Blackburn Floor Pump Repair
#1
Senior Member
Thread Starter
Join Date: May 2013
Location: Pacific Northwest
Posts: 2,011
Bikes: ‘87 Marinoni SLX Sports Tourer, ‘79 Miyata 912 by Gugificazione
Liked 514 Times
in
272 Posts
Blackburn Floor Pump Repair
My long trusty Blackburn TP-4 Trakpump Pro has a non-operating check valve. I’ve disassembled every connection that will come apart, but can’t get at that check valve, which I suspect is within the barrel. I can separate the barrel from the base and gauge assembly, but it appears to need a special tool to go farther. Any ideas on how to repair?
#3
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,341
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Liked 4,188 Times
in
2,471 Posts
The base of pump lives a hard life with the moisture and lack of frequent venting. I've seen more then a few with badly corroded bits down there. Good luck. Andy
#4
Senior Member
The fix would constitute replacing the pump... But Blackburn's modern [floor] pumps are a pale imitation of their older models, even from only a few years ago.
As for the OP, post a pic that you have of the disassembly so far--almost every pump I've seen is held together with a foot nut on the bottom.
As for the OP, post a pic that you have of the disassembly so far--almost every pump I've seen is held together with a foot nut on the bottom.
#6
Senior Member
Thread Starter
Join Date: May 2013
Location: Pacific Northwest
Posts: 2,011
Bikes: ‘87 Marinoni SLX Sports Tourer, ‘79 Miyata 912 by Gugificazione
Liked 514 Times
in
272 Posts
Yup. Wrote Blackburn describing this problem; no records or receipt from when I bought this pump (at least 20 years ago). They’re sending me a new pump. Pretty amazing warranty support.
#7
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,882
Bikes: Numerous
Liked 3,461 Times
in
987 Posts
That’s amazing. My 15 year old Blackburn died recently; replaced it with a Silca. Maybe I’ll send them a note with pics of the “pump in pieces” I tried to repair.
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
#8
Newbie
Join Date: Jan 2024
Posts: 1
Likes: 0
Liked 0 Times
in
0 Posts
Blackburn Trakpump sport TPS 2 --rebuild parts not available
Have non-working Blackburn trakpump sport TPS 2. Parts to rebuild not available any longer. 1/8/2024
More:
Disassembled, probably the plunger. Read threads below. Found spare parts catalog from Blackburn, nothing listed for Trakpump models.
Called spare parts number 800-7765677 on spare parts web site.
Explained problem with pump, asked about spare parts. There are none. Explained I have no warranty documentation, person said failure covered under lifetime warranty and that a replacement would be sent.
More:
Disassembled, probably the plunger. Read threads below. Found spare parts catalog from Blackburn, nothing listed for Trakpump models.
Called spare parts number 800-7765677 on spare parts web site.
Explained problem with pump, asked about spare parts. There are none. Explained I have no warranty documentation, person said failure covered under lifetime warranty and that a replacement would be sent.
#9
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 14,659
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Liked 4,569 Times
in
3,060 Posts
Have non-working Blackburn trakpump sport TPS 2. Parts to rebuild not available any longer. 1/8/2024
More:
Disassembled, probably the plunger. Read threads below. Found spare parts catalog from Blackburn, nothing listed for Trakpump models.
Called spare parts number 800-7765677 on spare parts web site.
Explained problem with pump, asked about spare parts. There are none. Explained I have no warranty documentation, person said failure covered under lifetime warranty and that a replacement would be sent.
More:
Disassembled, probably the plunger. Read threads below. Found spare parts catalog from Blackburn, nothing listed for Trakpump models.
Called spare parts number 800-7765677 on spare parts web site.
Explained problem with pump, asked about spare parts. There are none. Explained I have no warranty documentation, person said failure covered under lifetime warranty and that a replacement would be sent.
#10
Newbie
Join Date: Apr 2024
Location: Ohio, USA
Posts: 1
Bikes: Trek Y-foil 66 bought in 1998
Likes: 0
Liked 0 Times
in
0 Posts
I did the warranty thing. Receiced a Blackburn Core Pro free of charge. Doesn’t work worth a damn. Have to pump like a madman to get even a little pressure, and then only get pressure in the last couple of inches of every stroke. By the time I get 115psi in my road tires I’m too pooped to ride.
#11
Yeah, that happens to me once in a while with the Leyzne floor pump I have. If I remove the head from the valve and re-seat it a couple of times it then pumps as it should. Seems the pump head is on either too far or crooked or something else, but it does happen to even the pricey pumps. FWIW the Silca pump I have had since 1986 has never done this and it still works perfectly when I use it. The Leyzne was a gift so I use it in the basement shop. The garage shop has the trusty Silca.
#12
Senior Member
Do Zombie threads come out from 2017 like ciccadas?...
Likes For wheelreason: