2022 Post your Single Speed and Fixed Gear Thread
#151
Go Ride!
Join Date: May 2019
Location: Minnesota—55346
Posts: 274
Bikes: Klein Quantum Pro, Klein Attitude, Azuki SS, Merckx AXM, Klein Quantum Race, Klein Quantum
Liked 160 Times
in
90 Posts
Only time i’ve seen anything like it is on courier bikes so they can lock them up anywhere, leaning on anything, and not beat up the paint.
Likes For Sonofamechanic:
#152
Senior Member
Join Date: Jul 2015
Location: Seal Beach Ca. On the right , next to Long Beach
Posts: 1,815
Bikes: 86' Centurion Ironman
Liked 316 Times
in
175 Posts
This started out as a Cannondale SR300 road bike from the 80's. When I got it , it was just a frame and fork . First task was to make the track forks , I cut around the drop outs (they were vertical) I left the radius where the axle sits so I didn't disturb the original geometry and then welded in the horizontal bars . Next was to make it 120mm spacing , I made some cuts to the seat and chain stays and it folded together a 120mm spacer was used and then of course welded up . This was doable for me because I found a welder close by and I have a mini lathe with a milling attachment .
I hope you like it , Mark .
IMG_0898 by mark westi, on Flickr
IMG_0881 by mark westi, on Flickr
I hope you like it , Mark .
IMG_0898 by mark westi, on Flickr
IMG_0881 by mark westi, on Flickr
Likes For markwesti:
#156
enginerd
175mm (6'5") and 40-20. This frame has a pretty high BB (58mm BB drop) plus my tires measure 40mm inflated so I have tons of clearance.
#157
Go Ride!
Join Date: May 2019
Location: Minnesota—55346
Posts: 274
Bikes: Klein Quantum Pro, Klein Attitude, Azuki SS, Merckx AXM, Klein Quantum Race, Klein Quantum
Liked 160 Times
in
90 Posts
Nice! But 40-20…then that just has to be a freewheel? Your legs would spin off going down those hills if it was a fixie! Either way, nice set up—it sure looks to be fun!
Likes For EnzoRWD:
Likes For Regulatori:
#163
Henderson, NV
Join Date: Jan 2022
Location: Henderson/Las Vegas NV
Posts: 588
Bikes: Trek Alpha 3700, GT STS DH, Raleigh Grand Prix, Fisher Montare, Fisher CR-7, Fisher Aquila, Diamondback Sorrento, The Bike Beat Revolution, KHS XC 504R
Liked 654 Times
in
322 Posts
So I picked up this cheap fixed gear for not much on a whim.
I brought it home, pumped up the tires, rolled it out of the garage and promptly when over the bars,,,,
I forgot that you can't push out of the garage, put a foot on the pedal, and.....coast. NOPE. Not a freewheel.
Hopped on the pedal, bike stopped and I promptly did a faceplant...oops. I'm okay though....I may flip the rear to a freewheel and add a U brake.
I brought it home, pumped up the tires, rolled it out of the garage and promptly when over the bars,,,,
I forgot that you can't push out of the garage, put a foot on the pedal, and.....coast. NOPE. Not a freewheel.
Hopped on the pedal, bike stopped and I promptly did a faceplant...oops. I'm okay though....I may flip the rear to a freewheel and add a U brake.
Likes For d1961:
Likes For Senrab62:
Likes For JJScaliger:
#167
Newbie
Recently did a full rebuild on my 1980s Serotta Club Special:
Thanks for looking and ride safe
Thanks for looking and ride safe
Likes For geomiko:
Likes For th3realmckay:
#169
Senior Member
Join Date: Sep 2012
Location: SoCal
Posts: 1,186
Bikes: 2016 Surly Cross Check, 2019 Kona Rove ST
Liked 313 Times
in
211 Posts
Yet another configuration of my Cross Check--just went back to singlespeed/drop bars and loving it. Ritchey Ergomax bars, Gevenalle brake levers. Mostly trail riding, lotsa hills, 34x18 currently.
Likes For pbass:
Likes For Swampthing:
#171
Senior Member
Join Date: Sep 2017
Location: Greenville SC
Posts: 4,188
Bikes: 1975 Motobecane Grand Jubile, 2020 Holdsworth Competition, 2022 Giant Trance 29 3
Liked 3,776 Times
in
1,276 Posts
This frame has been hanging for a year or so. Built a new wheelset with Origin8 hubs and H Plus Son TB14 rims, and recruited an amalgamation of new and vintage parts to complete the build.
Needs some tweaking but overall I'm quite happy. Especially with the wheelset and how shiny everything is
Happy International Singlespeed Day!
Needs some tweaking but overall I'm quite happy. Especially with the wheelset and how shiny everything is
Happy International Singlespeed Day!
Likes For abshipp:
Likes For Sonofamechanic:
#173
Full Member
New to me bike in 2022! I swapped the old heavy wheels for these h plus sons, added mash toe cages, swapped the saddle and of course added this rack!
Likes For Wallonthefloor: