My gears aren't shifting smoothly...
#2
Senior Member
Join Date: Jan 2011
Location: South Yorkshire, England.
Posts: 247
Bikes: Colnago CX-1 Record 11sp. Carbon Epic expert 29er, Claud Butler Dalesman. Proflex X-px Works, Cougar 653. KHS Montana Pro, Hercules Alassio. Ammoco Monte Carlo F/SS. Corratec Superbow Fun 29er. Claud Butler Midas. Kenisis T2. Peugeot Perthus.
Likes: 0
Liked 0 Times
in
0 Posts
Give it a try first, check out Youtube tutorials and Sheldon Brown.
#3
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Likes: 0
Liked 1,099 Times
in
745 Posts
It's something tyou can easily do yourself IF (big if) you know what you are doing. First, we need a lot more information:
1. What type of gears? Derailleur, internal gear hub?
2. Where is the rough shifting occuring, front, rear or both
3. A much better description of the problem and symptoms
1. What type of gears? Derailleur, internal gear hub?
2. Where is the rough shifting occuring, front, rear or both
3. A much better description of the problem and symptoms
#4
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Liked 644 Times
in
365 Posts
1. Retro Grouch's quick and dirty answer: Look at where the shift cable enters your rear derailleur. See a barrel adjuster there? Stand behind the bike and turn it counter-clockwise 1/4 turn. My bet is that'll fix it.
2. The engineer's answer: Look up rear derailleur adjustment on the Park tool website. They'll have a good set of step-by-stem instructions. Start at the beginning and don't skip any steps.
3. The lawyer's answer: Take it to a bike shop. If they can't fix it to your satisfaction at least you'll have somebody else that you can blame.
#5
Senior Member
1. Either, Put your bike on a stand(if you have one), or turn it upside down, or raise the back wheel off the ground
2. Turn the pedals in a forward motion.
3. While turning the pedals, shift the gears
4. While shifting the gears, watch the chain guide to see if it is loose
5. Check to see how much pressure you have to apply to the brakes to come to a full stop. This could be a sign. That your brake cables need replacing. If that is problem, a bike shop would have the time, and parts needed to fix the problem.
#7
Bwahaha..... Gosh I still miss the bennies from long ago.... And I can tweak my own bikes yet today, thanks to you-tube. 👍
#8
Junior Member
Something you most likely "can" do. Whether or not you want to take the time to learn is another story. I found it was quite complicated and I kept learning as I tinkered with more bikes, but now am glad I learned. I still get confused sometimes though as we all do
#9
Expired Member
OP would have to be pretty slow if he hasn't figured this out in 8 years.
Thread
Thread Starter
Forum
Replies
Last Post
ParkingTheBus
Bicycle Mechanics
5
06-08-15 06:17 PM
illdthedj
Bicycle Mechanics
30
08-20-13 03:22 PM