New Ekar GT Groupset
#1
New Ekar GT Groupset
Campagnolo released a new Ekar GT groupset. More aluminum, less CF, and lower cost.
Likes For RGMN:
#2
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 17,057
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Liked 8,079 Times
in
4,482 Posts
Likes For mstateglfr:
#3
Full Member
Join Date: Oct 2023
Posts: 449
Bikes: '00 LS Vortex/Chorus 12/Campag Zondas, '98 LS Classic/Chorus 10/Rolf Vector Pros
Liked 378 Times
in
218 Posts
Campagnolo released a new Ekar GT groupset. More aluminum, less CF, and lower cost.
Likes For 13ollocks:
Likes For AndyJoK:
#5
Senior Member
Join Date: May 2018
Location: Fargo ND
Posts: 962
Bikes: Time Scylon, Lynskey R350, Ritchey Breakaway, Ritchey Double Switchback, Lynskey Ridgeline, ICAN Fatbike
Liked 583 Times
in
332 Posts
I have two Ekar equipped bicycles, and I have found it to be excellent. One road, one gravel. I am aware that some people say they are a bit fiddley, but what I have found is that if they are setup according to the instructions Campagnolo publishes they are quite trouble free.
Yes, they can make a clack when you shift under power. They shift precisely, and you can down shift multiple gears in one swipe. I can work them with mittens on, but if they are coated in ice from freezing rain they will jam. The brakes are excellent.
I wish they had a crank that worked with 73 mm bottom bracket spacing, but you can't have everything. And if they would make an electronic version at a reasonable premium over the mechanical group, like maybe a $500 above the mechanical, I would probably put that on my next bike.
I also don't see much call for the alloy version unless it was quite a bit less expensive. You can get a carbon Ekar for about $1,000 US. Can I get the aluminum version for $600?
Yes, they can make a clack when you shift under power. They shift precisely, and you can down shift multiple gears in one swipe. I can work them with mittens on, but if they are coated in ice from freezing rain they will jam. The brakes are excellent.
I wish they had a crank that worked with 73 mm bottom bracket spacing, but you can't have everything. And if they would make an electronic version at a reasonable premium over the mechanical group, like maybe a $500 above the mechanical, I would probably put that on my next bike.
I also don't see much call for the alloy version unless it was quite a bit less expensive. You can get a carbon Ekar for about $1,000 US. Can I get the aluminum version for $600?
#6
Senior Member
Join Date: May 2013
Location: Kips Bay, NY
Posts: 2,246
Bikes: Ritchey Swiss Cross | Teesdale Kona Hot | Haro Extreme | Specialized Stumpjumper Comp | Cannondale F1000 | Shogun 1000 | Cannondale M500 | Norco Charger | Marin Muirwoods 29er | Shogun Kaze | Breezer Lightning
Liked 1,059 Times
in
515 Posts
#7
Price is obviously going to be a major point here. Interestingly it has an even wider range cassette option than Ekar and a smaller chainring option. It’s about 300g heavier, but potentially could be more durable. Seems like a reasonable option to me for those on a tighter budget or even just looking for lower gearing.
#8
Senior Member
Join Date: May 2018
Location: Fargo ND
Posts: 962
Bikes: Time Scylon, Lynskey R350, Ritchey Breakaway, Ritchey Double Switchback, Lynskey Ridgeline, ICAN Fatbike
Liked 583 Times
in
332 Posts
I wonder if this is aimed at the OEM market? Probably that is the case.
I have been looking at getting a new gravel bike to replace the drop bar MTB I currently have. I have focused on a couple of bikes that come with Ekar. Neither is low enough in price that I am wanting to spring for it.
A $200 price cut to a bike manufacturer might translate into a $600 price cut at the retail level.
I have been looking at getting a new gravel bike to replace the drop bar MTB I currently have. I have focused on a couple of bikes that come with Ekar. Neither is low enough in price that I am wanting to spring for it.
A $200 price cut to a bike manufacturer might translate into a $600 price cut at the retail level.
Likes For DangerousDanR:
#9
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 14,671
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Liked 4,569 Times
in
3,060 Posts
I think it is pretty neat. I know Campy doesn't always make the right choices and do what will be most practical but they make fun interesting stuff and sometimes have a bit of innovation thrown in or at least some good looks.
Likes For veganbikes:
#10
I have two Ekar equipped bicycles, and I have found it to be excellent. One road, one gravel. I am aware that some people say they are a bit fiddley, but what I have found is that if they are setup according to the instructions Campagnolo publishes they are quite trouble free.
Yes, they can make a clack when you shift under power. They shift precisely, and you can down shift multiple gears in one swipe. I can work them with mittens on, but if they are coated in ice from freezing rain they will jam. The brakes are excellent.
I wish they had a crank that worked with 73 mm bottom bracket spacing, but you can't have everything. And if they would make an electronic version at a reasonable premium over the mechanical group, like maybe a $500 above the mechanical, I would probably put that on my next bike.
I also don't see much call for the alloy version unless it was quite a bit less expensive. You can get a carbon Ekar for about $1,000 US. Can I get the aluminum version for $600?
Yes, they can make a clack when you shift under power. They shift precisely, and you can down shift multiple gears in one swipe. I can work them with mittens on, but if they are coated in ice from freezing rain they will jam. The brakes are excellent.
I wish they had a crank that worked with 73 mm bottom bracket spacing, but you can't have everything. And if they would make an electronic version at a reasonable premium over the mechanical group, like maybe a $500 above the mechanical, I would probably put that on my next bike.
I also don't see much call for the alloy version unless it was quite a bit less expensive. You can get a carbon Ekar for about $1,000 US. Can I get the aluminum version for $600?
#12
aged to perfection
Join Date: Jun 2009
Location: PacNW
Posts: 1,927
Bikes: Dinucci Allez 2.0, Richard Sachs, Alex Singer, Serotta, Masi GC, Raleigh Pro Mk.1, Hetchins, etc
Liked 1,346 Times
in
716 Posts
Probably the last Campagnolo component I will buy. "officially sanctioned merchandise".
/markp
#13
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,804
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Liked 1,931 Times
in
1,162 Posts
From that perspective, maybe Campagnolo have already carved out their niche and are settled into it, rather than being on the edge of slipping out of the mainstream, and Ekar GT, rather than it representing clawing at diminishing market share, represents Campagnolo growing out into new market segments.
#14
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 6,374
Bikes: 1989 Cinelli Supercorsa
Liked 3,325 Times
in
2,001 Posts
My bike has Campy dropouts—the only Campy parts on my bike. The only Campy parts I’ve ever owned or likely ever will.
#15
With a mighty wind
The thumb shifter on the Ergo makes it vastly superior to the other brands um ergonomically. I futzed around with lots of things on my gravel bike before heading back to Campy.
I happen to like the clunk. It’s positive.
I do run a Sram Force crank with a Rotor 13speed chainring. Works perfectly.
I happen to like the clunk. It’s positive.
I do run a Sram Force crank with a Rotor 13speed chainring. Works perfectly.
#16
Senior Member
The thumb shifter on the Ergo makes it vastly superior to the other brands um ergonomically. I futzed around with lots of things on my gravel bike before heading back to Campy.
I happen to like the clunk. It’s positive.
I do run a Sram Force crank with a Rotor 13speed chainring. Works perfectly.
I happen to like the clunk. It’s positive.
I do run a Sram Force crank with a Rotor 13speed chainring. Works perfectly.
Likes For Camilo:
#17
Senior Member
Join Date: May 2018
Location: Fargo ND
Posts: 962
Bikes: Time Scylon, Lynskey R350, Ritchey Breakaway, Ritchey Double Switchback, Lynskey Ridgeline, ICAN Fatbike
Liked 583 Times
in
332 Posts
I like that design much better than Shimano's system, but I prefer both Sram "double tap" and the current design of Microshift over anything else. Not that I'd refuse to use any one of them, just think both the Sram and Microshift - and also Campagnolo - are better designs than Shimano.
Likes For DangerousDanR:
#18
Full Member
I see no polished or at least bare aluminum. It’s worth $50 to me.
I see 4 arm crank with blind drilled holes looking like it’s related to that old Nexus crank. It is worth $10 to me.
It all looks like OEM for $600 hybrid bikes. Do they make a “shock absorber fork” to match? Gel seat from Cinelli?
what has the world come to when companies started in the 2000s have products that’re more appealing than the new new from Campagnolo?
I see 4 arm crank with blind drilled holes looking like it’s related to that old Nexus crank. It is worth $10 to me.
It all looks like OEM for $600 hybrid bikes. Do they make a “shock absorber fork” to match? Gel seat from Cinelli?
what has the world come to when companies started in the 2000s have products that’re more appealing than the new new from Campagnolo?
Last edited by MattoftheRocks; 03-01-24 at 09:53 AM.
Likes For MattoftheRocks:
Likes For prj71:
#20
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 6,374
Bikes: 1989 Cinelli Supercorsa
Liked 3,325 Times
in
2,001 Posts
Likes For smd4:
#21
I see no polished or at least bare aluminum. It’s worth $50 to me.
I see 4 arm crank with blind drilled holes looking like it’s related to that old Nexus crank. It is worth $10 to me.
It all looks like OEM for $600 hybrid bikes. Do they make a “shock absorber fork” to match? Gel seat from Cinelli?
what has the world come to when companies started in the 2000s have products that’re more appealing than the new new from Campagnolo?
I see 4 arm crank with blind drilled holes looking like it’s related to that old Nexus crank. It is worth $10 to me.
It all looks like OEM for $600 hybrid bikes. Do they make a “shock absorber fork” to match? Gel seat from Cinelli?
what has the world come to when companies started in the 2000s have products that’re more appealing than the new new from Campagnolo?
Likes For PeteHski:
#22
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 6,374
Bikes: 1989 Cinelli Supercorsa
Liked 3,325 Times
in
2,001 Posts
Likes For smd4:
#23
Likes For PeteHski:
#24
Full Member
“
Pacific Bicycles Manufactured Walmart bike
Clean, modern, understated design.”
I think we’ll have to agree to disagree.
Pacific Bicycles Manufactured Walmart bike
Clean, modern, understated design.”
I think we’ll have to agree to disagree.
#25
Edit: oh I see you cherry picked some older bikes to prove your point.
Last edited by PeteHski; 03-01-24 at 11:30 AM.