpg)
![](https://cimg1.ibsrv.net/gimg/bikeforums.net-vbulletin/1400x707/superbe_levers_0d6b07f89b6f71f7d2e78b03ebf7a1668d6eb209.jpg)
__________________
The man who dies with the most toys…is dead. - Rootboy
The man who dies with the most toys…is dead. - Rootboy
#1400
Senior Member
nevermind, anatomica acquired!
Last edited by t_e_r_r_y; 07-16-19 at 01:42 PM.