Post Your Pearls That "Most" Others Don't Know or Do
#1
Should Be More Popular
Thread Starter
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,641
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Liked 9,572 Times
in
4,426 Posts
Post Your Pearls That "Most" Others Don't Know or Do
On today's ride, it struck me that there are sometimes "quirky" things we cyclists do that are a good idea (possibly) but not commonly known or done.
Here is one of mine:
After riding near glass or even shardy looking grit, I reach down with my hand and briefly brush off the front and rear tires. This loosens any sharps before they get into the tread and, I believe, reduces the risk of flat tires. The down side is you may wear out your glove or even slightly injure your hand (if you use direct skin contact) but for me it's worthwhile.
I don't ever see my friends do this. It's a habit I picked up from my cycling days in Baltimore back in the 1980's where broken glass on the streets was common.
Feel free to critique and/or post your own gems of wisdom that are not commonly known.
Here is one of mine:
After riding near glass or even shardy looking grit, I reach down with my hand and briefly brush off the front and rear tires. This loosens any sharps before they get into the tread and, I believe, reduces the risk of flat tires. The down side is you may wear out your glove or even slightly injure your hand (if you use direct skin contact) but for me it's worthwhile.
I don't ever see my friends do this. It's a habit I picked up from my cycling days in Baltimore back in the 1980's where broken glass on the streets was common.
Feel free to critique and/or post your own gems of wisdom that are not commonly known.
Likes For datlas:
#2
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,521
Bikes: R3 Disc, Haanjo
Liked 9,462 Times
in
4,673 Posts
^^^ I do that, too, though gingerly if I'm not wearing gloves.
#4
Senior Member
Wrap your vest with a piece of latex tube.
Makes a smaller package, and helps to keep it from coming out of the jersey pocket.
Also useful have on hand for other lashing/emergency situations.
Makes a smaller package, and helps to keep it from coming out of the jersey pocket.
Also useful have on hand for other lashing/emergency situations.
#5
Senior Member
Join Date: Nov 2013
Location: Southern California
Posts: 1,416
Bikes: 2019 Supersix Evo, 2002 Trek 2000
Liked 45 Times
in
32 Posts
If you get soaked while riding, often the most problematic thing is getting your shoes dry by the next day's ride.
When you get home, immediately take the insoles out of your shoes and lay them out to dry. Fill the shoes with crumpled up newspaper. Leave them sit like that while you shower and so on. Change the newspaper an hour or two later, then again before bed, and you'll likely have decently dry shoes the next morning.
When you get home, immediately take the insoles out of your shoes and lay them out to dry. Fill the shoes with crumpled up newspaper. Leave them sit like that while you shower and so on. Change the newspaper an hour or two later, then again before bed, and you'll likely have decently dry shoes the next morning.
Likes For goenrdoug:
#6
Keep a roll of toilet paper in your car or gear bag. You never know when you'll need it or if the Porta-Potty has any.
Likes For topflightpro:
#7
So it is
Join Date: Sep 2008
Location: Westminster, CO
Posts: 21,874
Bikes: Luzerne, 684, Boreas, Wheelhouse, Alize©®, Bayamo, Cayo
Liked 5,282 Times
in
3,012 Posts
On today's ride, it struck me that there are sometimes "quirky" things we cyclists do that are a good idea (possibly) but not commonly known or done.
Here is one of mine:
After riding near glass or even shardy looking grit, I reach down with my hand and briefly brush off the front and rear tires. This loosens any sharps before they get into the tread and, I believe, reduces the risk of flat tires. The down side is you may wear out your glove or even slightly injure your hand (if you use direct skin contact) but for me it's worthwhile.
I don't ever see my friends do this. It's a habit I picked up from my cycling days in Baltimore back in the 1980's where broken glass on the streets was common.
Feel free to critique and/or post your own gems of wisdom that are not commonly known.
Here is one of mine:
After riding near glass or even shardy looking grit, I reach down with my hand and briefly brush off the front and rear tires. This loosens any sharps before they get into the tread and, I believe, reduces the risk of flat tires. The down side is you may wear out your glove or even slightly injure your hand (if you use direct skin contact) but for me it's worthwhile.
I don't ever see my friends do this. It's a habit I picked up from my cycling days in Baltimore back in the 1980's where broken glass on the streets was common.
Feel free to critique and/or post your own gems of wisdom that are not commonly known.
I cut up an old tube to length, and put Co2 cartridges in them so they don't rattle.
