WTB: 56cm frameset
#1
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,831
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1874 Post(s)
Liked 698 Times
in
471 Posts
WTB: 56cm frameset
A couple wants:
- mid to high end tubing (~531)
- It needs to have room for wider tires, so I'm thinking something originally designed for 27" wheels.
- decent condition
- preference towards Trek but open to others
- on the cheaper side (less than $300 for sure, ideally under $200)
What's out there?
- mid to high end tubing (~531)
- It needs to have room for wider tires, so I'm thinking something originally designed for 27" wheels.
- decent condition
- preference towards Trek but open to others
- on the cheaper side (less than $300 for sure, ideally under $200)
What's out there?
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
#2
Senior Member
Join Date: Jun 2006
Posts: 20,319
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3471 Post(s)
Liked 2,846 Times
in
2,007 Posts
I would specify 56 cm center to top or center to center.
#3
Senior Member
Join Date: Feb 2017
Location: Chicago, IL
Posts: 518
Bikes: 2004 Trek 520, resto-modded 1987 Cannondale SR400, rando-modded 1976 AD Vent Noir; 2019 Wabi Classic; 1989? Burley Duet
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 213 Post(s)
Liked 93 Times
in
51 Posts
Maybe the 56cm 520 frameset in the post below this one would suit your purposes?
#6
Cat 6
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,482
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 184 Times
in
119 Posts
Still have my Ranson, cheap enough for a PC refinish and be under your budget. I'll have to come back with the link
https://www.bikeforums.net/classic-v...lx-ranson.html
info on angles, clearance later in the thread
https://www.bikeforums.net/classic-v...lx-ranson.html
info on angles, clearance later in the thread
Last edited by Ex Pres; 12-31-18 at 07:51 PM.
#7
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,831
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1874 Post(s)
Liked 698 Times
in
471 Posts
Still have my Ranson, cheap enough for a PC refinish and be under your budget. I'll have to come back with the link
https://www.bikeforums.net/classic-v...lx-ranson.html
info on angles, clearance later in the thread
https://www.bikeforums.net/classic-v...lx-ranson.html
info on angles, clearance later in the thread
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
#8
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,806
Bikes: Numerous
Mentioned: 152 Post(s)
Tagged: 0 Thread(s)
Quoted: 1684 Post(s)
Liked 3,201 Times
in
932 Posts
This one is still hanging out (literally) in my basement. 57 cm. It’s 130 spaced and I’ll have to check on tire clearance. I had 25’s on it.
https://www.bikeforums.net/classic-v...ork-57-cm.html
https://www.bikeforums.net/classic-v...ork-57-cm.html
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
#9
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,831
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1874 Post(s)
Liked 698 Times
in
471 Posts
This one is still hanging out (literally) in my basement. 57 cm. It’s 130 spaced and I’ll have to check on tire clearance. I had 25’s on it.
https://www.bikeforums.net/classic-v...ork-57-cm.html
https://www.bikeforums.net/classic-v...ork-57-cm.html
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
#12
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,778
Mentioned: 236 Post(s)
Tagged: 0 Thread(s)
Quoted: 2175 Post(s)
Liked 3,538 Times
in
1,239 Posts
An 86 will take true 28's. I have Vittoria 28's on my 86 and they mount up at 27-ish mm with a smidge of additional clearance.
Wouldn't be so confident about Conti GP 28's, they mount up at 30mm or more.
Wouldn't be so confident about Conti GP 28's, they mount up at 30mm or more.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#13
Senior Member
Join Date: Jan 2012
Location: Forksbent, MN
Posts: 3,190
Bikes: Yes
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 301 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
22in ctc tt Trek 630 frame that is currently running 27 in wheels. Some touch up and original 531 sticker mostly gone. Looking for $195 plus shipping for FF and HS. Possibly with other bits shown for additional.
PM if interested.
PM if interested.
#15
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,778
Mentioned: 236 Post(s)
Tagged: 0 Thread(s)
Quoted: 2175 Post(s)
Liked 3,538 Times
in
1,239 Posts
That's a deal, right there.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#17
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,831
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1874 Post(s)
Liked 698 Times
in
471 Posts
Thanks for the info, that's definitely not wide enough unfortunately.
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
#18
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,563
Bikes: A bunch of old bikes and a few new ones
Mentioned: 179 Post(s)
Tagged: 0 Thread(s)
Quoted: 5938 Post(s)
Liked 3,663 Times
in
2,158 Posts
#20
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,563
Bikes: A bunch of old bikes and a few new ones
Mentioned: 179 Post(s)
Tagged: 0 Thread(s)
Quoted: 5938 Post(s)
Liked 3,663 Times
in
2,158 Posts
I was talking about my 1984 Trek 610, not the bike offered for sale. You'll have to ask @Chrome Molly about his bike!
I will say this, getting a really fat tire to work with a vintage Trek may be difficult unless you are willing to go the 650b route. 32c tires were considered "fat" tires once upon a time and these bikes (even the touring versions) don't tend to have a lot of extra clearance. If looking for a vintage 531/chrome moly bike that can rock a really fat tire (and not go the 650b route), you might want to look at bikes from the 70s that came stock with center pull brakes. By and large my 70s era machines (Fuji Finest, Motobecane Grand Record, and Sekine SHS 271) can take a 35-38c tire easily.
The limiting factor on tire size tends to be the clearance around the fork crown up front and in the rear the clearance in the stays as well as the brake bridge. 70s machines tended to come with center pull brakes with longer reach than can be found in the Trek bikes from the late 70s/early 80s (and I've worked on most of those) and the frames can generally take a pretty fat tire (certainly north of 32c).
Here is a decent piece from Bicycling on this:
https://www.bicycling.com/bikes-gear...-reach-brakes/
I will say this, getting a really fat tire to work with a vintage Trek may be difficult unless you are willing to go the 650b route. 32c tires were considered "fat" tires once upon a time and these bikes (even the touring versions) don't tend to have a lot of extra clearance. If looking for a vintage 531/chrome moly bike that can rock a really fat tire (and not go the 650b route), you might want to look at bikes from the 70s that came stock with center pull brakes. By and large my 70s era machines (Fuji Finest, Motobecane Grand Record, and Sekine SHS 271) can take a 35-38c tire easily.
The limiting factor on tire size tends to be the clearance around the fork crown up front and in the rear the clearance in the stays as well as the brake bridge. 70s machines tended to come with center pull brakes with longer reach than can be found in the Trek bikes from the late 70s/early 80s (and I've worked on most of those) and the frames can generally take a pretty fat tire (certainly north of 32c).
Here is a decent piece from Bicycling on this:
https://www.bicycling.com/bikes-gear...-reach-brakes/
Last edited by bikemig; 01-02-19 at 10:38 AM.
#21
Junior Member
Join Date: Jun 2011
Location: Goodyear, AZ
Posts: 173
Bikes: 1989 Cannondale SR400(?)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 27 Post(s)
Likes: 0
Liked 15 Times
in
9 Posts
Hi Shoota,
I have an 1986 Team Fuji I'm thinking about selling. Its in good shape. The paint and decals are a little sun baked, but other than that it's ridable. Has full Suntour Sprint group. I'd sell just the frame though. I don't think it will fit 32c tires. I've only run 23c on it.
It's Blue and Yellow, 56cm. The stem has been sun faded too. It doesn't have a seat, but other than that, just like the catalog. 1986 Team Fuji Catalog scan
I have an 1986 Team Fuji I'm thinking about selling. Its in good shape. The paint and decals are a little sun baked, but other than that it's ridable. Has full Suntour Sprint group. I'd sell just the frame though. I don't think it will fit 32c tires. I've only run 23c on it.
It's Blue and Yellow, 56cm. The stem has been sun faded too. It doesn't have a seat, but other than that, just like the catalog. 1986 Team Fuji Catalog scan
#22
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,563
Bikes: A bunch of old bikes and a few new ones
Mentioned: 179 Post(s)
Tagged: 0 Thread(s)
Quoted: 5938 Post(s)
Liked 3,663 Times
in
2,158 Posts
How cheap is cheap and how much work do you want to do?
If you're lusting after fat tires and don't mind putting some work into a bike. I have a heck of a frame. It's a 1972 Fuji Finest.
Here are the pics and you'll see what the problem is (a stuck stem):
https://www.bikeforums.net/classic-v...stem-heck.html
The frame itself is in very good shape. The paint is very good and the bike is fully chromed underneath the paint. The bike will need an oxalic bath though. It can take a very large tire no problem. It originally was spec'd for 27 inch tires and center pull brakes.
If you're lusting after fat tires and don't mind putting some work into a bike. I have a heck of a frame. It's a 1972 Fuji Finest.
Here are the pics and you'll see what the problem is (a stuck stem):
https://www.bikeforums.net/classic-v...stem-heck.html
The frame itself is in very good shape. The paint is very good and the bike is fully chromed underneath the paint. The bike will need an oxalic bath though. It can take a very large tire no problem. It originally was spec'd for 27 inch tires and center pull brakes.