Totally Tubular
#2051
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,712
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1954 Post(s)
Liked 2,022 Times
in
1,115 Posts
I don't use Stan's or any equivalent but I did start carrying more cartridges after have 2 flats (with replacement tube) and a loss of air during one 11 mile commute to work. Didn't want to be late. Fixed it at the desk later in the day and used my pump to get it good enough to get to work with 4 stops to pump up far enough and riding on the handlebars to reduce weight on the rear tire. Semi-slow leak.
OH! does this belong in the "I hate flat tires" thread?
OH! does this belong in the "I hate flat tires" thread?
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#2052
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,216 Times
in
1,103 Posts
My example was about flats using a clincher as a vehicle for discussion.
I have used Tire Alert. Great way to salvage a good case with good tread. They replace the tube and sew it up. Looks great when you get it back. Some people save up their flats and get a discount with bulk service.
I have used Tire Alert. Great way to salvage a good case with good tread. They replace the tube and sew it up. Looks great when you get it back. Some people save up their flats and get a discount with bulk service.
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#2053
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,854
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 2342 Post(s)
Liked 2,843 Times
in
1,548 Posts
just to note that over time it will dry up in the little pouch..... but I have had good luck with caffelatex in both tubies and clinchers..... but to am pretty sure so far it is only the clinchers (conti 5000 with conti race lite butl tube) that have had little ouchies that sealed.
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#2054
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,922
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1803 Post(s)
Liked 2,336 Times
in
1,379 Posts
Help me as I am not having fun riding clinchers!!!
I have been riding with tubulars and being a big lad, I kept having to get them trued Any bump and spokes would loosen and back they'd go. Ye local wheel builder said my rims (Nisi) were too light and that I needed a more rigid wheel. To that end I have acquired a 40 hole rear hub and a 36 hole front hub for the next build.
I'm trying to find a strong 40 hole tubular rim. I've even looked for tandem rims but no luck. (I did buy a 40 hole rim only to have a 48 shipped to me and that 48 was a very light weight track rim). I'd like to use tubulars for small scale touring as well
Anybody have any specific rim they'd recommend? And a source for such a rim???
I have been riding with tubulars and being a big lad, I kept having to get them trued Any bump and spokes would loosen and back they'd go. Ye local wheel builder said my rims (Nisi) were too light and that I needed a more rigid wheel. To that end I have acquired a 40 hole rear hub and a 36 hole front hub for the next build.
I'm trying to find a strong 40 hole tubular rim. I've even looked for tandem rims but no luck. (I did buy a 40 hole rim only to have a 48 shipped to me and that 48 was a very light weight track rim). I'd like to use tubulars for small scale touring as well
Anybody have any specific rim they'd recommend? And a source for such a rim???
Last edited by WGB; 08-05-21 at 08:49 PM.
#2055
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,002
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4340 Post(s)
Liked 2,985 Times
in
1,621 Posts
#2056
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,922
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1803 Post(s)
Liked 2,336 Times
in
1,379 Posts
DiabloScott Link??
I agree $150 a piece is high but since there is a very very limited marked seller might be open to offers...
I agree $150 a piece is high but since there is a very very limited marked seller might be open to offers...
#2057
Le savonnier
Join Date: Sep 2016
Location: Oregon
Posts: 1,422
Bikes: I can count 'em on one hand
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 602 Times
in
274 Posts
Purchased a 70s Motobecane Grand Record with Conti Giros on Mavic GP4 wheels/Campy hubs. Thought for sure I would need to replace them, but turns out they are in great shape. Verified by quick 20 mile spin. Where do they fall in the hierarchy of tubulars?
#2058
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,712
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1954 Post(s)
Liked 2,022 Times
in
1,115 Posts
Oh oh!
I just went to the Mavic site and it seems that they no
longer make tubular rims. I built wheels with these and they do crazy single track stuff without needing truing. https://ciclicorsa.com/shop/ambrosio...s-tubular-rim/
longer make tubular rims. I built wheels with these and they do crazy single track stuff without needing truing. https://ciclicorsa.com/shop/ambrosio...s-tubular-rim/
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#2059
Senior Member
Join Date: Dec 2015
Location: San Diego
Posts: 708
Bikes: 1978 Bruce Gordon, 1977 Lippy, 199? Lippy tandem, Bike Friday NWT, 1982 Trek 720, 2012 Rivendell Atlantis, 1983 Bianchi Specialissima?
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 346 Post(s)
Liked 177 Times
in
109 Posts
Help me as I am not having fun riding clinchers!!!
I have been riding with tubulars and being a big lad, I kept having to get them trued Any bump and spokes would loosen and back they'd go. Ye local wheel builder said my rims (Nisi) were too light and that I needed a more rigid wheel. To that end I have acquired a 40 hole rear hub and a 36 hole front hub for the next build.