Likes For LAJ:
#8
Senior Member
When I come up to a stop sign that I want to actually be completely legal at (eg: cops may be in the vicinity) I'll slow way down and stand up and lean back a bit, just as I get to the line I'll tap the brakes and bring the bike itself to a complete stop for a microinstant (that's 1 millionth of an instant for you non-imperial unit users out there) while I allow my body to continue moving forward. As I release the brakes I've already got my foot on the power part of the stroke and accelerate out of the intersection. The bike stopped, I didn't.
This is something most cyclists on this forum will know, but I'm continually surprised by how many folks I've ridden with who have no idea about gearings and differences in cassettes, cranksets, etc. They might be struggling up a climb and I ask what cassette they're using and they have no idea. It's just whatever the bike came with. No idea that there are different cassettes with different gearings, some of which may be better suited for what they're doing, but they don't know this, and don't realize that swapping a cassette is like a five-minute job with just two inexpensive tools required. They'll just take it in and pay someone else to do it, and that's if they know it's even something that can or should be done.
I guess the same could be said for the number of folks I've ridden with who have no idea that a chain can be removable, and that a removable chain is a joy to work with.
I've used my hand to swipe debris off at least the front tire too, before, but I've also gotten lacerations in my gloves doing this, and thanked my lucky stars I was wearing gloves in the first place.
This is something most cyclists on this forum will know, but I'm continually surprised by how many folks I've ridden with who have no idea about gearings and differences in cassettes, cranksets, etc. They might be struggling up a climb and I ask what cassette they're using and they have no idea. It's just whatever the bike came with. No idea that there are different cassettes with different gearings, some of which may be better suited for what they're doing, but they don't know this, and don't realize that swapping a cassette is like a five-minute job with just two inexpensive tools required. They'll just take it in and pay someone else to do it, and that's if they know it's even something that can or should be done.
I guess the same could be said for the number of folks I've ridden with who have no idea that a chain can be removable, and that a removable chain is a joy to work with.
I've used my hand to swipe debris off at least the front tire too, before, but I've also gotten lacerations in my gloves doing this, and thanked my lucky stars I was wearing gloves in the first place.
Likes For SethAZ:
#9
Senior Member
Put a pair of nitrile gloves and a couple of cotton balls in the seat bag. The gloves are great for any repair on the road so you don't get the bars/hoods all nasty from chain grease afterwards and the cotton balls are useful for finding small things on the inside of the tire that may have cut your tube but that you can't see with your eyes. You could also feel the inside of the tire with your finger, but that can lead to cuts.
Likes For himespau:
#10
Senior Member
On today's ride, it struck me that there are sometimes "quirky" things we cyclists do that are a good idea (possibly) but not commonly known or done.
Here is one of mine:
After riding near glass or even shardy looking grit, I reach down with my hand and briefly brush off the front and rear tires. This loosens any sharps before they get into the tread and, I believe, reduces the risk of flat tires. The down side is you may wear out your glove or even slightly injure your hand (if you use direct skin contact) but for me it's worthwhile.
I don't ever see my friends do this. It's a habit I picked up from my cycling days in Baltimore back in the 1980's where broken glass on the streets was common.
Feel free to critique and/or post your own gems of wisdom that are not commonly known.
Here is one of mine:
After riding near glass or even shardy looking grit, I reach down with my hand and briefly brush off the front and rear tires. This loosens any sharps before they get into the tread and, I believe, reduces the risk of flat tires. The down side is you may wear out your glove or even slightly injure your hand (if you use direct skin contact) but for me it's worthwhile.
I don't ever see my friends do this. It's a habit I picked up from my cycling days in Baltimore back in the 1980's where broken glass on the streets was common.
Feel free to critique and/or post your own gems of wisdom that are not commonly known.
Likes For himespau:
#11
Very Senior Member
Join Date: Mar 2018
Location: Always on the Run
Posts: 1,211
Bikes: More than last week
Liked 344 Times
in
245 Posts
On today's ride, it struck me that there are sometimes "quirky" things we cyclists do that are a good idea (possibly) but not commonly known or done.
Here is one of mine:
After riding near glass or even shardy looking grit, I reach down with my hand and briefly brush off the front and rear tires. This loosens any sharps before they get into the tread and, I believe, reduces the risk of flat tires. The down side is you may wear out your glove or even slightly injure your hand (if you use direct skin contact) but for me it's worthwhile.
I don't ever see my friends do this. It's a habit I picked up from my cycling days in Baltimore back in the 1980's where broken glass on the streets was common.
Feel free to critique and/or post your own gems of wisdom that are not commonly known.
Here is one of mine:
After riding near glass or even shardy looking grit, I reach down with my hand and briefly brush off the front and rear tires. This loosens any sharps before they get into the tread and, I believe, reduces the risk of flat tires. The down side is you may wear out your glove or even slightly injure your hand (if you use direct skin contact) but for me it's worthwhile.
I don't ever see my friends do this. It's a habit I picked up from my cycling days in Baltimore back in the 1980's where broken glass on the streets was common.
Feel free to critique and/or post your own gems of wisdom that are not commonly known.
#12
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Liked 2,435 Times
in
1,187 Posts
After riding near glass or even shardy looking grit, I reach down with my hand and briefly brush off the front and rear tires. This loosens any sharps before they get into the tread and, I believe, reduces the risk of flat tires. The down side is you may wear out your glove or even slightly injure your hand (if you use direct skin contact) but for me it's worthwhile.
--------------------------------------------------------------------------
I keep a cotton ball in my saddle bag so when I get a flat, it's a easy way to find if there's something stuck in the inside of the tire that will puncture the new tube.
I also have a expired driver's license in my saddle bag since I don't carry a wallet when I ride. That way I do have ID if needed, besides a BikeID on my ankle with emergency phone numbers.I once got stopped by a cop and harassed because i didn't have ID. (long story).
Likes For GlennR:
#13
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,631
Bikes: 2023 Niner RLT 9 RDO, 2022 Trek Supercaliber, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Liked 8,963 Times
in
4,200 Posts
On cool mornings (vest temperature) where I know it will be warming up quickly, I use a plastic shopping bag layered between my base and my jersey. It gives me wind protection on my torso, but it's easier and quicker to remove than a vest, and takes up less pocket space. The bag layer also works for cool descents after a long climb.
__________________
Platypus gravelus.
Platypus gravelus.
Likes For Eric F:
#14
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,521
Bikes: R3 Disc, Haanjo
Liked 9,462 Times
in
4,673 Posts
Likes For WhyFi:
#15
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 7,331
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Liked 2,410 Times
in
1,361 Posts
On today's ride, it struck me that there are sometimes "quirky" things we cyclists do that are a good idea (possibly) but not commonly known or done.
Here is one of mine:
After riding near glass or even shardy looking grit, I reach down with my hand and briefly brush off the front and rear tires. This loosens any sharps before they get into the tread and, I believe, reduces the risk of flat tires. The down side is you may wear out your glove or even slightly injure your hand (if you use direct skin contact) but for me it's worthwhile.
I don't ever see my friends do this. It's a habit I picked up from my cycling days in Baltimore back in the 1980's where broken glass on the streets was common.
Feel free to critique and/or post your own gems of wisdom that are not commonly known.
Here is one of mine:
After riding near glass or even shardy looking grit, I reach down with my hand and briefly brush off the front and rear tires. This loosens any sharps before they get into the tread and, I believe, reduces the risk of flat tires. The down side is you may wear out your glove or even slightly injure your hand (if you use direct skin contact) but for me it's worthwhile.
I don't ever see my friends do this. It's a habit I picked up from my cycling days in Baltimore back in the 1980's where broken glass on the streets was common.
Feel free to critique and/or post your own gems of wisdom that are not commonly known.
My only gem is if you are out to dinner (remember going out to dinner ?) and the they give you those packaged hand wipes, as for some extra, stick in your seat bag to clean your hands after a mechanical.
#16
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Liked 2,435 Times
in
1,187 Posts
#17
Super Modest
Join Date: Jun 2002
Location: Central Illinois
Posts: 23,838
Bikes: Trek Domane+, Trek Emonda, Giant Propel, Colnago V3, ICE VTX WC
Liked 5,149 Times
in
2,310 Posts
Hmm, I brush tires, too. Been doing it since I started around 1982.
__________________
Keep the chain tight!
Likes For Trsnrtr:
#18
Senior Member
I think it was the legendary Jobst Brandt who commented that by the time you are able to reach down and place a gloved hand onto the tire, it’s made many, many revolutions and whatever puncture is going to happen, has. Stopped doing this maybe 15 years ago, but then I cannot recall the last time I had a front flat.
Wiping tires is an old trick that riders did when they had nothing
better to do while cruising along. If you observe the ritual, it
should be apparent that it serves no practical purpose because between
the time the hazard is run over and the wheel wipe, two or more wheel
revolutions take place. Anything that's going into the tire is in by
that time although the tube may not be punctured yet.
