I'm curious - why frame bags versus water bottle cages?
#151
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,700
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Liked 4,537 Times
in
2,522 Posts
I guess when everything had to be as light and fast as possible, narrow rims that can’t seat wider tires was the norm. So why design frames with more clearance.
Then came MTB’s and 130, 135mm hubs (where are we at now?)
I still think of 32mm as ’wide’, but have ordered 37mm for my Volpe which should arrive any day soon. 37mm is getting into balloon-tractor-sand territory in my world! 😆
Then came MTB’s and 130, 135mm hubs (where are we at now?)
I still think of 32mm as ’wide’, but have ordered 37mm for my Volpe which should arrive any day soon. 37mm is getting into balloon-tractor-sand territory in my world! 😆
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Likes For cyccommute:
#152
aka Timi
Old road bikes didn’t really come with that narrow a tire. For touring bikes, 1 1/4” (32mm) tires were OEM. “Racier” touring tires were 1 1/8” (28mm). Even race bikes tended towards tires that were 1”(25mm). I recall putting on 3/4” (19mm) razor blades on one of my bikes and those were extremely narrow for the day.
#153
Senior Member
Join Date: Apr 2010
Location: Elevation 666m Edmonton Canada
Posts: 2,570
Bikes: 2013 Custom SA5w / Rohloff Tourster
Liked 368 Times
in
274 Posts
MSN's yellow Thorn bike is 100% a hard tail MTB, yah used for off road mountainous touring. ZERO in common with gravel bike. << Knobby balloon tire 26er with flat bars, steep sloped unisex frame and bungie fork.
Hybrid has become a jack/ joke of all bikes term, completely useless. At first a hybrid was like that Thorn, but with 700 x 37 tires NOT knobby, straight bars, adjustable stem, alu steep sloped frame and 3x8. Now they call any bike not a race bike a hybrid, more likely to have 700 x 28 tires. As in a poor man's triathloner/ randonneur.
Gravel = 650B or 700c 35 to 50 mm mix tread tires, less slope frame, load mounts, 1x or 2x, and drops.
Hybrid has become a jack/ joke of all bikes term, completely useless. At first a hybrid was like that Thorn, but with 700 x 37 tires NOT knobby, straight bars, adjustable stem, alu steep sloped frame and 3x8. Now they call any bike not a race bike a hybrid, more likely to have 700 x 28 tires. As in a poor man's triathloner/ randonneur.
Gravel = 650B or 700c 35 to 50 mm mix tread tires, less slope frame, load mounts, 1x or 2x, and drops.
Last edited by GamblerGORD53; 05-21-24 at 10:05 AM.
#154
I have never understood why road bikes had to have frames that only allowed really skinny tires. Although that did improve slightly over the past decade or two, my road bike that I bought in 2018 has room for 28mm tires without fenders, which was an improvement over the earlier bikes. One positive thing about the gravel craze is that you have a bike that is capable of being a good road bike with clearance for wider tires.
I have thought for years about a fork with two droputs, for different trail for different tires and loading conditions. Recently someone posted of a bike with a fork with an eccentric dropout insert, to change the trail by simply reversing the insert. Smart. I hope that becomes common in the industry.