Bicycle Brakes Standard
#1
Full Member
Thread Starter
Join Date: Apr 2019
Location: Albuquerque, NM
Posts: 490
Bikes: 2022 Priority Coast, 2022 Priority Current
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 175 Post(s)
Liked 137 Times
in
99 Posts
Bicycle Brakes Standard
Hello,
Just curious. Is there an industry standard for where front and rear brakes are activated on the Handlebars. Specifically RH Levers are rear brakes and LH levers are front brakes? What is the history on this? Background? Thank You.
Just curious. Is there an industry standard for where front and rear brakes are activated on the Handlebars. Specifically RH Levers are rear brakes and LH levers are front brakes? What is the history on this? Background? Thank You.
#2
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 644 Times
in
365 Posts
I don't know if there is a written standard anywhere, but it's certainly common practice for the right hand to operate the rear brake and vice versa. I heard somewhere that's. because the right hand operates the rear shifter so the two functions would be similar but I don't really know for sure. Many brake calipers and cable guide locations have obviously been designed to facilitate this arrangement.
I can also tell you that I've reversed the brake operation for several customers who also ride motorcycles and wanted their bicycle to operate similarly.
I can also tell you that I've reversed the brake operation for several customers who also ride motorcycles and wanted their bicycle to operate similarly.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#3
Senior Member
There was a discussion about this in a paper copy of Bicycle Quarterly a few years ago. A few riders do switch, and prefer it that way, but it might be confusing if someone borrows the bike.
#4
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,697
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1705 Post(s)
Liked 1,899 Times
in
1,098 Posts
In the United States, bicycles are regulated as toys by the Consumer Product Safety Commission (rather than as vehicles by the Department of Transportation).
Requirements for bicycles being sold, new, at retail, are specified in Requirements for Bicycles 16 C.F.R. Part 1512.
Concerning the placement of hand brake levers, it says: Unless a customer specifies otherwise, the hand lever that operates the rear brake must be on the right handlebar. The lever that operates the front brake must be on the left handlebar. A lever that operates both brakes may be on either handlebar.
The purchaser may specify the other orientation.
This requirement only applies to the initial sales of new bicycles.
This orientation is the opposite of that specified by the Department of Transportation for motorscooters and motorcycles.
There may be some state or local requirement that augments this, but that's unlikely.
Requirements for bicycles being sold, new, at retail, are specified in Requirements for Bicycles 16 C.F.R. Part 1512.
Concerning the placement of hand brake levers, it says: Unless a customer specifies otherwise, the hand lever that operates the rear brake must be on the right handlebar. The lever that operates the front brake must be on the left handlebar. A lever that operates both brakes may be on either handlebar.
The purchaser may specify the other orientation.
This requirement only applies to the initial sales of new bicycles.
This orientation is the opposite of that specified by the Department of Transportation for motorscooters and motorcycles.
There may be some state or local requirement that augments this, but that's unlikely.
#5
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,697
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1705 Post(s)
Liked 1,899 Times
in
1,098 Posts
The idea was that as the cyclist has just one hand on the bars as they signal a turn or stop,
using the arm signals adopted from automobiles
it was safer to have the remaining (right) hand on the bars operate the rear brake, making flipping the bike impossible.
using the arm signals adopted from automobiles
it was safer to have the remaining (right) hand on the bars operate the rear brake, making flipping the bike impossible.
Last edited by tcs; 12-28-19 at 09:31 AM.
#6
Full Member
Riding on the left!
I heard some discussion on this topic while watching the Tour of California early this year. Tejay van Garderen was one of the leading riders when he had a mechanical at a critical stage of that day's race. One of his teammates came by and gave up his bike. Tejay took off after the lead group. He soon came up on a tight right hand turn, but instead of leaning into the turn he skidded off the road!
According to the race announcers, the teammate who gave up his bike was from Australia, where they drive on the left, and his levers were reversed; left lever controlling the rear and right lever controlling the front.
I didn't hear any more about it but it seemed to make sense to me...
According to the race announcers, the teammate who gave up his bike was from Australia, where they drive on the left, and his levers were reversed; left lever controlling the rear and right lever controlling the front.
I didn't hear any more about it but it seemed to make sense to me...
#8
Half way there
Join Date: Sep 2015
Location: North Carolina
Posts: 2,958
Bikes: Many, and the list changes frequently
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 990 Post(s)
Liked 885 Times
in
530 Posts
I switched to a Right-Front, Left-Rear about 10 years ago after a very scary panic stop. Having my dominant right hand actuate the most effective brake allows me to stop quicker with much more control.
#9
Senior Member
Join Date: Feb 2014
Location: Pasadena, CA
Posts: 4,848
Bikes: Schwinn Varsity
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1931 Post(s)
Liked 742 Times
in
422 Posts
I prefer front brake on the right, rear on the left. For me makes more sense. Motorcycle front is on the right, and in the case of older British motorcyles 50s and 60s, the gear shift was also on the right.. rear brake on the left.
Panic stop, go to your left to grab rear brake and clutch... on the left. I would never grab the front brake in a panic stop.
I'm also left handed.
Panic stop, go to your left to grab rear brake and clutch... on the left. I would never grab the front brake in a panic stop.
I'm also left handed.
Likes For trailangel:
#10
vespertine member
Join Date: Jul 2013
Location: Land of Angora, Turkey
Posts: 2,476
Bikes: Yes
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 687 Post(s)
Liked 220 Times
in
163 Posts
My own thought, back when I rode fixed a lot, was exactly the opposite: my dominant (right) hand should control the brake with more stopping power. Flipping was fortunately never an issue.
I still keep the brake levers reversed (right-front, left-rear) on my single speeds, but normal on bikes with derailleurs and STI. (I'm also mixed dominant, right handed and left footed, so keeping track of what limbs are supposed to be doing is pretty normal.)
#11
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,612
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,099 Times
in
5,054 Posts
Right rear is so hardwired into my brain at this point that I'm pretty sure I'd hurt myself if they were flipped. Funny if it really was because of the hand signal thing because that's a really bad reason.
#12
Been Around Awhile
Join Date: Oct 2004
Location: Burlington Iowa
Posts: 30,027
Bikes: Vaterland and Ragazzi
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Liked 1,590 Times
in
1,073 Posts
In Germany, the opposite is the standard configuration for location of hand brake levers.
#13
Senior Member
Join Date: Oct 2017
Location: Chapel Hill NC
Posts: 1,683
Bikes: 2000 Litespeed Vortex Chorus 10, 1995 DeBernardi Cromor S/S
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 645 Post(s)
Liked 797 Times
in
446 Posts
growing up in Ireland and the UK, right/front was standard, and I’ve maintained that ever since because it makes sense for a right-handed person. Your dominant hand - be it left or right - has the most strength and modulation - that’s the hand that should be operating the brake that does 75% of the braking
#14
Senior Member
Join Date: Mar 2013
Location: Tucson Az
Posts: 1,711
Bikes: 2015 Ridley Fenix, 1983 Team Fuji, 2019 Marin Nail Trail 6
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 344 Post(s)
Liked 251 Times
in
152 Posts
I prefer front brake on the right, rear on the left. For me makes more sense. Motorcycle front is on the right, and in the case of older British motorcyles 50s and 60s, the gear shift was also on the right.. rear brake on the left.
Panic stop, go to your left to grab rear brake and clutch... on the left. I would never grab the front brake in a panic stop.
I'm also left handed.
Panic stop, go to your left to grab rear brake and clutch... on the left. I would never grab the front brake in a panic stop.
I'm also left handed.
#15
I'm the anecdote.
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,821
Bikes: '12 Schwinn, '13 Norco
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times
in
795 Posts
And word is that Great Britain, Japan, and other countries that drive on the left side of the road is the basis for the arm signals being done by the right arm. Which would be a reason for the front brake to be on the right of a bicycle.
#16
Dirty Heathen
Join Date: Oct 2015
Location: MC-778, 6250 fsw
Posts: 2,224
Bikes: 1997 Cannondale, 1976 Bridgestone, 1998 SoftRide, 1989 Klein, 1989 Black Lightning #0033
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 897 Post(s)
Liked 950 Times
in
553 Posts
All of my bikes (velo) have been RH-rear for brakes and shifting, even my mid-70s Japanese-built-and-sold road bike. Never felt like it was 'wrong' I just learned to ride it the way it's set up.
Likewise all of my motos have been modern american and japanese, so the levers are the 'moto' conventional (RH-throttle/brake, LH-clutch) Never had problem with that.
Never had a problem transitioning between velos and motos and grabbing the wrong lever in an 'emergency' I instinctively know what kind of bike i'm on and act accordingly.
Besides, braking on a bike, even in a high speed or technical trail situation requires a lot less dexterity than say, playing the piano or violin. I can't play piano, but i can brake or clutch pretty well with either hand.
Likewise all of my motos have been modern american and japanese, so the levers are the 'moto' conventional (RH-throttle/brake, LH-clutch) Never had problem with that.
Never had a problem transitioning between velos and motos and grabbing the wrong lever in an 'emergency' I instinctively know what kind of bike i'm on and act accordingly.
Besides, braking on a bike, even in a high speed or technical trail situation requires a lot less dexterity than say, playing the piano or violin. I can't play piano, but i can brake or clutch pretty well with either hand.
#17
I'm the anecdote.
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,821
Bikes: '12 Schwinn, '13 Norco
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times
in
795 Posts
I prefer front brake on the right, rear on the left. For me makes more sense. Motorcycle front is on the right, and in the case of older British motorcyles 50s and 60s, the gear shift was also on the right.. rear brake on the left.
Panic stop, go to your left to grab rear brake and clutch... on the left. I would never grab the front brake in a panic stop.
I'm also left handed.
Panic stop, go to your left to grab rear brake and clutch... on the left. I would never grab the front brake in a panic stop.
I'm also left handed.
Likes For FiftySix:
#18
Cycleway town
In Britain we have the front on the right, with UK spec bikes.
#19
Senior Member
Join Date: Oct 2016
Location: San Mateo,Ca.
Posts: 4,003
Bikes: TRIMMED DOWN THE HERD
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1097 Post(s)
Liked 953 Times
in
609 Posts
RH-rear for me ever since I was a kid so I don't see myself switching. If I ever end up in a country with the opposite, I'll make sure to remember the switch!
#20
Member
About two years ago I was talking with a bicycle cop who was complaining that when he pursued someone and tried a quick dismount he had trouble controlling the bike because he tended to lock the front when doing a simultaneous hard stop and dismount. I suggested that he have the bike mechanic switch the cables so the left brake controlled the front. Next time he saw me he couldn't thank me enough and that most of his fellow officers had requested a similar change.
My small contribution to fighting crime. 🙂
My small contribution to fighting crime. 🙂
Likes For MAK:
#21
Half way there
Join Date: Sep 2015
Location: North Carolina
Posts: 2,958
Bikes: Many, and the list changes frequently
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 990 Post(s)
Liked 885 Times
in
530 Posts
It's a good idea to shift your weight to the rear during a panic stop regardless of which hand controls which brake. This maneuver should be practiced so that it is automatic.
#22
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,697
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1705 Post(s)
Liked 1,899 Times
in
1,098 Posts
BTW, we get our miles (kilometers) in, do intervals and climb & decend. IMO it's also a good idea to go down occasionally to an empty parking lot (car park) and practice braking from various speeds. Again IMO, a truly competent road cyclist should be able to lift the rear wheel in a controlled stop without flipping, and brake hard with the rear tire (tyre) in contact with the ground and just barely not skidding. Also nice to know how to get one's self down a BIG descent on the personal cycle w/o overheating the brakes, rims, tubes, etc.
#23
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,697
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1705 Post(s)
Liked 1,899 Times
in
1,098 Posts
As mentioned, the USA's CPSC regulates bicycles as toys, and they had to consider the safest standardization for untrained/self-taught children.
Of course in the real world, kids don't use hand signals, but still...
#24
Been Around Awhile
Join Date: Oct 2004
Location: Burlington Iowa
Posts: 30,027
Bikes: Vaterland and Ragazzi
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Liked 1,590 Times
in
1,073 Posts
Wasn't right hand-rear wheel, left hand-front wheel already the typical if not standard configuration for bicycles sold in the USA without coaster brakes before CPSC regulations were promulgated?
#25
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,612
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,099 Times
in
5,054 Posts
Ultimately, in this case, it probably didn't matter which standard was applied as long as there was one standard. I'm very right-hand dominant, but I don't think there's any significant difference between control of my right vs. left brake handle.