Beyond that, my tire wiping friends had no less flats than the average
but that proves nothing because I also have friends who never find
tools or money on the road, and they get lots of flats... but that's
because the are not especially observant. Any sharp object that
enters the tire is usually in on the first contact and is definitely
in with its protruding end trimmed by the third. Puncture vine is the
most insidious offender and it takes only the first contact to penetrate.
#19
Should Be More Popular
Thread Starter
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,641
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Liked 9,572 Times
in
4,426 Posts
#20
Senior Member
Put a pair of nitrile gloves and a couple of cotton balls in the seat bag. The gloves are great for any repair on the road so you don't get the bars/hoods all nasty from chain grease afterwards and the cotton balls are useful for finding small things on the inside of the tire that may have cut your tube but that you can't see with your eyes. You could also feel the inside of the tire with your finger, but that can lead to cuts.
#21
Senior Member
Yes, indeed. Jobst Brandt was a very smart fellow. It never occurred to me to question the received wisdom of wiping tires on the fly, learned from older riders back in 1965, until I read his comments on the topic (from this page):
"Beyond that, my tire wiping friends had no less flats than the average
but that proves nothing because I also have friends who never find
tools or money on the road, and they get lots of flats..."
"Beyond that, my tire wiping friends had no less flats than the average
but that proves nothing because I also have friends who never find
tools or money on the road, and they get lots of flats..."
#22
Senior Member
Here's another one: I put my full name and some other identifying information on the lock screen of my phone*. They won't be able to unlock it, but just looking at the screen they'll know who I am if they're trying to ID me.
*this one worked for me during a military deployment once too. I had my phone in my pocket and went to take care of some business, ahem, and about 20 minutes later I got an email from someone saying they had my phone. It had fallen out of my pocket while my pocket was, uh, lower than it's usual level.
*this one worked for me during a military deployment once too. I had my phone in my pocket and went to take care of some business, ahem, and about 20 minutes later I got an email from someone saying they had my phone. It had fallen out of my pocket while my pocket was, uh, lower than it's usual level.
Likes For SethAZ:
#23
Senior Member
I don't flat all that much, but then again I've got an entire collection of tools that I saw, stopped for, stuffed into my jersey pocket, then continued the ride. My best find to date was a really nice set of lineman's pliers. I've also got someone's hammer, a couple of screwdrivers, a hedge trimmer, and an array of various sockets and other miscellaneous tools. Who knew that being a tool spotter would also reduce flats? Having a little situational awareness definitely pays off in cycling.
#24
Senior Member
I've collected a high-quality tape measure, needle-nose pliers, Vice-Grips, and about two dozen forks, knives, and spoons in various stages of two-dimensionality from being run over. But the best find was on a ride on one of my track bikes: found a 15-mm combination wrench, which immediately replaced the annoying Park crank bolt tool I'd been carrying for years for unscrewing the track nuts.
I don't always stop for a socket, though I often do. Depends on what my goals are for a ride. If I'm trying to hold a particular pace for a long time I might just blow by, but if I'm just taking it easy I'll stop and pick it up. Anything bigger than a socket though is coming home with me. I have no idea who's out there losing all these tools on the roads I ride, but with all these workmen with toolboxes strapped to the sides of their truck, I suppose I shouldn't be too surprised some of these tools pop smoke and seek out a new owner from time to time.
Likes For SethAZ:
#25
Fat n slow
Join Date: Oct 2013
Location: Saratoga, NY
Posts: 4,327
Bikes: Cervelo R3, Giant Revolt
Liked 2,113 Times
in
987 Posts
On today's ride, it struck me that there are sometimes "quirky" things we cyclists do that are a good idea (possibly) but not commonly known or done.
Here is one of mine:
After riding near glass or even shardy looking grit, I reach down with my hand and briefly brush off the front and rear tires. This loosens any sharps before they get into the tread and, I believe, reduces the risk of flat tires. The down side is you may wear out your glove or even slightly injure your hand (if you use direct skin contact) but for me it's worthwhile.
I don't ever see my friends do this. It's a habit I picked up from my cycling days in Baltimore back in the 1980's where broken glass on the streets was common.
Feel free to critique and/or post your own gems of wisdom that are not commonly known.
Here is one of mine:
After riding near glass or even shardy looking grit, I reach down with my hand and briefly brush off the front and rear tires. This loosens any sharps before they get into the tread and, I believe, reduces the risk of flat tires. The down side is you may wear out your glove or even slightly injure your hand (if you use direct skin contact) but for me it's worthwhile.
I don't ever see my friends do this. It's a habit I picked up from my cycling days in Baltimore back in the 1980's where broken glass on the streets was common.
Feel free to critique and/or post your own gems of wisdom that are not commonly known.