I'm trying to find a strong 40 hole tubular rim. I've even looked for tandem rims but no luck. (I did buy a 40 hole rim only to have a 48 shipped to me and that 48 was a very light weight track rim). I'd like to use tubulars for small scale touring as well
Anybody have any specific rim they'd recommend? And a source for such a rim???
I have been riding with tubulars and being a big lad, I kept having to get them trued Any bump and spokes would loosen and back they'd go. Ye local wheel builder said my rims (Nisi) were too light and that I needed a more rigid wheel. To that end I have acquired a 40 hole rear hub and a 36 hole front hub for the next build.
I'm trying to find a strong 40 hole tubular rim. I've even looked for tandem rims but no luck. (I did buy a 40 hole rim only to have a 48 shipped to me and that 48 was a very light weight track rim). I'd like to use tubulars for small scale touring as well
Anybody have any specific rim they'd recommend? And a source for such a rim???
#2060
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,630
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,571 Times
in
1,579 Posts
I just went to the Mavic site and it seems that they no
longer make tubular rims. I built wheels with these and they do crazy single track stuff without needing truing. https://ciclicorsa.com/shop/ambrosio...s-tubular-rim/
longer make tubular rims. I built wheels with these and they do crazy single track stuff without needing truing. https://ciclicorsa.com/shop/ambrosio...s-tubular-rim/
I see a few European shops still have a few...
#2061
If I own it, I ride it
Join Date: Nov 2005
Location: Cardinal Country
Posts: 5,585
Bikes: Lejeune(14), Raleigh, Raysport, Jan De Reus, Gazelle, Masi, B. Carré(4), Springfield, Greg Lemond, Andre Bertin, Schwinn Paramount
Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 593 Post(s)
Likes: 0
Liked 663 Times
in
312 Posts
S Works Hell of the North tubulars on eBay
If you are wanting to dip your toes into the waters of upper end tubulars, this could be your chance. This is the second time through for these with no bid first time around. I am well stocked else I would not be sharing.
If you are wanting to dip your toes into the waters of upper end tubulars, this could be your chance. This is the second time through for these with no bid first time around. I am well stocked else I would not be sharing.
#2062
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,712
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1954 Post(s)
Liked 2,022 Times
in
1,115 Posts
No more Open Pro T? https://www.mavic.com/en-us/open-pro-t-j24100.html
I see a few European shops still have a few...
I see a few European shops still have a few...
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#2063
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,002
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4340 Post(s)
Liked 2,985 Times
in
1,621 Posts
DiabloScott Link??
I agree $150 a piece is high but since there is a very very limited marked seller might be open to offers...
I agree $150 a piece is high but since there is a very very limited marked seller might be open to offers...
This listing has ended.
I just intended to find a brand that made 40h tubular rims because I've hardly seen any, thinking you could search on Nisi Campione del Mondo 40 hole tubular and see if you could find them anywhere.
You might try some professional wheel builder sites and just ask them if they can get such a rim for you.
Originally Posted by JohnnyAce
Where do they fall in the hierarchy of tubulars?
#2064
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,854
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 2342 Post(s)
Liked 2,843 Times
in
1,548 Posts
Help me as I am not having fun riding clinchers!!!
I have been riding with tubulars and being a big lad, I kept having to get them trued Any bump and spokes would loosen and back they'd go. Ye local wheel builder said my rims (Nisi) were too light and that I needed a more rigid wheel. To that end I have acquired a 40 hole rear hub and a 36 hole front hub for the next build.
I'm trying to find a strong 40 hole tubular rim. I've even looked for tandem rims but no luck. (I did buy a 40 hole rim only to have a 48 shipped to me and that 48 was a very light weight track rim). I'd like to use tubulars for small scale touring as well
Anybody have any specific rim they'd recommend? And a source for such a rim???
I have been riding with tubulars and being a big lad, I kept having to get them trued Any bump and spokes would loosen and back they'd go. Ye local wheel builder said my rims (Nisi) were too light and that I needed a more rigid wheel. To that end I have acquired a 40 hole rear hub and a 36 hole front hub for the next build.
I'm trying to find a strong 40 hole tubular rim. I've even looked for tandem rims but no luck. (I did buy a 40 hole rim only to have a 48 shipped to me and that 48 was a very light weight track rim). I'd like to use tubulars for small scale touring as well
Anybody have any specific rim they'd recommend? And a source for such a rim???
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#2065
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,922
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1803 Post(s)
Liked 2,336 Times
in
1,379 Posts
Thanks all!
Have one NOS GPS 4 is sight (well in Toronto anyway), another fellow selling bike stuff on FB told me he gave away 3 40 hole rims as no one wanted them! He might be able to get one back and lastly @bertinjim found one in France that's 48EU + shipping. Good times beckon!
Have one NOS GPS 4 is sight (well in Toronto anyway), another fellow selling bike stuff on FB told me he gave away 3 40 hole rims as no one wanted them! He might be able to get one back and lastly @bertinjim found one in France that's 48EU + shipping. Good times beckon!
Likes For WGB:
#2066
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,712
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1954 Post(s)
Liked 2,022 Times
in
1,115 Posts
I've never ridden the Giros but I am a Continental Tubular Fan. I imagine the Giro rides much like the Vittoria Rally which is rather harsh. When the rear Giro needs replacing, consider replacing both with Continental Sprinters (not Gatorskin) and using the front for a spare. Love your Joe Bell Motobecane.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Likes For Classtime:
#2067
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,346
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3907 Post(s)
Liked 4,854 Times
in
2,240 Posts
@johnnyace - Conti's Giro tubular is the low end of their offering. Like you, I bought a wheelset with older Giro tires (23mm) , but in seemingly good shape. Put several hundred miles before the rear tire started to show some sidewall concerns. I replaced it with a Veloflex 25mm. The Giro front tire is still going strong. @Classtime is right about a stiff (harsh?) ride but at 23mm and cheap what should one expect?!? I find Vittoria Rally's cotton casing to be a smoother ride, but it does not have the durability of the Giro, and - at least in the past (in my experience) some of the tires were 'lumpy'. Buy 3 = 2 would be OK, 1 emergency spare. All the tires I buy new are the more expensive ones from several companies. Liking VeloFlex and Vittoria, with Conti a close third. Bought some Challenge Elite ( from a BFer ) and will try those soon.
On a different note - have several bikes with really worn tubulars. Glued up a Conti Sprinter 22mm, Vittoria Corsa 25mm and VeloFlex Arenberg 25mm - but Holy Crap - forgot to pre-stretch any of them. The Arenberg was easiest to mount, the Vittoria Corsa was hard but doable, the Conti Sprinter would not go on. It is now on a rim stretching and will need new glue.
Almost done with the last can of mastik - I will soon be a tubular tape guy.
On a different note - have several bikes with really worn tubulars. Glued up a Conti Sprinter 22mm, Vittoria Corsa 25mm and VeloFlex Arenberg 25mm - but Holy Crap - forgot to pre-stretch any of them. The Arenberg was easiest to mount, the Vittoria Corsa was hard but doable, the Conti Sprinter would not go on. It is now on a rim stretching and will need new glue.
Almost done with the last can of mastik - I will soon be a tubular tape guy.
Last edited by Wildwood; 08-11-21 at 12:07 PM.
#2068
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,346
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3907 Post(s)
Liked 4,854 Times
in
2,240 Posts
Sorry to have missed this post - my opinion
I have experience with Stans and OrangeSeal in tubular tires with latex - sized 24-28mm (the 22mm & 30mm are butyl tubes) from VeloFlex, Vittoria, Specialized. Approximately 1 ounce of Stans in new tires kept me flat free for 4 years, road with some mixed surfaces of trail.. Maybe that was Lady Luck, low mileage across several bikes, or Stans -- certainly the Stans seems not to have degraded the latex tubes ability to hold air, over 4 years..
As the Stans got used, I bought a large bottle of Orange Seal. I squirted it into the higher mileage tires annually. After all, I had been flat free, must work. Problem was that monitoring the amount dispensed from a 20oz bottle proved difficult.. [Stans had been in the 2oz bottles]. The valves got a bit messy and after a couple of very recent flats on worn (but not worn out) tires I cut open a VeloFlex and found a mess inside the tube. No way to diagnose the cause of the flat. Outer tread showed no obvious cuts or lodged debris. I guess there is a chance the combination of Stans initially and OrangeSeal subsequently degraded the latex tube, but more likely something from the gravel trail i had been riding.
My new philosophy after 4 years experience with sealants in quality tubulars is this:
1. Do not use sealant in new tires.
2. Carry a small and measure-able quantity for roadside repairs - such as 2oz bottle.
3. Use sealant sparingly
4. If the sealant does not work roadside, be sure to have a spare tire.
5. Carry tape to avoid problems with pre-glued spares.
edit: and don't let your stored sealant in the bottle(s) get more than 2-3 yrs old even when stored in a basement.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Last edited by Wildwood; 08-11-21 at 02:35 PM.
#2069
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,810
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3597 Post(s)
Liked 3,418 Times
in
1,944 Posts
like @Wildwood, I have been using Stan's in tubulars for several years without problems. Not fancy tires, thoug; just YJ "Servizio Corse," Hutchinson "Tempos" and such like. But it can be tricky getting Stan's into a tire that lacks a removable valve core. At home, I use a syringe and plastic tubing pressed over the valve stem, and a needle-nose pliers to lift the knurled nut to open the valve while I inject the sealant. That's too much stuff and bother to carry on the road, so I bring a spare in case I flat.
That said, has anyone tried this Velox stuff? It's in a pressurized can, with a chuck to fit onto the valve stem. I picked up a can, just to see, but haven't had an opportunity to use it yet (nor am I in any particular hurry to do so ):
That said, has anyone tried this Velox stuff? It's in a pressurized can, with a chuck to fit onto the valve stem. I picked up a can, just to see, but haven't had an opportunity to use it yet (nor am I in any particular hurry to do so ):
#2070
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,346
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3907 Post(s)
Liked 4,854 Times
in
2,240 Posts
Clarification of my above.
I have only used liquid latex type sealants listed as appropriate for tubulars and inserted into valves with removable cores (removed, then reinserted).
And I have zero experience with newer tubeless rims/tires and sealant. And no intention to go that way, at least on the road bikes.
I have only used liquid latex type sealants listed as appropriate for tubulars and inserted into valves with removable cores (removed, then reinserted).
And I have zero experience with newer tubeless rims/tires and sealant. And no intention to go that way, at least on the road bikes.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#2071
Senior Member
Join Date: Jul 2008
Location: Minas Ithil
Posts: 9,173
Mentioned: 66 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 641 Times
in
398 Posts
I personally enjoy the whole process of gluing and can do it quick anyway.
Last edited by Lazyass; 08-12-21 at 02:41 AM.
#2072
Senior Member
Join Date: Dec 2015
Location: San Diego
Posts: 708
Bikes: 1978 Bruce Gordon, 1977 Lippy, 199? Lippy tandem, Bike Friday NWT, 1982 Trek 720, 2012 Rivendell Atlantis, 1983 Bianchi Specialissima?
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 346 Post(s)
Liked 177 Times
in
109 Posts
Help me as I am not having fun riding clinchers!!!
I have been riding with tubulars and being a big lad, I kept having to get them trued Any bump and spokes would loosen and back they'd go. Ye local wheel builder said my rims (Nisi) were too light and that I needed a more rigid wheel. To that end I have acquired a 40 hole rear hub and a 36 hole front hub for the next build.
I'm trying to find a strong 40 hole tubular rim. I've even looked for tandem rims but no luck. (I did buy a 40 hole rim only to have a 48 shipped to me and that 48 was a very light weight track rim). I'd like to use tubulars for small scale touring as well
Anybody have any specific rim they'd recommend? And a source for such a rim???
I have been riding with tubulars and being a big lad, I kept having to get them trued Any bump and spokes would loosen and back they'd go. Ye local wheel builder said my rims (Nisi) were too light and that I needed a more rigid wheel. To that end I have acquired a 40 hole rear hub and a 36 hole front hub for the next build.
I'm trying to find a strong 40 hole tubular rim. I've even looked for tandem rims but no luck. (I did buy a 40 hole rim only to have a 48 shipped to me and that 48 was a very light weight track rim). I'd like to use tubulars for small scale touring as well
Anybody have any specific rim they'd recommend? And a source for such a rim???
#2073
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,712
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1954 Post(s)
Liked 2,022 Times
in
1,115 Posts
be aware that the Major Toms are wide and are inappropriate for 25mm or less tires. I built some for CX and thought I might use them also for road rides with 25s and the radius of the MT was too large for a good gluing.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#2074
Senior Member
Join Date: Sep 2014
Location: Baton Rouge La
Posts: 1,214
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 394 Post(s)
Liked 346 Times
in
230 Posts
I have a question that I'm sure some here could answer. I have a set of tubulars that I plan to mount with Jantex Competition 76 tape. Many years ago I rode tubulars for a while that I mounted with glue. I had a spare that was pre-glued. Now, if I flat with tape, and I take off my tire, and the tape stays on the tire, can I reasonably safely ride home on a un-glued & un-taped spare if I take it easy? No fast downhills or fast cornering on the way home. I'm thinking that I'd rather not try to do a tape job on the side of the road and I'd like to take off the spare and replace it with either the repaired flat or a new tire when I get home. Am I crazy? Lets assume I don't have sealant with me or it doesn't seal the puncture. Thanks for any advice.
#2075
Senior Member
Join Date: Dec 2015
Location: San Diego
Posts: 708
Bikes: 1978 Bruce Gordon, 1977 Lippy, 199? Lippy tandem, Bike Friday NWT, 1982 Trek 720, 2012 Rivendell Atlantis, 1983 Bianchi Specialissima?
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 346 Post(s)
Liked 177 Times
in
109 Posts
I am aware. I don't generally ride anything under 28 and have used Major Tom's on three previous builds.