Installing cable donuts
#3
SuperGimp
Internal or external cabling?
The donuts that came with my wires have a solid outer rim, no way to get them on without undoing the cable. I imagine there is something out that that you can retrofit but I don't know of anything specific.
The donuts that came with my wires have a solid outer rim, no way to get them on without undoing the cable. I imagine there is something out that that you can retrofit but I don't know of anything specific.
#5
Member
Thread Starter
Join Date: Aug 2010
Posts: 30
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for checking!
#6
Senior Member
Join Date: Oct 2004
Location: Northern Ontario
Posts: 3,659
Bikes: Colnago Master XL, Bianchi Via Nirone 7, Marinoni Fango
Likes: 0
Liked 0 Times
in
0 Posts
Cut and solder the cable (kidding)
or slice half of the donut with a sharp blade so you can open it up and get they cable in. My experience with them is that they just slide all over the place and are pretty well useless.
or slice half of the donut with a sharp blade so you can open it up and get they cable in. My experience with them is that they just slide all over the place and are pretty well useless.
#7
Senior Member
I just went to an auto-parts store and bought a few feet of the smallest vacuum tubing they stocked, and ran it the full length of the gap between the cable stops on the top tube.
#8
Extra Medium Member
Shimangolo's suggestion is a good one. I personally use "cable housing lining", which you should be able to get at any good shop for pretty darn cheap. Those little rubber donuts really don't do much.
__________________
Droping the hamer since '86
Droping the hamer since '86
#11
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Liked 9,456 Times
in
4,672 Posts
Mmmm - donuts...
![](https://e-nautia.com/avatars/thesimpsons/drooling_homer.gif)
#12
Senior Member
I used to think these were necessary. I don't think this anymore.
__________________
Cat 2 Track, Cat 3 Road.
"If you’re new enough [to racing] that you would ask such question, then i would hazard a guess that if you just made up a workout that sounded hard to do, and did it, you’d probably get faster." --the tiniest sprinter
Cat 2 Track, Cat 3 Road.
"If you’re new enough [to racing] that you would ask such question, then i would hazard a guess that if you just made up a workout that sounded hard to do, and did it, you’d probably get faster." --the tiniest sprinter
#15
Senior Member
In my experience, any rear brake cable that does not have a continuous housing running all the way from lever to rear brake, will rattle against the top tube when you hit bumps. Very annoying.
#17
Senior Member
Join Date: Dec 2009
Location: Houston, TX
Posts: 28,682
Bikes: 1990 Romic Reynolds 531 custom build, Merlin Works CR Ti custom build, super light Workswell 066 custom build
Likes: 0
Liked 58 Times
in
36 Posts
Wow! That is so interesting. In 30+ year of cycling I have never had rattle from the exposed inner cable slapping the frame. Ever! The only similar problem I ever had was the cable quick disconnects on a Ritchey Breakaway rattling against the frame. Rubber O-rings fixed that up fine.
#18
SuperGimp
![Big Grin](images/smilies/biggrin.gif)
#19
Senior Member
In my experience, shift cables are tight enough they never rattle against the tubes, so I've never needed to do anything with them. In contrast, the rear brake cable is quite slack when not applying brakes. On my Litespeed, the rear brake cable jangled like a bell before I slipped the tubing over it.
#21
Senior Member
Join Date: Nov 2003
Location: SE Minnesota
Posts: 12,275
Bikes: are better than yours.
Likes: 0
Liked 4 Times
in
4 Posts
I had a CAAD 8 that would rattle the shift cables against the downtube when the cables were crossed. Donuts fixed it.
__________________
Telemachus has, indeed, sneezed.
Telemachus has, indeed, sneezed.
#22
Senior Member
In my experience, shift cables are tight enough they never rattle against the tubes, so I've never needed to do anything with them. In contrast, the rear brake cable is quite slack when not applying brakes. On my Litespeed, the rear brake cable jangled like a bell before I slipped the tubing over it.
__________________
Cat 2 Track, Cat 3 Road.
"If you’re new enough [to racing] that you would ask such question, then i would hazard a guess that if you just made up a workout that sounded hard to do, and did it, you’d probably get faster." --the tiniest sprinter
Cat 2 Track, Cat 3 Road.
"If you’re new enough [to racing] that you would ask such question, then i would hazard a guess that if you just made up a workout that sounded hard to do, and did it, you’d probably get faster." --the tiniest sprinter
#23
Senior Member
Brand new build with everything working perfectly.
When you have 44cm of unsupported cable running just 3mm from a metal tube, it is going to slap on bumps.
#24
You Know!? For Kids!
You could use a small dab of clear silicone caulk to make a rudimentary cable donut on a cable without rerunning it I would think. Heck, you could even find colored caulk.
__________________
Are you a registered member? Why not? Click here to register. It's free and only takes 27 seconds! Help out the forums, abide by our community guidelines.
Are you a registered member? Why not? Click here to register. It's free and only takes 27 seconds! Help out the forums, abide by our community guidelines.
#25
Senior Member
Join Date: Aug 2009
Posts: 8,550
Bikes: Wilier Izoard XP (Record);Cinelli Xperience (Force);Specialized Allez (Rival);Bianchi Via Nirone 7 (Centaur); Colnago AC-R Disc;Colnago V1r Limited Edition;De Rosa King 3 Limited(Force 22);DeRosa Merak(Red):Pinarello Dogma 65.1 Hydro(Di2)
Liked 278 Times
in
146 Posts