What have you been wrenching on lately?
#6401
Full Member
Join Date: May 2022
Location: Dixiana, AL
Posts: 250
Bikes: 1993 Diamond Back Sorrento, 1965 Schwinn Racer 3-speed, 1987 Schwinn High Sierra, 1990 Specialized Sirrus, 2020 Specialized Sirrus 3.0, 2013 Giant Seek 1
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 87 Post(s)
Liked 776 Times
in
199 Posts
Picked up a 1981 Miyata 1000 back in early May. Gave it a good wash and it all seems to be in good order, except the freewheel is a bit growly. Thankfully I had a 2 prong puller in my toolbox so the freewheel is off now. Trying the fill and flush with light oil method to see if that will quiet it down. Removed the "flick-stand" that was on the downtube because I didn't like how it covered up the Miyata logo.
Freewheel flush
Flick Stand
Looks better without it
After a wash and back together. The freewheel is quieter.
Freewheel flush
Flick Stand
Looks better without it
After a wash and back together. The freewheel is quieter.
Likes For zookster:
#6402
Henderson, NV
Join Date: Jan 2022
Location: Henderson/Las Vegas NV
Posts: 537
Bikes: Trek Alpha 3700, GT STS DH, Raleigh Grand Prix, Fisher Montare, Fisher CR-7, Fisher Aquila, Diamondback Sorrento, The Bike Beat Revolution, KHS XC 504R
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 322 Post(s)
Liked 598 Times
in
290 Posts
Picked up a 1981 Miyata 1000 back in early May. Gave it a good wash and it all seems to be in good order, except the freewheel is a bit growly. Thankfully I had a 2 prong puller in my toolbox so the freewheel is off now. Trying the fill and flush with light oil method to see if that will quiet it down. Removed the "flick-stand" that was on the downtube because I didn't like how it covered up the Miyata logo.
Flick Stand
Flick Stand
#6403
Full Member
Join Date: May 2022
Location: Dixiana, AL
Posts: 250
Bikes: 1993 Diamond Back Sorrento, 1965 Schwinn Racer 3-speed, 1987 Schwinn High Sierra, 1990 Specialized Sirrus, 2020 Specialized Sirrus 3.0, 2013 Giant Seek 1
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 87 Post(s)
Liked 776 Times
in
199 Posts
Likes For zookster:
#6404
Senior Member
Join Date: Aug 2015
Location: Murrieta Ca.
Posts: 537
Bikes: Teledyne Titan, Bob Jackson Audax Club, Bob Jackson World Tour, AlAn Record Ergal, 3Rensho Katana.
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 215 Post(s)
Liked 623 Times
in
245 Posts
Progress Report.
I Hate Waiting... Everything I need to do anything is not here, all is at the frame builder. I have weeded the front yard, trimmed the trees, did the laundry to keep the wife happy,and walked the dogs. nothing bicycle related has happened...
So here is a picture of the AlAn Record on the day it became a bicycle... Three years ago.
20191229_220141 by nemosengineer, on Flickr
: Mike
I Hate Waiting... Everything I need to do anything is not here, all is at the frame builder. I have weeded the front yard, trimmed the trees, did the laundry to keep the wife happy,and walked the dogs. nothing bicycle related has happened...
So here is a picture of the AlAn Record on the day it became a bicycle... Three years ago.
20191229_220141 by nemosengineer, on Flickr
: Mike
__________________
Booyah Hubba-Hubba!!!
Booyah Hubba-Hubba!!!
Likes For Nemosengineer:
Likes For EJM73:
Likes For dnewma04:
#6407
Senior Member
Join Date: Oct 2008
Location: Northern NY...Brownville
Posts: 2,586
Bikes: Specialized Aethos, Specialized Diverge Comp E5
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 243 Post(s)
Liked 464 Times
in
272 Posts
Bled a Magura hydro rim brake caliper on a Cervelo TT bike...ick, the "blue" fluid was brown and bubbly...very nice now.
Disassembled and rebuilt a Venge, also replaced the cracked seat post...shouldn't crank down on it that hard. It came out great and a happy customer.
Upgraded my Aethos from 11 speed mech Ultegra with TRP mech disk brakes to full kit of 105 Di2...quite pleased.
Disassembled and rebuilt a Venge, also replaced the cracked seat post...shouldn't crank down on it that hard. It came out great and a happy customer.
