Meet Mr Old Fella (1938 CCM)
#1
Senior Member
Thread Starter
Join Date: Jan 2007
Location: Ontario
Posts: 2,673
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 486 Post(s)
Liked 661 Times
in
351 Posts
Meet Mr Old Fella (1938 CCM)
I posted about this bike several months ago but only recently got it into the basement to work on it. My only objective was to get it rideable again; that part was surprisingly easy!
Anyway: obligatory before picture:
After its maiden ride today:
There's a bunch more detail shots here:
38 Ccm Cleaned Up Story by Mark Kaczmarczyk (markk900) | Photobucket
Overall though, its rideable with only one issue - the pedal hole for the crank on the chainring side is either slightly cross threaded or bent - the new/old pedals (English, maybe Phillips) I put on to replace the hideous generic japanese pedals that were on there went on fine but one is definitely off perpendicular by a bit;
Not going to do anything cosmetic; now starts the long search for period or original bits to replace the obviously incorrect saddle; handlebars; wheels, tires. Also looking for CCM chainring bolts to fit as there is one missing (why on almost every CCM I have seen, in person or online, is at least one of those bolts missing?)
Anyway: obligatory before picture:
After its maiden ride today:
There's a bunch more detail shots here:
38 Ccm Cleaned Up Story by Mark Kaczmarczyk (markk900) | Photobucket
Overall though, its rideable with only one issue - the pedal hole for the crank on the chainring side is either slightly cross threaded or bent - the new/old pedals (English, maybe Phillips) I put on to replace the hideous generic japanese pedals that were on there went on fine but one is definitely off perpendicular by a bit;
Not going to do anything cosmetic; now starts the long search for period or original bits to replace the obviously incorrect saddle; handlebars; wheels, tires. Also looking for CCM chainring bolts to fit as there is one missing (why on almost every CCM I have seen, in person or online, is at least one of those bolts missing?)
#2
Senior Member
Join Date: Sep 2011
Location: Central Ohio
Posts: 726
Bikes: Waterford R33, 2019 Infinito, Gunnar Roadie, 1999 Colnago Tecnos, '04 Cannondale Optimo 800 & '51 Rudge Sports, Colnago Tecnos, Tom Kellogg Merlin..
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 55 Post(s)
Liked 140 Times
in
41 Posts
Good to see old bikes given another chance.
#3
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
Interesting bike, nice find! I'm inclined to think the wobble you feel in the pedal is caused by a bent crank arm. It takes very little bend to get that uneven feeling. That's a pretty easy fix.
#4
Senior Member
With the rear facing dropouts that would pass for one of those messenger bikes the kids rode in the teens and twenties.
That will be an awesome bike when you get it rolling well!
That will be an awesome bike when you get it rolling well!
#5
Senior Member
Wow - CCM had a great head badge in 1938.
#6
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 656 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,047 Times
in
1,882 Posts
Nice 1938 CCM Road Racer in a factory custom colour.
#8
Senior Member
Join Date: Dec 2010
Location: B.C.
Posts: 189
Bikes: ritcheys{2** rm blizzard Geo elrick drop frame and acollection of parts bikes in waiting
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
ccm
Some of these bikes were Reynolds plain gauge, I had a Flyer, The Sports Museum In Van. BC has Torcy Pedens old CCm
#9
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,859
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2299 Post(s)
Liked 2,062 Times
in
1,259 Posts
Overall though, its rideable with only one issue - the pedal hole for the crank on the chainring side is either slightly cross threaded or bent - the new/old pedals (English, maybe Phillips) I put on to replace the hideous generic japanese pedals that were on there went on fine but one is definitely off perpendicular by a bit;
Not going to do anything cosmetic; now starts the long search for period or original bits to replace the obviously incorrect saddle; handlebars; wheels, tires. Also looking for CCM chainring bolts to fit as there is one missing (why on almost every CCM I have seen, in person or online, is at least one of those bolts missing?)
Honestly, I don't think you can find original rims with rubber. I know at least 5 guys with the rims and none of them are rideable. Original hubs were Philips. I think I have a correct rear brakeset if you're interested.
Bars are upper right. They are narrow at top and flare out quickly.
#12
Senior Member
Thread Starter
Join Date: Jan 2007
Location: Ontario
Posts: 2,673
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 486 Post(s)
Liked 661 Times
in
351 Posts
It was definitely a "racer" in the same way as many of today's road bikes, but the true racer was the "Flyer"....you should see how thin the stays on that are!
#14
Senior Member
Thread Starter
Join Date: Jan 2007
Location: Ontario
Posts: 2,673
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 486 Post(s)
Liked 661 Times
in
351 Posts
There were 2 types. One threaded flush to the surface of the ring and the other type were longer and had nuts. edit looked at pics, you need long ones with bolts. Think I've got two. Your stem is correct. The bars are odd but you can find them.
Honestly, I don't think you can find original rims with rubber. I know at least 5 guys with the rims and none of them are rideable. Original hubs were Philips. I think I have a correct rear brakeset if you're interested.
Bars are upper right. They are narrow at top and flare out quickly.
Honestly, I don't think you can find original rims with rubber. I know at least 5 guys with the rims and none of them are rideable. Original hubs were Philips. I think I have a correct rear brakeset if you're interested.
Bars are upper right. They are narrow at top and flare out quickly.
#16
Standard Member
Join Date: Apr 2009
Location: Brunswick, Maine
Posts: 4,284
Bikes: 1948 P. Barnard & Son, 1962 Rudge Sports, 1963 Freddie Grubb Routier, 1980 Manufrance Hirondelle, 1983 F. Moser Sprint, 1989 Raleigh Technium Pre, 2001 Raleigh M80
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 955 Times
in
493 Posts
CCM is Canadian, right? (I remember their dirt bikes (motorcycles) in the 1970's, those and the CanAm) I was wondering what degree the headtube and seattube are. I love the deep angles on both of cycles of that period. Are you going to keep it a single speed? Are there Canadian period components? Very nice bike.
__________________
"In every job that must be done, there is an element of fun. You find the fun, and - SNAP - the job's a game!"
"In every job that must be done, there is an element of fun. You find the fun, and - SNAP - the job's a game!"
#17
Banned.
Join Date: May 2010
Location: The middle of nowhere, the center of everywhere!
Posts: 48
Bikes: 1998 GT Avalanche, Zunow Z-1, 1985/86 Gitane Professional, 1980 Raleigh Team, 1980 Apollo Gran Tour, 1937 Durkopp road racer
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 43 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#18
Senior Member
#19
Senior Member
Thread Starter
Join Date: Jan 2007
Location: Ontario
Posts: 2,673
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 486 Post(s)
Liked 661 Times
in
351 Posts
CCM is Canadian, right? (I remember their dirt bikes (motorcycles) in the 1970's, those and the CanAm) I was wondering what degree the headtube and seattube are. I love the deep angles on both of cycles of that period. Are you going to keep it a single speed? Are there Canadian period components? Very nice bike.
The bike was always single speed, though the rear wheel now is a coaster brake which is incorrect. As to finding Canadian period components, there's always hope! I did find a NOS Dunlop Speedster tire - but only one so far. And there are fans reproducing grips, so that I can find. Seat should be a Brooks so I will find something suitable (though for me suitable always includes cheap!). We shall see!
#22
Senior Member
#23
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,859
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2299 Post(s)
Liked 2,062 Times
in
1,259 Posts
I think you're right about those hex nuts not clearing the crankarm. I'll sent you one of each type NS use some loctite on the close ones. They often came with mudguards as well. Here's a 37 frame, NOS.
And here's a crank where the hex nuts clear the arms. Restortation and custom hex nuts by Tony Beeks of Toronto
And here's a crank where the hex nuts clear the arms. Restortation and custom hex nuts by Tony Beeks of Toronto
#25
Senior Member
Thread Starter
Join Date: Jan 2007
Location: Ontario
Posts: 2,673
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 486 Post(s)
Liked 661 Times
in
351 Posts
I think you're right about those hex nuts not clearing the crankarm. I'll sent you one of each type NS use some loctite on the close ones. They often came with mudguards as well. Here's a 37 frame, NOS.
And here's a crank where the hex nuts clear the arms. Restortation and custom hex nuts by Tony Beeks of Toronto
And here's a crank where the hex nuts clear the arms. Restortation and custom hex nuts by Tony Beeks of Toronto
And the pinstripes are very different....still - NOS is incredible.
Mark