ISO and for trade thread part 5
#4876
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,735
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2155 Post(s)
Liked 3,406 Times
in
1,206 Posts
The generosity of some people on this forum never ceases to amaze and impress me.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
Likes For rccardr:
#4877
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,829
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2444 Post(s)
Liked 3,137 Times
in
1,976 Posts
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#4878
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,829
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2444 Post(s)
Liked 3,137 Times
in
1,976 Posts
Might have to find a splined BB,but if you want any of them, just send me an address.
40 tooth
42 tooth.
40 tooth
42 tooth.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#4879
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,252
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 823 Post(s)
Liked 1,395 Times
in
694 Posts
My thanks to all of you! Madhonk is hooking me up, and I hope to get this rascal running soon!
#4880
Senior Member
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,828
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1873 Post(s)
Liked 692 Times
in
468 Posts
I need a pair of (newer) black brake calipers in good shape. Think OEM, Tektro, Axis, etc.
I also need a newer braze on Shimano FD, like 4700 Tiagra or 11s 105/Ultegra.
I have a pair of 6600 silver Ultegra calipers I can trade.
I also need a newer braze on Shimano FD, like 4700 Tiagra or 11s 105/Ultegra.
I have a pair of 6600 silver Ultegra calipers I can trade.
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
#4881
Senior Member
Join Date: Jan 2010
Location: Georgia
Posts: 748
Bikes: I don't even
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 81 Post(s)
Liked 193 Times
in
77 Posts
ISO rigid MTB frameset with 23" or longer top tube. something full chromo?
For trade: 25" 1983 Trek 520 frameset, 61cm? 1992 Diamonback Expert TG frameset
For trade: 25" 1983 Trek 520 frameset, 61cm? 1992 Diamonback Expert TG frameset
Last edited by theblackbullet; 06-01-22 at 07:46 AM.
Likes For theblackbullet:
#4882
Senior Member
Join Date: Mar 2014
Location: City of Angels
Posts: 4,870
Bikes: A few too many
Mentioned: 42 Post(s)
Tagged: 1 Thread(s)
Quoted: 1364 Post(s)
Liked 2,182 Times
in
1,184 Posts
Hello, I am trying to source parts for a long overdue build and am looking for a BB for a triple anyone have a spare that they care to sell?
From Velobase.
Please PM if you have anything.
Best, Ben
From Velobase.
Please PM if you have anything.
Best, Ben
__________________
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
#4883
Senior Member
Join Date: Jun 2021
Posts: 1,683
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 761 Post(s)
Liked 1,563 Times
in
757 Posts
ISO Simplex long-cage RD
ISO/WTB Long-cage, drop-out hanger mount (ie not 'claw'), Simplex RD- SLJ, SX???....
thx
thx
#4884
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,829
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2444 Post(s)
Liked 3,137 Times
in
1,976 Posts
Edit: I see the 70 marking so Italian.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#4885
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,801
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times
in
225 Posts
ISO Suntour XC shifter
Like this one, but for the front deraileur, left side. Have stuff to trade and money.
Sorry about the focus.
Sorry about the focus.
#4886
Full Member
Join Date: Apr 2018
Location: Hitsville USA
Posts: 261
Bikes: 50s, 60s, 70s Nottingham/Worksop bikes, becanes, Gitane, Bertin, Lion of Sochaux
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 145 Post(s)
Liked 120 Times
in
75 Posts
ISO : Orphan Mafac Course Drilled lever
ISO orphan Mafac lever drilled (or a set of levers) . This one was bent in a tumble. Being a critical component and Al , I’m afraid to bend it back. Have stuff and Fiat money.
Last edited by Slowride79; 06-08-22 at 08:11 PM.
#4887
Senior Member
ISO Pair of Shimano Caliper Spring Sleeves for BR-1050
I have a pair of Shimano BR-1050 brake calipers with corresponding brake levers inbound for a vintage build. One caliper is missing the small plastic caliper spring sleeves.
I've attached a partial exploded view with the part outlined in red. The Shimano part number, per old Shimano documentation, was at one time 83E 0900.
Annotated extract from Shimano documentation.
This same part was used on a number of Shimano brakelevers calipers from the late 1980s/early 1990s, including BR-1055, BR-A250, BR-A450, BR-6400 and BR-6403. I'd guess it was probably used on many other Shimano side-pull calipers as well, but those are the ones I found in a quick search of Shimano documentation which used the same part.
I'm having zero luck finding these via Internet search. (I suspect Shimano either discontinued them or changed the part number, but in the latter case I have no idea what the new part number would be.) While they may not be absolutely necessary - and I can probably fabricate some form of workable substitute if I have to - I'd prefer to use the correct part on this build.
If anyone out there knows a source for a pair of these - or a source for a trashed caliper that has a good pair of these spring sleeves - I'd be much obliged if you could PM me. Don't have much useful for trade, but am willing to consider purchase to include S/H. Thanks.
Edited to Add: delbiker1 is sending me the spring sleeves in question. Assuming the USPS doesn't destroy them in shipment, should be no further need for assistance here.
The generosity of members here - with both time and parts - is truly amazing.
I've attached a partial exploded view with the part outlined in red. The Shimano part number, per old Shimano documentation, was at one time 83E 0900.
Annotated extract from Shimano documentation.
This same part was used on a number of Shimano brake
I'm having zero luck finding these via Internet search. (I suspect Shimano either discontinued them or changed the part number, but in the latter case I have no idea what the new part number would be.) While they may not be absolutely necessary - and I can probably fabricate some form of workable substitute if I have to - I'd prefer to use the correct part on this build.
If anyone out there knows a source for a pair of these - or a source for a trashed caliper that has a good pair of these spring sleeves - I'd be much obliged if you could PM me. Don't have much useful for trade, but am willing to consider purchase to include S/H. Thanks.
Edited to Add: delbiker1 is sending me the spring sleeves in question. Assuming the USPS doesn't destroy them in shipment, should be no further need for assistance here.
The generosity of members here - with both time and parts - is truly amazing.
Last edited by Hondo6; 07-05-22 at 04:22 PM. Reason: correct typos
#4888
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,735
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2155 Post(s)
Liked 3,406 Times
in
1,206 Posts
Suspect you are SOL on finding those. After almost 35 years, even new ones would be hard and likely to split.
What I use as replacements are short sections of cable housing lining. Come in grey and white, both do the job.
What I use as replacements are short sections of cable housing lining. Come in grey and white, both do the job.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#4889
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,118
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 854 Post(s)
Liked 1,438 Times
in
819 Posts
@Hondo6, PM me. I have one 1050 caliper with those. You are welcome to them. I just pulled them off and they are fine. The other one has housing sections as mention above.
#4890
Senior Member
In case "Henry Hulk-hands" at the USPS destroys the set of sleeves being sent to me and I have to go this route: does the cable housing type particularly matter? That is, do I need old-style spiral metal wound cable housing or would newer brake or shift housing work equally well?
Last edited by Hondo6; 06-12-22 at 02:52 PM. Reason: Correct typo
#4891
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,735
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2155 Post(s)
Liked 3,406 Times
in
1,206 Posts
What you need is cable liner, not housing.
Like this:
Like this:
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#4892
tantum vehi
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,440
Bikes: More than I care to admit
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 1167 Post(s)
Liked 992 Times
in
491 Posts
PM me, I have a lever with a broken body, but need a reminder to look for it after I get done with work this week.
__________________
1970 Gitane TdF; 1973 Gitane TdF
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
#4894
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1444 Post(s)
Liked 1,064 Times
in
788 Posts
and you don't HAVE to purchase it separately, tho you can...since I always have shortish leftovers of brake and/or shifter housing I just push out the liner with one of my homemade "awls", like you make from trashed spokes, (enough to grab an end with pliers and pull it all out).
I have plenty that way and it's "free".
I have plenty that way and it's "free".
#4895
tantum vehi
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,440
Bikes: More than I care to admit
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 1167 Post(s)
Liked 992 Times
in
491 Posts
The MAFAC lever was not a match. It if someone else is looking for a very plain Jane lever (body is cracked), it’s yours for the cost of shipping.
__________________
1970 Gitane TdF; 1973 Gitane TdF
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
#4896
Senior Member
Shimano 105SC 115mm 70mm Ital BB - NOS
Ran across this the other day and it occurs to me that some here might need it.
German seller is listing the above BB for a very reasonable (for NOS) price on eBay - with free expedited shipping to the US. Caveats: the "free shipping" could be an error in the listing, and the guy is also away until 20 Jun.
He's listing qty 10 available. But the price listed is $35.00 - so they may go quickly when he returns. Dunno.
If anyone here needs an Ital thread NOS cup/cone BB with a 115mm (presumably JIS) spindle, this might be of interest.
URL: https://www.ebay.com/itm/390736048474
German seller is listing the above BB for a very reasonable (for NOS) price on eBay - with free expedited shipping to the US. Caveats: the "free shipping" could be an error in the listing, and the guy is also away until 20 Jun.
He's listing qty 10 available. But the price listed is $35.00 - so they may go quickly when he returns. Dunno.
If anyone here needs an Ital thread NOS cup/cone BB with a 115mm (presumably JIS) spindle, this might be of interest.
URL: https://www.ebay.com/itm/390736048474
#4897
Senior Member
#4898
Senior Member
Join Date: Mar 2015
Location: Texas panhandle
Posts: 512
Bikes: 1987 Schwinn Circuit, 1986 Schwinn Passage, 1987 Shogun Katana, 2018 Giant Anyroad Advanced, 2013 Karate Monkey
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 125 Post(s)
Liked 269 Times
in
93 Posts
Anybody have a pair of Suzue front cones 11.40mm long 14.9mm diameter. I know it's a stretch but I really can't afford a new wheelset right now.
#4899
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,735
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2155 Post(s)
Liked 3,406 Times
in
1,206 Posts
I have a pair of good 10.4 by 14.9 front cones. Look just like yours but with a 1mm taller top end, bearing surface looks the same. Probably not Suzue, might be Shimano.
On a good axle, too.
If you want them, yours for cost of postage. E-mail to rccardr@cox.net
On a good axle, too.
If you want them, yours for cost of postage. E-mail to rccardr@cox.net
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
Likes For rccardr:
#4900
Senior Member
Join Date: Mar 2015
Location: Texas panhandle
Posts: 512
Bikes: 1987 Schwinn Circuit, 1986 Schwinn Passage, 1987 Shogun Katana, 2018 Giant Anyroad Advanced, 2013 Karate Monkey
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 125 Post(s)
Liked 269 Times
in
93 Posts
I have a pair of good 10.4 by 14.9 front cones. Look just like yours but with a 1mm taller top end, bearing surface looks the same. Probably not Suzue, might be Shimano.
On a good axle, too.
If you want them, yours for cost of postage. E-mail to rccardr@cox.net
On a good axle, too.
If you want them, yours for cost of postage. E-mail to rccardr@cox.net