Upgraded my Aethos from 11 speed mech Ultegra with TRP mech disk brakes to full kit of 105 Di2...quite pleased.
Likes For Kai Winters:
#6408
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,999
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1956 Post(s)
Liked 3,662 Times
in
1,680 Posts
Likes For 52telecaster:
Likes For Schweinhund:
Likes For Schweinhund:
#6411
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,712
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1954 Post(s)
Liked 2,022 Times
in
1,115 Posts
Likes For Classtime:
#6412
Henderson, NV
Join Date: Jan 2022
Location: Henderson/Las Vegas NV
Posts: 537
Bikes: Trek Alpha 3700, GT STS DH, Raleigh Grand Prix, Fisher Montare, Fisher CR-7, Fisher Aquila, Diamondback Sorrento, The Bike Beat Revolution, KHS XC 504R
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 322 Post(s)
Liked 598 Times
in
290 Posts
A new $25 project I just picked up last night by chance. We were picking up a vintage dresser and my wife made the mistake of saying, "You don't have any bikes?" LOL. She was just shaking her head as I wheeled out a bike from the back...#6
Likes For Desert Ryder:
#6413
Newbie
BB turned out to be English. Water bottle braze-ons definitely lopped/ground off. The screw holes remain, which got pointed out me are off-center. Water bottle cages had been installed using machine screws (cages now re-purposed).
NOW: how to fill in those holes and smooth over (I'll use bolt on cage holders, etc.). I plan on having the frame media blasted so I can prime and repaint.
Thanks, DA
NOW: how to fill in those holes and smooth over (I'll use bolt on cage holders, etc.). I plan on having the frame media blasted so I can prime and repaint.
Thanks, DA
#6414
Senior Member
Join Date: May 2021
Location: London
Posts: 564
Bikes: Motobecane C41, Matsu$hita Nashonaru
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 215 Post(s)
Liked 438 Times
in
254 Posts
BB turned out to be English. Water bottle braze-ons definitely lopped/ground off. The screw holes remain, which got pointed out me are off-center. Water bottle cages had been installed using machine screws (cages now re-purposed).
NOW: how to fill in those holes and smooth over (I'll use bolt on cage holders, etc.). I plan on having the frame media blasted so I can prime and repaint.
Thanks, DA
NOW: how to fill in those holes and smooth over (I'll use bolt on cage holders, etc.). I plan on having the frame media blasted so I can prime and repaint.
Thanks, DA
#6415
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,884
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2465 Post(s)
Liked 3,178 Times
in
2,002 Posts
Bike 3 of what is now 6 giveaways...
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
Likes For jdawginsc:
#6416
Wheelman
Join Date: Aug 2021
Location: Putney, London UK
Posts: 852
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 298 Post(s)
Liked 680 Times
in
343 Posts
My first try at lug lining, using a Fluid Writer knock off and some cheap 'gold' paint.
It looks fine from a distance, not so great close up though
I've got some One Shot metallic gold in the post, difficult to get in the UK, but that should be better.
Next practise is a red/white head tube with fancy lugs and cutouts I should learn something.
On the other hand the red pearl looks damn fine.
It looks fine from a distance, not so great close up though
I've got some One Shot metallic gold in the post, difficult to get in the UK, but that should be better.
Next practise is a red/white head tube with fancy lugs and cutouts I should learn something.
On the other hand the red pearl looks damn fine.
Likes For Aardwolf:
Likes For Positron400:
#6418
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,884
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2465 Post(s)
Liked 3,178 Times
in
2,002 Posts
Dang. You just gave me a good idea for one of the sporty city bikes I just agreed to make for a friend and his wife. Thanks!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
#6420
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,437
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5890 Post(s)
Liked 3,475 Times
in
2,080 Posts
Raleigh Gran Sport Gravel Project
I love reading the various threads both on BF and the web about people building vintage bikes into gravel bikes. I decided to use a Raleigh Gran Sport to build into a gravel bike since it has ample clearance for reasonable volume tires. I'm running 700 x 35c Schwalbe Marathon Racer tires. 35c will work for my purposes. The dropout was drewed so I have to run the derailleur on a hanger which will make it hard I think to run a 38c tire. I've picked out the parts for the build; overhauled the bottom bracket, headset, and hubs; and cleaned up the frame as well. I'll run a stronglight 99 crank with 47/34 rings and a Sachs Maillard 23-30 7 speed freewheel.
Likes For bikemig:
#6421
Senior Member
Join Date: Aug 2017
Location: Germany
Posts: 1,090
Bikes: 80s Alan Super Record, 79' Somec Special, 90s Rossin(?) Columbus Ego Triathlon, previously: Bianchi SBX Reparto Corse (stolen) and so on...
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 391 Post(s)
Liked 813 Times
in
602 Posts
Wheel sticker and paint mask for a friends resto project
#6422
Cantilever believer
Join Date: Nov 2021
Location: Phoenix, AZ
Posts: 1,606
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 547 Post(s)
Liked 1,896 Times
in
852 Posts
In the process of building up a bicycle for the neighbor's tall grandkid from a bare frame and parts. Going slow but OK so far.
But I want to show the gang something else.
This afternoon while hunting (unsuccessfully so far) for important files, I opened a box I hadn't looked in for quite a while. It turned out to be several artifacts from my early 1980s riding days. Let's take a look:
My old Detto shoes with the nail-on plate. I'd forgotten I had switched to an adjustable bolted cleat after the original fixed nailed-on cleat wore out. These shoes probably have many thousands of miles and a few (very few) race victories in their past.
My souvenir bottle from the '82 Arizona Challenge ride. None other than Lon Haldeman reputedly called that ride the hardest one-day ride he'd done up to that date - it wasn't the 17,000 feet of climbing, but the 20+ mph headwinds for the middle third of the ride. I put in a couple hundred that day and got to Prescott at sunrise, and didn't feel like I hadn't given it my all.
This very nondescript bottle is actually a treasured artifact. I obtained it on a warm day in Mission Viejo in the summer of 1984 when it came flying out of the mens' road race pack at the Olympics. I think it was tossed by a New Zealander, but I'm not sure.
Back to working on the bike...
But I want to show the gang something else.
This afternoon while hunting (unsuccessfully so far) for important files, I opened a box I hadn't looked in for quite a while. It turned out to be several artifacts from my early 1980s riding days. Let's take a look:
My old Detto shoes with the nail-on plate. I'd forgotten I had switched to an adjustable bolted cleat after the original fixed nailed-on cleat wore out. These shoes probably have many thousands of miles and a few (very few) race victories in their past.
My souvenir bottle from the '82 Arizona Challenge ride. None other than Lon Haldeman reputedly called that ride the hardest one-day ride he'd done up to that date - it wasn't the 17,000 feet of climbing, but the 20+ mph headwinds for the middle third of the ride. I put in a couple hundred that day and got to Prescott at sunrise, and didn't feel like I hadn't given it my all.
This very nondescript bottle is actually a treasured artifact. I obtained it on a warm day in Mission Viejo in the summer of 1984 when it came flying out of the mens' road race pack at the Olympics. I think it was tossed by a New Zealander, but I'm not sure.
Back to working on the bike...
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
#6423
Senior Member
Join Date: Nov 2014
Location: Saratoga calif.
Posts: 1,049
Bikes: Miyata 610(66cm), GT Vantara Hybrid (64cm), Nishiki International (64cm), Peugeot rat rod (62 cm), Trek 800 Burning Man helicopter bike, Bob Jackson frame (to be restored?) plus a never ending stream of neglected waifs from the Bike exchange.
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 339 Post(s)
Likes: 0
Liked 632 Times
in
229 Posts
Here's my latest.
A 1971 Schwinn Racer 3 speed.
I installed a 24 tooth rear cog to give it better gear ratio. With this low is good for hills 2 for level and 3 for down hill.
I figure the Schwinn "racing saddle has to be at least as comfortable as the old Messinger.
A 1971 Schwinn Racer 3 speed.
I installed a 24 tooth rear cog to give it better gear ratio. With this low is good for hills 2 for level and 3 for down hill.
I figure the Schwinn "racing saddle has to be at least as comfortable as the old Messinger.
#6424
Senior Member
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,439
Bikes: You had me at rusty and Italian!!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 566 Post(s)
Liked 1,056 Times
in
548 Posts
Coincidence - this morning I dragged home a Coppertone 1964 Traveler. No wrenching on it yet but it is complete and has the original Schwinn tire on the front.
#6425
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,884
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2465 Post(s)
Liked 3,178 Times
in
2,002 Posts
Progress on the Gitane rat rod mixte gravel bike thingy.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
Likes For jdawginsc: